Reviews
Safe during maintenance!
I used to use two Uma for Vehicles, but they were not as stable as they could be
I have been able to maintain this STAND with peace of mind since I purchased it I should have purchased it sooner!
When you are not driving your car, you can put it on this STAND and look at your car to see the atmosphere in the garage I think the first time I saw it, I was able to buy it I can buy it for 1299 yen in real terms because I used webike's Point, and it is very I was grateful for the
This STAND is a mini type, so you need to lift up your rear and put it on STAND So the body of GORILLA is light, but the body of the GORILLA is caught in Smooth You may not get on the
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
No problem
The bulb of DT50 Speedometer was out, so I replaced it I'm glad to hear that the light came back on safely There is still no problem after 6 months View detail
periodic replacement
Price and Quantity:1 Set of 2pcs It is purchased with other products on Oilfor Replacement
It's a consumable product and that's enough
View detail
Fits: HONDA LITTLE CUB, HONDA LEAD, HONDA LIVEDio ZX, HONDA MONKEY, HONDA MOTRA, HONDA BENLY50S, HONDA DAX50, HONDA GIORCUB, HONDA JOKER Helmet, HONDA GYRO, HONDA CHALY, HONDA GORILLA, HONDA CABINA, HONDA XL200R, HONDA XL250R, HONDA XLR250, HONDA XLR250R, HONDA TLR200, HONDA NSR80, HONDA SUPER CUB
I am complaining.
I'm modifying the LITTLE CUB to make it TRIAL-like Battery reply is used as a part of weight saving This system is the best in cost effectiveness, very light weight and high performance Tail lamp is LED, so it lights up even when the engine is stopped It is not possible to turn on the "Blinker" because it is a normal valve, but I think it will turn on if you use LED The blinker is unnecessary when stopping the neutra lights up on on and it's quite capacious
View detail
I can't install it
The position of the Bracket to the Frame is not right at all
Also, the intake is in a bad position and obviously not going to work
It's going to be just a decoration
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
No complaints with an investment of just over $1,000
Installed on the 2019 AA09 SUPER CUB 50
My complaint about the CUB is that it's too low GEARd for some reason The first Driven Sprocket has a 13T, I converted it to a 15T It is as large as you can get
The aim of the conversion
It's a quick, low cost way to get rid of frustration
After conversion
1st gear is now available 。 Before the conversion, the engine roared in 1st gear and the speed was not as fast as it should have been It was
So, it was always second gear 。 If I wanted to, I'd like to pull more and connect it to second gear, but it's 50cc, so that would be a compromise
The connection of each GEAR becomes Smooth, and it is pulled by each GEAR, and at the end it is connected to the Top It was able to pull enough on the flat terrain
In a headwind or on an uphill slope, I'd like to downshift the car, but I'm not sure if the top speed will be as high as it should be It's a Large Merit
In other words, it means that you can ride in the city and in the flow of traffic, which means that you can drive safely (see (The CUB couldn't get into the flow of the city because of the lack of speed)
Installation notes
There is a U-shaped Sprocket guard inside the Sprocket Cover, after the conversion As it is, this Sprocket guard and the Chain will interfere with each other, so the
The Sprocket Cover won't close, and it looks like you all have a lot going on the..
T=about 2mm of resin Washer is inserted in place of the Sprocket guard I made the Sprocket Cover close. 2 Washer with Red Arrow
General review
For an investment of a little over $1,000, you can ride with a good feeling, so you can't complain
View detail
Required for oil changes
I have used Drain with both KIJIMA and OEM and it worked fine
There are a lot of aluminum packings, so copper is very rare
I recommend it for a good price
Aluminum is too crushed and can get caught in the Bolt
I don't really want to use it, personally
You can use one piece twice if you don't squeeze it with Overtorque
View detail
For regular replacement
I bought it to try out for use when changing the oil, but the price is cheap, and it comes in a pack of 2, so I have to replace it regularly This is a good product for I would purchase and use it again next time View detail
It's cost effective compared to OEMs
The OEM product is too expensive to buy, so we can't afford this Universal Buy Product
The surface paint and details are crude, but it's cheap, so it makes sense
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
Things are nice and solid for the price!
I installed the item as soon as it arrived, and I'm glad I didn't have any problems with it!
The quality of the product is very solid and good in appearance, we will have to wait and see how it holds up I didn't dare rate it because it's not there, but it's also lightweight and based on the price, it's total I thought it was a good product
View detail
Fits: HONDA CHALY 50, HONDA CHALY 70, HONDA DAX, HONDA DAX70, HONDA Nauty Dax, HONDA DAX, HONDA CHALY 50, HONDA CHALY 70, HONDA DAX70, HONDA Nauty Dax
Meatless is the way I like it
I wanted something as large as possible so I bought the 39T
The BALI was clean with almost no BALI
The surface is textured like Diamond sandpaper, and the color is the color, so the oil stains are It's noticeable
I don't know about the durability as I haven't used it that much yet
View detail
I think this quality is good for the price!
I think the quality is good for the price
But it seems to be too much for a car with a large chassis
Just right for MT-03
Brake, Chain, Sprocket, etc
I think it's necessary for those who make maintenance better
I'm not using the Front
It looks fine
View detail
To use
I used it on my Kawasaki Z2, it works great, now I'll use it on my TDR20 I used to build without RingCompressor, but it's still easy, Home! I bought a aluminum block at center and made a PistonStopper by myself Then you can put in 4 cylinders with Scauper
View detail
No problem
Because Bolt is Aluminum, I thought that copper of the different material was good
I bought this one
I was looking for something as inexpensive as possible since it's a consumable product
It's helpful There is no difference between the expensive and cheap ones
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
It's good and well done for the Gold amount
Maintenance for MONKEY125, good height, chain and Tire, no Center Stand for foil maintenance Motorcycle Necessities View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
It looks great, doesn't it?
I've been wanting to wear a gold chain for a long time
Body color and Balance are the best?
I love the look and the unique shine of the Gold chain
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
The price is reasonable, well built and satisfactory
I use it for groms with the width as wide as possible, but it's well made and easy to use for the price It's easy
It's good strength and doesn't wobble
View detail
Oh well
I use it on the Grom 1 and it hits the bottom part of the headlight a little as it is It is not impossible to use it, but I extended it by welding the insertion part of the headlight It's ready to be used in a batch View detail
Perfect fit
These 6 volt bulbs were a perfect fit in my headlight and instrument cluster on my 1976 Honda Z50. Also used one of the bulbs for the rear tail brake light lamps. View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
It can be used without problems
I used it on my 125cc APE Good value for the price Is Performance? There is no problem with the enemy View detail