Reviews
Black and Silver&Pink were made Purple.
[How is it used?
Brake&Clutch lever
Universal Bracket, etc.
Was the one you received as per Image?
The product was exactly as shown in the Image.
Was the installation difficult?
How was your experience with it?
It is very beautiful and I like it.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
No gain.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
bremboRCSMASTER Full Custom
Black body overall running Red color insert.
All Red Option parts that come with bremboRCSMASTER are now installed! 。 At this time, we also replaced the Titanium-colored LeverPin, and were pleased with the new look.
The construction of each bar is perfect, and there are no concerns or complaints at all about the operability or rigidity.
View detail
Required Size for Koken Hose
I bought a battered 900SS (900SL) and am Restore.
DUCATI has adopted OEM brembo Master Cylinder and Caliper, but DUCATI of this era has Parenthesis bad Square Type Reserver tank integrated Master Cylinder, so it is often replaced with Reserver tank separate type. However, DUCATI of this era has often replaced the Master Cylinder with a separate Reserver tank.
After 30 years, such brembos are already in shambles, and if they are stored outdoors with no maintenance, they must be in pretty bad shape.
Hose connecting Reserver tank and Master Cylinder, but it is basically Rubber.
If you use a cloth-wrapped hose made by bremboOEM, it is still fine, but if it is not a cloth-wrapped hose made by another brand product, the surface should be white with pushing.
If a translucent Oil Resistant Hose were used, it would be so stiff that it would be impossible to pull it out.
So, I bought a cloth-wrapped Hose kit from Koken to replace it, but the problem is that this Hose kit does not have a Hose clip in quantity.:2pc. Only Set should be included.
No, normally it should be Large sturdy with it, Cut to the required length and fixed, but the rest of the Cut should be too short to be useful.
However, if it is cut well and used in two places, there will not be enough Clip.
Here is a Clip set for such occasions.
You don't have to use such an expensive Clip, you think UniversalClip is fine, right?
However, this is not the case. When bremboOEMTank and KOKEN Hose are combined, this Clip must be used to achieve the best tightening.
To reproduce the same tightness, you should definitely use the screw type.
Since it is a plain steel clip with a black coated surface, it is rather easy to rust it, so if you are concerned about its appearance, it is a good idea to replace it periodically.
View detail
KOHKEN Alma Box 20
This was my first time using them because I had heard good things about them on the Net. I was told it would be returned in a week, which was true. I was told it would take a week to get back to me, but it was true. In the case of used parts, how clean the surface is affects the finish, so we polished it as much as possible and shipped it. The finish was of sufficient quality. This time, we ordered matte black and the finish was as expected. We installed the parts immediately and were very pleased with the results. I will use them again next time I want to have my car anodized. View detail
To prevent corrosion of homemade Bracket
Only the Offset collar of Caliper was noticeable in Black with Luster, so I re-anodized it in Matte Black with KOKEN Alpack10.
Since up to 10 items can be processed in the same color, we also included a self-made switch bracket made of aluminum plate.
Please note that when sending to Kohken, it takes at least 3 business days for delivery and about a week after arrival because of regular mail.
I was told that the stamps on the envelopes were too much because the items were lightweight this time, but I didn't want to peel them off, so I sent them out as they were.
When I checked the returned items from the Anodized Treatment, the Offset collar was not as matte Black as I had Image, but this is a Material surface issue, so it can't be helped.
And to my surprise, I was very pleased with the homemade Switch Bracket I made from an aluminum plate, which turned out to be exactly the matte black that I had Image.
Aluminum base? If it is an aluminum base, the color may be very beautiful.
I would like to use this service again next time I need Anodized Treatment.
View detail
Very good Size
[How is it used?
Touring, city driving
Was the one you received as per Image?
Street Image
Was the installation difficult?
It was easy.
How was your experience with it?
It was good
[Included Parts:were they on?
It's not attached.
[Was there anything that disappointed you?
Easy to rust
View detail
Fits: Others
Replace Pivot pin on Short Stroke
I have no problem with bremboOEM Pivot pin, but I replaced it with BlackXCoat Pivot pin made by Koken to match Bleeder Bolt.
Installation was not a particularly difficult task since all we had to do was remove and replace the OEM pin.
Compared to OEMPin, the quality of the finish is very good and Material:Since it is Breck XCoated with Stainless Steel, I expect that it should be rust resistant, as we don't do much maintenance such as washing the car.
As for the weight, I forgot the Scale, but since it is the same iron-based material, it probably won't be any different.
View detail
It improves the appearance of theHose.
Not only the appearance but also the deterioration of the fluid can be visually observed, which improves maintainability. View detail
Lever
Replaced with Middle type.
It is about 15mm shorter than the RCS standard lever, which is just right.
Both Brake and Clutch were replaced.
