Reviews
Can be installed on MT-10 2022MODEL
It is not in the fit, but I bought it because the Frame, etc. should be the same.
Left SideBolt in NORMAL : M12x40 P1.25 Flange cap bolt, installed without collar.
NORMAL Right SideBolt : M12x42 P1.25 Put three color points on it and get it out. 15.
Balter's attached Left SideBolt : M12x100 Protector, collar on and out. 40
Balter's attached Right SideBolt:M12x80 as well. 20
Therefore, the effective length of Bolt is 5mm longer than Baltar's, and since it does not butt up against it, there is no problem, so we installed it.
Installation is by tightening Torque 70 Nm. It is recommended to use a torque wrench since it is an important part.
Also, the NORMAL bolt is quite hard to remove, so it is better to prepare a long Spinner Handlebar or the like.
View detail
Race ish feeling Up.
Since I use my ZX-6R (2012) only for circuit driving, I don't need a Tandem Footpeg, so I installed this Exhaust System Hanger. When I bought the Hanger, there was a Valter Moto Emblem between the square holes of the Hanger, and without the Tandem Footpeg, the Hanger looks Race ish and Refreshing. It fits perfectly with YOSHIMURA's Exhaust System and has good accuracy.
Also, as far as I know, it is a violation to remove the Tandem Footpeg without permission. I had to go through the vehicle inspection first. Structural Change and the vehicle has been inspected. Those who drive on public roads, please be careful just in case.
View detail
Good appearance and texture.
It is installed on a ZX-6R (2012) used only for circuit driving. The screw hole position is accurate and easy to install. It looks beautiful and is a large size. View detail
One point of unexpected prominence.
Tank Bolt is a part that does not need to be changed, but when purchased as Bonsai Parts.
Since the front fork is also gold, we chose gold to match the color.
I was worried about whether the color of the anodized finish would match the gold of the front fork, but it looked good.
When installing, or rather replacing Bolts, I had to remove one Bolt at a time and replace it while checking the length because each Bolt is RoseRose (the three Bolts are the same).
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FZ1FAZER, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
Fashionable Design
The design is not just a hexagon but a spiral. The design is not only hexagonal but also spiral. View detail
Fits: KAWASAKI Z750 (water-cooled), KAWASAKI Z1000 (water-cooled)
It's expensive.
It is quite expensive, but the precision of the machining of the parts is high and the feel of the brake and shift pedal is much better than the NORMAL.
I was able to install the position in a place where it is easy to control and not get tired when driving on the street. I am not dissatisfied with the feeling of use because there are color variations of anodized treatment and I can get a sense of satisfaction that I did custom visually by replacing it.
View detail
Fits: DUCATI MONSTER S2R, DUCATI MONSTER S4R, KAWASAKI Z1000 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z800, KAWASAKI ZX-6R, KAWASAKI ZZR1400 (ZX-14), KAWASAKI Z900 (2017-), KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA1000 (Z1000SX)
VMC bow guard
My car is a Z900 2021 model of Damao Kawasaki. I bought a VMC Evo carer on Webike. The material of this product is aluminum alloy. This carer has a variety of colors, and the material is very good. You get what you pay for. It can effectively protect your hands during normal riding, or you can hang it here when you ride out to buy things. I will also recommend Wibaike platform to other friends, hoping that Wibaike products will be more and more, and the price will be more and more favorable. ---------------------------------------------- My car is Z900 2021 Jeep Grand trade Kawasaki, I bought the VMC's Evo care workers in Webike. This product is made of aluminum alloy. The carer various colors, materials and workmanship is very good, a sub-price goods in the ordinary course of riding can also be effective to protect your hands, or ride out to buy things can hang in this, too. I will recommend Viagra 100 passengers platform with other Friends of Mount hope Granville 100 passengers more and more goods, more and more price concessions. Powered by Google Translator View detail
It was purchased for dress-up purposes.
There is no maintenance stand and I have never used it.
I've taken the feeling of use to 3, because I can't judge ….
I bought it because I don't like that there is no screw hole on the Swing Arm.
Installation is very easy, just screw it up.
Parenthesis has become a little better than just a hole in the ground, hasn't it?
View detail
Is good!
I installed it on Black of GSX-R1000 K8. I attempted to install around Cowl, but did not fit in the Bolt hole stopping Cowl and used it for Bolt of Front fender. Bolt is a feeling that it seems to be transformed at once.. For reference, there are For M6 and For M8, but the Spacer itself is the same in Large size. The diameter of the hole through which Bolt passes is somewhat different from Design. Poshetc. I will double the price of Spacer, but I think that Design is worth considering. The delivery date was 5 days. Fast View detail
It's pretty good
I purchased it because the installation position of the exhaust system of FZ 8 and FZ 1 was the same.
My motorcycle has been replaced with a Slip-on Silencer for the Exhaust System, but it is similar to the OEMExhaust System, so it could be installed in the FZ 1.
Passenger peg has been removed, but the opportunity to Tandem is almost Zero so we only have to return it at the time of vehicle inspection.
I'm Steel, so I'm worried about Rust.
I wish I could have been made of Aluminum if possible ...
Exhaust System It is good to have fixed Bolt and Color.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-S1000, YAMAHA YZF-R6, YAMAHA YZF-R6
It's pretty good
I attached Titanium nut, but I tried to buy it because the character was etched and Parenthesis was good.
Because the Stem shaft is visible because of Open end, I am requesting Hole Plug with One-off.
Strongly, Titanium has a sense of security, but it is a little worried about Aluminum.
In addition, I need a 36 mm Socket but I did not have a hand, so I went to the tool shop to buy it (I do not know how many times I will use it in the future ... f (^ _ ^;
View detail
OEM's footpeg was enough
Although I was interested in Rear Sets, I hesitated because I heard that footpeg will receive Damage until Frame when falling down when footpeg comes to the bottom of the lake.
Since 10R likes the shape of footpeg, I gave Footpeg Up Plate and it felt a bit behind.
Installation on Frame was easy, but when installing Normal stepAssy on Brake side, Brake hoseetc. It was an obstacle to install due to interference.
I got a footpeg and I got scratches in Frame.
I think that the impression after riding after installation became easier to apply load.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA FZ6-N, YAMAHA FZ6-S Feather, YAMAHA XJ6, YAMAHA XJ6 Diversion, YAMAHA FZ8, YAMAHA Feather 8, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA MT-07, YAMAHA MT-09, YAMAHA TDM900
At One Point
Just by making it Gold, I can shoot around Cap more than I thought. MT-09 is FrontCB 400T Gold, so Point - I put Gold in the Point. Taka is Bolt, but it is quite cool.. View detail
Fits: APRILIA Tuono V4 R APRC, KAWASAKI ZX-6R, TRIUMPH SPEED TRIPLE R, TRIUMPH SPEED TRIPLE, HONDA CBR600F, HONDA CBR600RR, HONDA Hornet 600, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, APRILIA RSV4, APRILIA RSV4 R APRC ABS, HONDA CB1000R (-2017), HONDA CBR1000RR
Although the Fork Adjuster by a British certain Manufacturer was attached, since the Design was not quite satisfactory, here where it was found with the Motorcycle magazine was purchased.attachment is also easy and a Design is also a cinch.It is an Ac
Although the Fork Adjuster by a British certain Manufacturer was attached, since the Design was not quite satisfactory, here where it was found with the Motorcycle magazine was purchased.
attachment is also easy and a Design is also a cinch.It is an Accent although it is the parts with which it hardly tampers usually [
].
View detail