Reviews
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
There was a Gasoline leak.
Previously, I bought it from another company and it was leaking after about 5 years.
I have been driving MONKEY for about 13 years and this was the third time I had to replace it.
View detail
Fits: HONDA Shirley 50.
CHALY s Cook was broken.
CHALY I purchased this product because the Cook of Last time I had another CHALY I purchased this product in the first place and had no problems at all, so I purchased it again. View detail
In the Chinese VM Setting
[How is it used?
For some reason, Throw of Chinese VMcarburetor has this Type, so I used this one for setting.
Was the one you received as per Image?
The Sponge dividers were quite nice compared to the usual divider-only Packages.
It is good because Jet does not mess up inside.
Was the installation difficult?
Accuracy is adequate. There were no problems.
How was your experience with it?
Smallest SizeQuantity for SmallEngine Displacement Volume:I thought that with Set, I could Cover all of the Setting range.
It is said that OEMs are more accurate and better for jets, but if the mother company is a Chinese carburetor, I don't think it will be a problem.
[Was there anything that disappointed you?
None in particular
View detail
Pipe Handlebar/Clamp, but as a Fog Lamp/Clamp.
I was looking for a clamp for the Fog Lamp, and since the Pipe diameter is 22mm and it is an M10 Bolt, I thought it might work, so I did some research and found that it might work, so I purchased it.
I wanted to hang it straight down from Clamp, so I was satisfied.
Of course, Bolt and Nut are purchased according to their length at the time of installation.
View detail
Good clean Seat.
The product arrived and I installed it right away. However, the Seat lock
I was troubled because I could not
The solution is to put a Bracket under the Seat lock, and make the height 0.5mm.
Seat lock is now applied when raised.
I liked the Large change because it looks good and is comfortable.
View detail
Perfectly designed
[How is it used?
Purchased for MONKEYZ50J.
I wanted to install a MikuniVM22carburetor, but it interfered with the Tank, so I bought an Intac Manifold Variable Attachment. I thought it would be a good idea to buy a Minimoto product for the time being.
Was the one you received as per Image?
I thought it was as shown in the Image and well made, so I thought it was worth the price. One thing I did not expect was that the variable attachments were thicker than I expected.
Was the installation difficult?
Installation is simple:simply mount it with the depressed side toward the front of the vehicle and fasten it with the included dish Screw.
However, the included countersunk screw was too long and could not be tightened, perhaps because it was a 4LMONKEY, so I bought a shorter countersunk screw separately and installed it.
How was your experience with it?
It has been working fine with no leaks.
The carburetor in question, however, I managed to install it.
However, the thickness of the variable attachment is quite thick, so I tried various angles, but it was too high and interfered with the tank, so I could only use it in a certain direction.
Even in that direction, there is some interference with the tank when the chalk is raised, probably due to the structure of the carburetor. At any rate, I am glad I bought this Attachment because without it, I would not have been able to install the carburetor.
[Included Parts:were they on?
Attachment that matches the inside diameter of the Gasket and intake manifold?
[Was there anything that disappointed you?
The thickness is still Neck. It is well made, but it would have been 5 stars if it were thinner.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Measures to prevent hard to enter Neutral of Grom.
The Neutral on the Grom does not fit well, so I installed it to try it out.
I also exchanged the shift link at the same time, and what used to feel like a clunk every time I changed the shift, now goes in with a snap.
If we wanted, it would be better if the seals of the bearings were made of rubber seal (6902LLU) instead of gold (6902ZZ) to prevent rainwater intrusion.
I will use it for a while longer, and if the bearing is still stuck, I will replace only the bearing with one made by Rubber Seal.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
Fuel Cock M14
It is a product with good quality and texture information There is no difference in the feeling of use from the std products It's easy to install Cost performance and comparison with other products are cheaper than std products WeBike packaging is always great, arriving in a week for delivery and packaging Purchasing concerns, precautions, or advice The rubber packing may be damaged if tightened at too high torque. It should be tightened to meet specifications View detail
Diversion to GORILLA's Custom
Purchased for repair of GORILLA, same shape as OEM Product, made of plastic, but the plating is in good condition and the price is reasonable. View detail
Handlebar Up Type changed to long wire
The product is for MONKEY, but it can be used with Super Cub custom Handlebar Up TypeSpec. and it is good to replace it with stainless mesh. View detail
Used for PWK28.