View detail
Used for VTR1000SP
The Brake Side is the same as the Brake Side, so I matched it to the Brake Side. View detail
COOKING - Short TypeLiver
We treated our beloved Motorcycle to a brembo Corsa CortaMASTER and installed it.
OEM was not a good shape for Lever and it was Long, so I wondered if there was a Short Type. I looked for a short type. There was one. It was made by KOKEN. I had purchased other products from KOKEN, so I knew the quality of their products.
I have large hands and a strong grip, so the Short Type Lever is sufficient for me. The feel is very good, and my index finger does not get pinched (operated with middle and ring fingers). No complaints.
View detail
This is for CORSA Corta only. It is a RECOMMENDATION for those who prefer square levers.
The CORSA Corta has a thin lever and I did not like the feeling of it digging into the belly of my fingers when I gripped it.
The brembo racing master I used to use had a better feel with a more angular lever, so I tried to transplant just the lever, but it was impossible because of the different shape.
I was looking for a good Other Brand Product and this one caught my eye. I have large hands, so I chose the Standard size.
I tried to remove the OEM lever, but it was licked in an instant because Torque screws were used and were solidly tightened.
I couldn't back out any longer, so I flew the Screw head with a Drill and forcibly removed it.
I felt brembo's strong will that "don't remove it. I felt brembo's strong will to make the product.
We procured a replacement Screw at Home center. In addition, we also prepared a Nut.
I replaced the Lever and tightened the Screw, but the Lever moves a little.
The thickness seems to be slightly different from OEMLever, and it might have been better to put a Shim or something in between.
I forcibly tightened the Screw and fixed it with Nut.
I'm in a big commotion just by changing the lever.
The feel after the replacement is good. The square cross section seems to suit me better.
Recommendation for those who are uncomfortable with thin levers.
View detail
Fits: Others
This is for CORSA Corta only.
When I removed the Pivot pin from the CORSA Corta, I discovered that the Black color was peeling off.
The Racing master I used to use also had rusted PivotPin, so Steel is no good.
The rumor that brembo's quality is declining these days may be true if it deteriorates after less than six months of use.
This product is available from Koken, and it would be better to replace it if you want to use it for a long time.
Material:Stainless Steel with Titaniumium coating, so there is virtually no risk of rusting.
For CORSA Corta, this is a Recommendation.
View detail
Brake fluid leak stopped.
Used to fix hose between Brembo master and bremboTank.
Previously fixed with Tie Wrap, but Fluid leakage occurred.
I fixed it with this Clamp and the leakage stopped.
View detail
Good Quality & Packaging
The quality of the item is good without any scratches. The item was packed properly even a small piece. So far the item is good as expected. View detail
Short lever options
Since I replaced the brembo RCS and Koken clutch holder, I also replaced the brake side with this short lever.
1~Quantity:Brakes are originally made in Quantity (2pc).:We use it for 2pc seating and it comes very snugly.
The accuracy is good and it sticks firmly to the Foldable Holder.
The price is a little high, but the good thing about this is that it is shared with Clutch Side.
If you want to keep a spare, you only need 1 pc.
The durability of the Anodized is unknown, but in general I feel it is a good product.
View detail
I installed it on my ZrX1200 DAEG.
I bought the Standard.
It was the perfect Size for my hands.
View detail
Fits: Others
good
Compared to the bremboOEMLever, the R of the finger-hanging point is smaller, so it is easier to use and easier to control.
Aero Type and Design is good.
View detail
Fits: Others
Higher grade feeling
In a way, this one also feels like a side effect of the Light Noble Gold genus dependency syndrome.... It looks luxurious. It is printed with KOHKEN and Laser in small letters so small that I cannot check it with my old eyes. View detail
Fits: HONDA NC700 S 2012-2013, HONDA INTEGRA 2012-2013, HONDA HORNET600 S 1998-2001, HONDA Fire Storm 1997-2003, HONDA CBR900RR 1996-1999, HONDA CBR600F 2011-2013, HONDA CBR600F 1999-2000, HONDA CBR600F 1997-1998, HONDA CB900 HORNET 2001-2003, HONDA CB600F HORNET 2007-2013, HONDA CB600F HORNET 1998-2006, HONDA NC700 SDCT 2012-2013, HONDA NC700 X 2012-2013, HONDA NC700 XDCT 2012-2013, HONDA SHADOW Slasher750 2000-2003, HONDA SHADOW400 1997-1999, HONDA SHADOW750 1997-2003, HONDA XL1000V Varadero 1998-2012, HONDA CBF600 S 2008-2009, HONDA CBF600 NABS 2004-2007
It's cool, but it's still expensive
I don't think there's any way around it since the outside Manufacturer is Anodized, but the thing is I think it's good but expensive
It looks good
It's called Sunstar, DID, and the stuff is good, so we need a setting where you can choose the color of the drivetrain components I wish they had made it, I wish they had made it
View detail