Reviews
Good!
As expected of KOKEN.
I am satisfied with the texture of the Anodized that I requested . (^o^) /
Since it is anodized, we can only request aluminum products, but we asked Pinpoint to anodize the parts and bolts that we wanted to add color to.
The color I requested is Pink.
There are many Anodized products in the world, such as Blue, Red, Gold, etc., but there are almost no products in Pink color. (Polish)
But thanks to this, we were able to create a nice dress-up look that was not similar to other people's.♪
View detail
Black and Silver&Pink were made Purple.
[How is it used?
Brake&Clutch lever
Universal Bracket, etc.
Was the one you received as per Image?
The product was exactly as shown in the Image.
Was the installation difficult?
How was your experience with it?
It is very beautiful and I like it.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
No gain.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Required Size for Koken Hose
I bought a battered 900SS (900SL) and am Restore.
DUCATI has adopted OEM brembo Master Cylinder and Caliper, but DUCATI of this era has Parenthesis bad Square Type Reserver tank integrated Master Cylinder, so it is often replaced with Reserver tank separate type. However, DUCATI of this era has often replaced the Master Cylinder with a separate Reserver tank.
After 30 years, such brembos are already in shambles, and if they are stored outdoors with no maintenance, they must be in pretty bad shape.
Hose connecting Reserver tank and Master Cylinder, but it is basically Rubber.
If you use a cloth-wrapped hose made by bremboOEM, it is still fine, but if it is not a cloth-wrapped hose made by another brand product, the surface should be white with pushing.
If a translucent Oil Resistant Hose were used, it would be so stiff that it would be impossible to pull it out.
So, I bought a cloth-wrapped Hose kit from Koken to replace it, but the problem is that this Hose kit does not have a Hose clip in quantity.:2pc. Only Set should be included.
No, normally it should be Large sturdy with it, Cut to the required length and fixed, but the rest of the Cut should be too short to be useful.
However, if it is cut well and used in two places, there will not be enough Clip.
Here is a Clip set for such occasions.
You don't have to use such an expensive Clip, you think UniversalClip is fine, right?
However, this is not the case. When bremboOEMTank and KOKEN Hose are combined, this Clip must be used to achieve the best tightening.
To reproduce the same tightness, you should definitely use the screw type.
Since it is a plain steel clip with a black coated surface, it is rather easy to rust it, so if you are concerned about its appearance, it is a good idea to replace it periodically.
View detail
KOHKEN Alma Box 20
This was my first time using them because I had heard good things about them on the Net. I was told it would be returned in a week, which was true. I was told it would take a week to get back to me, but it was true. In the case of used parts, how clean the surface is affects the finish, so we polished it as much as possible and shipped it. The finish was of sufficient quality. This time, we ordered matte black and the finish was as expected. We installed the parts immediately and were very pleased with the results. I will use them again next time I want to have my car anodized. View detail
To prevent corrosion of homemade Bracket
Only the Offset collar of Caliper was noticeable in Black with Luster, so I re-anodized it in Matte Black with KOKEN Alpack10.
Since up to 10 items can be processed in the same color, we also included a self-made switch bracket made of aluminum plate.
Please note that when sending to Kohken, it takes at least 3 business days for delivery and about a week after arrival because of regular mail.
I was told that the stamps on the envelopes were too much because the items were lightweight this time, but I didn't want to peel them off, so I sent them out as they were.
When I checked the returned items from the Anodized Treatment, the Offset collar was not as matte Black as I had Image, but this is a Material surface issue, so it can't be helped.
And to my surprise, I was very pleased with the homemade Switch Bracket I made from an aluminum plate, which turned out to be exactly the matte black that I had Image.
Aluminum base? If it is an aluminum base, the color may be very beautiful.
I would like to use this service again next time I need Anodized Treatment.
View detail
Very good Size
[How is it used?
Touring, city driving
Was the one you received as per Image?
Street Image
Was the installation difficult?
It was easy.
How was your experience with it?
