Reviews
Good clean Seat.
The product arrived and I installed it right away. However, the Seat lock
I was troubled because I could not
The solution is to put a Bracket under the Seat lock, and make the height 0.5mm.
Seat lock is now applied when raised.
I liked the Large change because it looks good and is comfortable.
View detail
Diversion to GORILLA's Custom
Purchased for repair of GORILLA, same shape as OEM Product, made of plastic, but the plating is in good condition and the price is reasonable. View detail
Fits: HONDA MONKEY, HONDA GORILLA
CoilBracket
for MONKEYCoilBracket when using Uotani View detail
Emblem
Installation is not possible without relocating OEMHorn.
So we need to work from the relocation of Horn first.
Bracket is included in the Mounting Kit and can be easily installed using the OEM bolt.
View detail
Fits: HONDA monkey, HONDA dachshund, HONDA monkey, HONDA dachshund
OEM has been cut off.
[How is it used?
The band that had deteriorated when replacing the battery in the neglected DAX was cut off.
I found this place where I order OEM Parts. I purchased it.
Was the one you received as per Image?
The texture of the Level is so similar to that of an OEM product that it would not be recognizable if it were not called an Other Brand Product.
How was your experience with it?
The size was perfect. I think it is a little bit hard to put Band on.
[Points to note]
After all, Material:Since it is Rubber's Band, it is prone to deterioration.
I thought it would be a good idea to replace them regularly.
How did it compare to other products?
The price is also low, so if ordering OEM parts is a hassle, this is a good option.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
nothing special
View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Frame Mount Bracket
About quality and texture It's of high quality and well-organized About the feeling of use I installed it in ape100, but I couldn't install it neatly But I think the product is okay Products to buy together SPII Universal High Power Coil Difficulty of installation If you want to install it in ape100, it doesn't fit so you can't install it easily. Cost performance and comparison with other products It can be purchased cheaper than SPII Universal High Power Coilset for APE100 only, but it is difficult to install About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing Recently, it was changed to ngk power cable, but it was purchased to increase the number of startups, but the app 100-only product was expensive, so it was well installed by purchasing SPII Universal High Power Coil and Monkey Frame-mounted bracket together. View detail
not bad, but ...
I think the cosmetics are better than OEM.
The plating is very clean at a glance, with no irregularities.
If you look closely, you can see vertical lines here and there that appear to be PRESS scratches? Vertical lines can be seen here and there during processing, which appear to be PRESS scratches.
I don't mind it much, but I guess those who care would be bothered by it.
There was no distortion or deformation, which is typical of Chinese Parts.
View detail
Rigidity, texture, and lightness are good, but be careful of interference when using with custom parts.
The texture is good for the price. I don't like the flashy shiningly, so the matte finish is good. The bar is also rigid and does not shake even when hanging the rear end of the car from the ceiling with a ceiling hook on this bar.
Please note the following customizations on your vehicle
The Daytona Carrierless kit interferes with the Carrierless kit. We solved this problem by cutting the interference part of the Carrierless kit.
GORILLA's SeatRear is a little bit closer to the back than MONKEY's, so the both ends of SeatRear interfere with the custom seat of the type in the picture.
View detail
Fits: HONDA SUPER CUB 50, HONDA CHALY 70, HONDA CHALY 70, HONDA CHALY 50, HONDA CHALY 50, HONDA CHALY 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA CHALY 70
The cap on the gas tank on the Super Cab
The cap on the gas tank on the Super Cab Custom fit without problems. It twists very tightly and tightly, which makes it possible not to spoil gasoline. But there is no key - pay attention to this if it matters to you.
The photo shows the installed cover on the moped and also a comparison with the old original cover with a key.
The quality is average, but the price is also inexpensive. -------------------------------------------------- -------- The lid on the gas tank on the Super Caster Caster approached without problems. Spins very tight and hard, which makes it possible not to spoil gasoline. But there is no key - pay attention to it if it is important for you.
In the photo installed cover on the moped and also comparison with the old original cover with the key.
Quality is average, but also price is cheap.
View detail
not bad
It is a Chinese part, but the plating is clean and can be used normally.
It also has a rubber cushion in the mounting hole.
View detail
I'd put this on if I ever lowered my Fender!
I installed it together with the Down fenderKit and it fits nicely where I relocated the Horn.
The quality is good, and I was not sure about KITACO, but I think it is the right choice.
I didn't like that the headlight hid Honda's emblem when I saw it from the front.
I think it's a very good product at a reasonable price.
View detail
To Ron TwoSpec.
Backpack for short distance touring
I've always wanted a box for the long haul.
I bought it because I thought it would be more convenient to have it.
In combination with YOSHIMURADown Type Exhaust System
I'm still a little nervous about Nut's tightening length…
I guess I'll have to retighten it periodically.
View detail
I had to cut it down.
I put it on my MONKEY125.
The Left Side hole was not aligned and I had to cut it with a Stick File.
(It's better to use Carrier instead of Frame for grinding)
The installation itself is not difficult.
The design is simple and matches the car body.
ShockMount Bolt's Spacer is the Smaller of the two.:1pc. It's better to remove it.
See Net Info for FrameBolt 22Nm.
I tightened it with ShockMount Bolt 29Nm.
View detail
Fits: HONDA monkey, HONDA dachshund, HONDA monkey, HONDA dachshund
The Battery is securely fastened.
I replaced the Elastic band that holds the battery in place before the trouble happened. I was able to fix it firmly and the price was very reasonable. View detail
Seat catcher interferes
At 6V, the Seat Catcher's Lever will interfere.
You can get around this by bending the Lever to a right angle, but it's a pretty heavy workout.
If you don't have Large pliers like water pump pliers, it's a little strange.
Or we could do without the Seat Catcher.
The 12V DAX probably won't have this problem because the Seat Catcher is shaped differently.
I would have liked an explanation of that before I bought it.
View detail
DAX Seat on MONKEY
Make a bracket at the front part with two L-shaped universal brackets.
The Seat Catcher of the Rear thinks what to do from now on, but made the Bracket which makes the Rear Carrier and the Tail lamp deviate from the rear, and took the whole balance.
The bike has now evolved from a monkey to a dog monkey, and is now a Motorcycle with the freedom to take riding positions.
View detail
It looks tighter.
As others have written, it tightens up the look.
It's a bit stiff and the mounting is a bit odd, but it's solid.
Even if you push it in with force, it won't break.
I put it on the X4LD as well as APE, but the screw holes are just right.
I was able to pimp it out because it was there.
View detail
Front fork!
I bought and installed this one as Accent The look and design is good
I made a hole in the bracket sleeve part because it was a little off the threaded hole
There were no problems with the rest of the installation
View detail
OEM-ish
The OEM has been discontinued I don't have any complaint about the installation, but the included bolt is not very good and the neck is too long The color of the Plating is not even worth talking about, so I will replace this one at a later date Also, I had no problems with it, but the instruction manual was also completely unintelligible
View detail
Wow that's cool
It's just an emblem, but it's cool It's easy to install and I don't mind if it's an OEM part I'm glad I bought this part View detail