Reviews
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S
I think it is effective
I felt uneasy with the attached Double-sided Tape so I added about 2 columns and installed it.
I think that the jump of the puddle has been alleviated.
Color : Because it is Unpainted and a simple shape it may be nice if it is a bit cheaper.
View detail
Fits: HONDA 400X, HONDA CB500X, HONDA CB400F, HONDA CB500F, HONDA CBR400R, HONDA CBR500R
It is quite effective
Too much expulsion to Exhaust pipe and Radiator is amazing, so the price was a little expensive but I installed it.
Jumping up was better than I thought, and I did not go to Radiator.
I dared to drill Double-sided Tape and drill it firmly in the attached Pin of Pura.
Clearance with Tire was a little worried, but for now it is no problem.
If it is a bit cheaper, the evaluation will also rise - - - !?
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S
Maybe there is effect
It was attached to NC 700X, but this time it was installed in 750S. Attached with the attached double-sided tape and drilled in three places of the OEM Fender and bound with the attached resin Pin was made according to the Manufacturer designation, when it was 700 ×, it was as it was, but because this time it is troublesome to drill, Cemedine SUPERX I glue it with. There is nothing wrong with fixing.
Since I installed it at the same time as purchasing a new car, I can not compare the effects because I can not say anything, but NC's OEM Front Fender is very short, so I think there is an effect. Delivery The car was running for 500 km continuously on an expressway on an early rain, but Under Cowl was dirty, but the upper part of Cylinder head and Radiator did not get dirty.
View detail
Fits: YAMAHA Tracer 900 GT, YAMAHA MT-09 Tracer, YAMAHA MT-09 SP, YAMAHA MT-09
Is good!
With this and nothing, the degree of water stain to Engine, Radiator changes dramatically.
The appearance is extended Length and Color, because the texture is consistent, it is delicate ...
It is the best performance.
I used it with MT - 09 but it was useful as it was lost to the Radiator.
View detail
Extension of mudguard @ GROM
【What made you decide the purchase?】 Because I got cheaper than usual in Campaign.
【How was it actually used?】 Sufficient, functioned as mudguard.
【Was it difficult to install? (Hard parts case)】 I can not use the included Double-sided Tape, attached my own ButylTape and attached it.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Clean the adhesive surface.
[Is there anything I was disappointed about?] A little making is sweet
【Hope for Manufacturer - Please tell me if there are any improvement points】 None
【Have you compared items?】 Required
[Others] Any
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S
I received it immediately after placing an order
Second order, second worked and Rear Fender batched
Hidden in Side Back and finish of ordinary feeling
Because it is an invisible place, it stops even with Small Tapping Tapping screw and it has fall prevention
View detail
I think that it is very good..
Is it possible to put in the attached dealer?. When installing Screw in Wire's Wire is difficult to match with Body so if you do it with Length 5 cm of the attached Screw, Screw 's Length matched to the victory is not visible because it is inside Body It is durable even if it is longer than Large. View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S
Very good
ExactlyFit Installation was easy.
Just by increasing the Double-sided Tape, I floated the floating part so that the splashed muddy water did not hang on the table with Coking.
Anyway it's easy
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S
Need for self-processing
The shape was Exactly to the OEM Front Fender, but the texture of the material and color of the commodity did not match the price very much.
Daiso's Material : Carbon Style Imtechan at the inte Rear seat, Double - sided Tape also dropped Body 's grease and replaced it with 3 M Strong Double - sided Tape.
Evaluation of Cost performance will definitely be one star.
View detail
Fits: YAMAHA Tracer 900 GT, YAMAHA MT-09 Tracer, YAMAHA MT-09 SP, YAMAHA MT-09
I think that it was good to install
Since attachment is not solely with the included Double-sided Tape, we attached a double-sided tape separately and attached Pin attached.
Drilling is necessary to install Pin, but it is troublesome to measure curved objects.
I also have holes in Fender, so it will be ugly if I do it.
There is no problem with quality and texture, but it is awkward for price.
The shape is perfect for Fender of Racer. Since colors are almost the same, there is no discomfort.
I think that the price is high for the thing, but when thinking of the clogging of the Radiator, the belly can not be changed on the back.
Although it is currently in use, as soon as it gets installed it will not rain so I do not know the effect in rainy weather, but I think that winding up to the Radiator such as Small stone and sand has been relaxed considerably.
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S
It is as good as your rating
It is a little expensive and can only be taken out of Seal, so we need ingenuity to install. I installed your review as reference. It's only durability after. View detail
Quality is too low for price
Quantity : Pair (for Left and Right) It was disappointing in terms of quality, such as the different Length of the edge. Is it a defective item?