Used for Chinese PWK.
It's a Jet, so there's nothing to write home about it, but it's cheap but made with precision.
I can use KEIHIN-compliant Jet for Chinese PWKs, which is very useful.
I think it is a necessity at the time of Setting.
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
Sprocket
Sprocket, one of Motorcycle's smallest cogs. View detail
Fits: HONDA CD50, HONDA SUPER CUB 50, HONDA LITTLE CUB50, HONDA CL50, HONDA BENLY50S
Together with Engine Displacement VolumeUp
The cylinder was changed to a 50mm bore, the crank was changed to a 52mm stroke, and the engine displacement volume was increased to 102cc, so even in 4th gear, the engine would blow up in no time and was not busy. However, when the Driven Sprocket was set to 17T and the Driven Sprocket to 30, the car now has a mild acceleration that makes full use of the Torque and allows the driver to easily go with the flow even on main roads. View detail
Fits: HONDA MONKEY, HONDA GORILLA
CoilBracket
for MONKEYCoilBracket when using Uotani View detail
GORILLA2V Change
Purchased 6VGORILLA for 12V changeover.
It was easier to do than collecting in Rose.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund
Good cosmetics!
[How is it used?
We decided to purchase the carburetor to replace the carburetor along with the Bore up.
Was the one you received as per Image?
Quality was not bad and comparable to domestic carburetors.
Was the installation difficult?
Without a swivel Adapteretc., the large body will interfere with the Engine.
How was your experience with it?
It also runs in the Setting there.
Main should be around 100, and Throw may need to be raised a little from NORMAL 15.
It is definitely easier to Set up than TM24.
[Included Parts:were they on?
Nothing else in particular.
[Was there anything that disappointed you?
I was disappointed that the Jets were Minor and could not be diverted.
▼Recommendation is made because it is inexpensive and has a large diameter compared to PC20.
View detail
Emblem
Installation is not possible without relocating OEMHorn.
So we need to work from the relocation of Horn first.
Bracket is included in the Mounting Kit and can be easily installed using the OEM bolt.
View detail
Mounted on a return-type GORILLA
I did not want to damage my shoes when changing gears, so I attached them to the return-type GORILLA.
I feel some awkwardness in the foot placement of gear changing and footpeg, but I have no problem at all with this Change Pedal.
Thanks to you, Shoes is satisfied with the quality of the product without any damage.
View detail
Fits: HONDA LITTLE CUB, HONDA GIORCUB, HONDA LITTLE CUB
Cospa is good
Used for LITTLE CUB.
Compared to before installation, there is a slight pulling feeling in 4th gear.
If not combined with other Parts, there is no extreme realization in the NORMAL state.
Installation is easy, but beginners should check from the CDI position.
Wiring is short? Perhaps because the wiring is short, there is a slight sense of forcing when installing.
The instruction manual is included for your peace of mind.
Satisfied with the cosmetics.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
tl50 isn't in the fit, but it's perfect!
I thought, "tl50 is not compatible, but it's a Honda, so if the screw diameter is right, it will fit! I half gambled and bought it!
The diameter of the Fuel Cock section of the tl50 is 14mm.
This is the same APE Tank I used to tinker with, so I knew it would probably get there!
If you measure the screw diameter with Caliper, I bet you can use it for the most part.
Motorcycles over 40 years old are amazing! The packing of the Fuel Cock is so chica like plastic and not even half of it is left!
Good thing Packing was planning to change everything.
I'm afraid of Gasoline leakage if I run like this.
It can't be!
Comparison with OEM
OEM is easy to understand because On, Off, and Reserve are written in letters.
I know this item, Off, because only one notation (circled) is different!
But On, is Reserve a pictorial notation? Pictographs?
I don't know what to look for in such a Д゚ Mark…
You have to remember intuitively where the cook twists!
The plastic tube like a filter is attached to the top of the Fuel Cock. However, when I installed it on my tl50, it would not fit in the tank with this Filter attached, so I had to pull the Filter out and leave the tube inside!
View detail