It was good
[Included Parts:were they on?
It's not attached.
[Was there anything that disappointed you?
Easy to rust
View detail
It improves the appearance of theHose.
Not only the appearance but also the deterioration of the fluid can be visually observed, which improves maintainability. View detail
Brake fluid leak stopped.
Used to fix hose between Brembo master and bremboTank.
Previously fixed with Tie Wrap, but Fluid leakage occurred.
I fixed it with this Clamp and the leakage stopped.
View detail
Good Quality & Packaging
The quality of the item is good without any scratches. The item was packed properly even a small piece. So far the item is good as expected. View detail
Rear also exchange!
brembo : I replaced the RearBrake Caliper 34 84 mm BridgeBolt. Like the Front, the Bolt shape is a Taper so Custom feeling will rise! Screw Length is Front - Rear is 40 mm for both. As with Front, there is a risk of insufficient strength than OEMBridgeBolt and it is dangerous - - - After replacement Circuit, pass etc. etc. I never use Brake on Hard, so I think I'm safe to ride on a regular basis and I'm durable. If you encounter problems after BridgeBolt exchange, I will borrow this place and report it to everyone! - - - It became the same use as Front Parenthesis It got better! View detail
I have various opinions - - -
Brembo : Brake caliper 30 / 34 I replaced the 40 mm bridge bolt. Since the bolt shape is tapered, custom feeling will rise! The screw length is purchased 4 pieces of 40 mm. Since it is 1 set 2 pieces, 2 sets are necessary! At this time, I want to check the screw length before purchase at the net "Brembo casting bridge bolt exchange" A lot of information came out other than the screw length when searching with. In the search, when replacing the bridge bolt with the stainless steel bolt, it became stronger against rust, but it was dangerous because the strength was lacking than the genuine bridge bolt! - - - In the retrieval information, Brembo casting replaced the stainless steel bridge bolt and it was damaged! There was none of the articles came out! Also, after exchanging, I did not use the brake hard on the circuit and pass etc., 125 cc It is installed in Grom, so I thought it would be fine even if I was relieved. If an accident occurred after replacing the bridge bolt earlier due to a dangerous thing, I think that it is not selling. After exchanging the caliper and bridge bolt, I use it without feeling anything uncomfortable, and the effectiveness of the brake is best than genuine. Be careful not to scrape with a panic brake! View detail
Stainless Steel to prevent rust
Stainless Steel, but Screw's head is polished and beautiful.
Just by exchanging with Screw attached to Body but using Torx wrench it is better to stabilize the car body so as not to hurt Bolt.
View detail
It looks much better
I bought bremboCasting caliper and ordered to replace it from ironic Bolt when I purchased it. It was completely renewed and it got much better. View detail
The Bolt of the Caliper was changed into the Taper cap bolt.Although it thought that the Caliper would be exchanged, since it was satisfactory for the present engine performance, as it thought what it would do, it imitated by remembering the Taper specifi
The Bolt of the Caliper was changed into the Taper cap bolt.Although it thought that the Caliper would be exchanged, since it was satisfactory for the present engine performance, as it thought what it would do, it imitated by remembering the Taper specification of a brembo by use about a Touring.It was felt refreshed in Design, became beautiful, and is very much satisfied.Although I felt that the price of the Bolts was somewhat high (eight is used by right and left), it is a STAINLESS-STEEL raw material and the satisfaction of the grade which can bind tight with sufficient Torque and it does not worry about a Cost from UP of Design nature satisfactorily for the engine performance (rigidity) was acquired.Although it was a half-Screw (Screw is turned off to half of Bolt) Type, since it was all the Screw (Screw is turned off to the head of Bolt) Types, the goods which placed an order and arrived were a little surprised at Mr. Webike's goods photograph from having wanted the half-Screw type and having purchased at the last.If it binds tight to the Caliper, since it was satisfactory, the buyer needs to recognize that a printing photograph differs from thing by there being no being efficient difference. View detail