Reviews
One word:cheap.
Purchased for the purpose of diversion. The plating is beautiful and the edges are well treated. If I were to raise a bad point, it is heavy. The thickness of the steel plate makes it look strong. View detail
Seat catcher interferes
At 6V, the Seat Catcher's Lever will interfere.
You can get around this by bending the Lever to a right angle, but it's a pretty heavy workout.
If you don't have Large pliers like water pump pliers, it's a little strange.
Or we could do without the Seat Catcher.
The 12V DAX probably won't have this problem because the Seat Catcher is shaped differently.
I would have liked an explanation of that before I bought it.
View detail
Used for 12VMONKEY
I put a Fender on temporarily for a change of pace.
I'm going to buy the OEM Plating fender because it looks like a good atmosphere.
Cheap and for reference.
The Bracket is self-made in position.
If you buy a slightly expensive OEM and it's weird, it's a Shock, lol.
View detail
Used for 12VMONKEY
Originally it was the same color as the Body, but for the sake of the Me Chain.
I installed it as a test run and it looks good.
By the way, Small work was necessary to match the line with Tire.
So I'm going to buy an OEMFender.
It's only for Samples.
It's cheap.
View detail
DAX Seat on MONKEY
Make a bracket at the front part with two L-shaped universal brackets.
The Seat Catcher of the Rear thinks what to do from now on, but made the Bracket which makes the Rear Carrier and the Tail lamp deviate from the rear, and took the whole balance.
The bike has now evolved from a monkey to a dog monkey, and is now a Motorcycle with the freedom to take riding positions.
View detail
It looks tighter.
As others have written, it tightens up the look.
It's a bit stiff and the mounting is a bit odd, but it's solid.
Even if you push it in with force, it won't break.
I put it on the X4LD as well as APE, but the screw holes are just right.
I was able to pimp it out because it was there.
View detail
Does it look great?
The build is Simple, but the installation is Exactly right and looks great?
Cost-effective and satisfactory?
When you think of the 4MINI, this is it, right?
View detail
Fits: HONDA MONKEY, HONDA GORILLA
I was wondering if the door wouldn't lock
Purchased to install in the China Tank
I saw the Cap shape that I was previously hooked on and ordered it
Size is good, but it's not so bad
I can't lock my keys
Hmm?
It's the same shape, but..
You can push in quite a bit from the top and turn the key while lowering the front down
We have a lock on it
Is it because Rubber is hard?
I'm hoping that it will be easier to lock if it's fitted
View detail
Fits: HONDA APE 50, HONDA GORILLA, HONDA MONKEY
It's fine!
Order to put a Chinese Tank on it
I haven't fitted the front mount yet
The rear mount was the right size
Isn't that fine!
View detail
Front fork!
I bought and installed this one as Accent The look and design is good
I made a hole in the bracket sleeve part because it was a little off the threaded hole
There were no problems with the rest of the installation
View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It's for mounting to a Watchman
I purchased Exclusive Bracket and installed it when I installed Otani Body It was able to install easily without any modification It seems to be very durable View detail
Sub tank!
It was installed in DAX70 As you know, the capacity of the fuel tank of DAX is small to die
2.It's about 5L and that's it for a neighborhood leg, but it's a little farther out or suburban Service It's very difficult to go to a place with fewer stations..
I've had a spare Gasoline Carrying Can in the past, but this I've chosen Sub Tank!
The Hose from the Sub tank is connected to the Fuel Cock's RES and the MainTank's I reconnected Reserve to the Cook's Main Now I've used up the MainTank to Reserve, and then I'm going to use the Sub tank in this case If you switch, you can use Gasoline to its full potential
Mounting is done on the Left Side of the DAX bodywork Mounting is done by BoltQuantity:It's an easy 2pc installation
The capacity itself is about 1 liter, so it's really a spare W. It's dangerous to be overconfident It's okay, it's a Sub tank and it has a low capacity It's just cool to have it on!
Also, the tank cap does not have a Key
View detail
OEM-ish
The OEM has been discontinued I don't have any complaint about the installation, but the included bolt is not very good and the neck is too long The color of the Plating is not even worth talking about, so I will replace this one at a later date Also, I had no problems with it, but the instruction manual was also completely unintelligible
View detail
Wow that's cool
It's just an emblem, but it's cool It's easy to install and I don't mind if it's an OEM part I'm glad I bought this part View detail
It's not strong enough
The bracket broke after 200km or so, even with the silencer band It's not strong enough and the bracket is not thick enough
I had no choice but to scrape off the original bracket and use Silencer bandQuantity:I use 2pc and make a Bracket on the body side
View detail
Once installed, it's so easy to use!
It was hard to install it Although the picture is marked with a yellow circle, it is not aligned with the mounting screw hole, so I had some trouble to install it It was off The Handling Instruction Manual also has notes on it, but I can't help it No match
This is not so much the accuracy of the Carrier, but rather the misalignment of the screw holes in the car body I'm not sure I doubt that other bolts have been over the regulation value I think there is a difference
Included Parts:Bolts not used, from Included Parts:Smaller Bolts Smaller bolts were used and installed
Once installed, it is very easy to use, and since the cargo bed is Seat and Flat, it is very easy to use when it is not loaded I like the look and feel of the
View detail
A touch of class
A small part who give really a touch of class, affirming the Honda brand when Monkey is saw in front. Easy to fit. Also can be used to deport the horn from its original place. (the horn-grid is home made, be careful like this it can touch the fender, then It was necessary to move it back and higher...) View detail
Fits: HONDA GORILLA, HONDA MONKEY
I am satisfied
I decided to do a Refresh of the ignition system and I bought it because I put in a Votani!
It's from another Manufacturer, but I didn't like Designetc Made in Minimoto (Simple) I chose the
I have no problems putting it on and I use it safely
View detail
The Front's condensation is restored
Image of the mass of the body connected to the front fender from the body to the front fender
The soles that were mourned in the relocation of Down fender and Horn will be restored
It's like the Monkey 125
View detail
Not worth $9,600
Please note In my Initial ModelDAX, you need to remove the Helmet holder to be able to The only thing I can think of is that it's not a bad thing It is a large red letter with a return shipping cost of 960 yen though the description of the product is insufficient It's a good thing that the direction of the hose connection of the Fuel Cock is not in front of the carburetor You shouldn't do this, but it's facing backwards, so the hose will be 180°UTurn If you want to install it on the Left Side, please use No.0841 ($8,100) There is no Fuel Cock, but it is still better because the entrance to the Hose is facing forward However, I think that the Helmet holder cannot be installed if I see it in the movie When you buy it, please consider well View detail