It's easy to install because it is stuck with Double-sided Tape, but I added it myself because I am anxious only with the attached Double-sided Tape. Screwetc. It does not come.
In the case of BOLT Shoulder Bag, since the Fender is about 12 Length extended, I think that the effect of preventing mud bouncing is high, but at first glance Quantity : Pair (for Left and Right) I am concerned that the Length of the edge is different, and I will make it a low evaluation.
View detail
Dirt has decreased
In the OEM Shape, water is added to Oil cooler (Muddy) I got it because the sand stain is outstanding.
I installed P & A Fender and I ran on a wet road, but much water (Muddy) It seems that it was resolved. After traveling Oil cooler shows clearly few traces of splash. If Fender gets a little longer shape it will be more effective, but thinking of the overall Balance is Limit.
I did the installation myself. Although Double - sided Tape had already been affixed to three places, in the manual there was a statement recommending the use of attached Screw so we stopped Screw without hesitation. Reliable feeling is different.
Screw attached 4, resistant to opening a lot of holes, opened by three individual holes at the discretion of the double-sided Tape and Screw installed in combination. I ran a few hundred kilometers, but it seems that there are no problems in three places. Work was not taken so much as it was only removing and attaching Fender, drilling with Drill and installation.
The reason why Cost performance is low is that the price is too high "☆ 3" I succeeded.
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S
There seems to be little mud to Radiator.
I removed the Front fender, opened the hole and installed it.
It will be absolutely out of with Double-sided Tape alone.
I can do it myself but somehow I got it to Motorcycle shop.
Thinking of labor costs you can do it by yourself while you can do it by yourself.
I think that it is effective because there is little mud to the Radiator.
If it is painted in the same color as Fender it may not be noticeable.
View detail
Function, shape, passed together
I was reviewing the Radiator core guard, but first purchased without mud and stone splash.
From the conclusion the effect is absolutely Large! It will rain, even with some puddles the Radiator will not get dirty.
I am Double-sided Tape reinforced, but there is no blur, dropout.
Somewhat, there is a gap in close contact with Fender, is it a problem of pasting,
The shape does not feel uncomfortable, as time goes by, the feeling that it was attached from the beginning.
For a while the purchase of Core guard is gone.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA XSR900, YAMAHA MT-09 Tracer
Adhesion between Fender is Large
Since I wore a Fender Eliminator, I bought the same product with muddy springs in Normal fender.
As shown in the picture, Fender is glued together (Enclosed item) In order to do so, ClampLarge 4, small 2 is necessary so we recommend that you prepare in advance.
It takes a bit of effort, but it will be extended by 10 cm. Cost was suppressed rather than changing every Fender.
View detail
Future expectation
Purchase to prevent contamination of Exhaust pipe part. It is something to worry about because Fender and Tire 's Clearance is narrowed because it is set inside Fender. Machining was done by Motorcycle shop and we had a hole drilling done. Because there is some gap in the overlapping part of Fender, we do not recommend it for those who want precision.
I am satisfied so much if I think about the Universal Product level.
View detail
Water countermeasures
As it is NORMAL, there are quite a few of the water splashes, so I bought it as a countermeasure.
Kit was attached with Puri Rivet and Double-sided Tape, but it is fixed with Epoxy adhesive and Aluminum Rivets because it is prevented from dropping out.
The water splash that had been flying to near the Top Bridge was considerably reduced.
View detail
Bounce-up reduction.
Front fender is short for running or Small stone etc.. Bounced up and hit the front Frame and Engine bottom, so it got dirty as it passed through a puddle or a wet road surface so I attached it.
I attempted to remove and paste the Fender, but in the case of BOLT Shoulder Bag I had to paste Tire as well because I felt troublesome that I could not get a Fender, so I attached it. In the original Double-sided Tape, the adhesive strength was weak and it floated soon so it was pasted with Soft Type Bond. For now it's fixed firmly.
In my case I also Ring Sea at Bond just in case of junction with Fender. A little finish got dirty (-_-;)
Overstatement price is too high. I think that it is a reasonable product at about 2000 yen.
View detail
Fits: HONDA Integra, HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750X
It may be imitated.
Purchase whether it can mitigate mud bounces from Rear tire.
Installation is the basic Double-sided Tape, but since I am not concerned, I stopped Screw together.
The appearance of Rear Fender becomes long and it protrudes somewhat behind.
It is a key performance, but I feel that I have not demonstrated my ability as I thought.
I feel that NORMAL condition is sufficient.
View detail