Reviews
Good thickness to withstand STREET use!
I bought a battered 900SS (900SL) and am Restore.
Although battered, the visible exterior is relatively clean, with no cracks, cracks, or discoloration on the screen.
The body is 30 years old and has some minor Abrasion that may have been acquired during the process of use, but no problems that would require replacement.
I was going to use it as is, but ...
When I applied it to the car body under restoration, I found that it was distorted quite drastically.
I thought that the Screen of the Initial Model without Oil Temperature Meter was installed on the body of the Second Type Model with Oil Temperature Meter on the Meter, so the Oil Temperature Meter might have pushed the Screen and deformed it (in fact, the Oil Temperature Meter part was scraped off in contact with the Screen). I thought that the Oil Temperature Meter part might have been deformed by the Oil Temperature Meter (the Oil Temperature Meter part was actually scraped by contact with the Screen), or that the Mirror Bracket was bent and the Cowl was deformed when the vehicle tipped over, and the Screen was distorted by the bent Mirror Bracket. However, it seems that the Screen was distorted by the weight of some luggage that was placed on the Screen during long-term storage.
So, I replaced only Screen to try it out.
Fortunately, the reading was per Large and the distortion disappeared with Screen replacement.
In replacing the oil temperature meter, we should have purchased one for the Second Type Model, which has an Oil Temperature Meter, but this time, we dared to purchase one for the Initial Model, which does not have an Oil Temperature Meter.
The reason is that the Initial Model does not have a raised Screen and has a more beautiful connection with the front curve of the Cowl.
The design of any car model must be an Initial Model that the Designer thought was the coolest!
I think that the beauty of the model when viewed from the side is spoiled by the Second Type ModelDesign with a raised Screen because the Oil Temperature Meter is retrofitted to sell the product and the Screen makes contact with the product as it is.
However, the Oil Temperature Meter in question is violently contacted as it is.
I'm shaving the Meter side of the contact area, but I guess people usually don't like to shave ...
The Second Type Model's raised Shield is also more windproof (the Screen for the Initial Model is much lower), so it is also suitable for normal use.
Since the mounting dimensions are interchangeable, it is recommended to use the Second Type Model with or without the Oil Temperature Meter for touring applications.
However, it is only the Initial Model that is completed in terms of design!
ScreenMaterial performance is unquestionable!
I would have preferred a thinner, more transparent and distortion-free ScreenCraft product, but unfortunately Webike does not carry it.
I gave up on the ScreenCraft product, which is characterized by BALI nko cracking in one shot when it falls over, and went with the more sturdy ACRYPOINT product, but there are no problems at all with transparency or distortion.
It is obviously thick and sturdy, so I don't feel that it will always crack if it falls over like ScreenCraft.
The hole positions did not match, but this must be a problem on the DUCATI side.
Even if it does not fit, it is only about half of the Screw diameter, so a little shaving with a round file will do the trick.
In particular, the 900SS is a spec. that is fixed with a well nut, so it does not matter if the gap is a little low or high.
View detail
Parenthesis is a good idea
I purchased KATANA and this is my first Custom.
Since Screen is small in OEM, the Type of Long is used.
Installed.
I don't know about the aerodynamic effect because I haven't driven at high speeds yet,
I like the new look and feel of Parenthesis very much.
I am happy with this Screen purchase!
View detail
Satisfied with both appearance and effectiveness
By changing to a long screen, the amount of wind received by the body was eased, making high speed cruising easier.
I am satisfied with the appearance, which is better looking than the NORMAL.
I set it to Smoke Screen, but there is no inconvenience of blocking the view, etc.
View detail
Good quality and cosmetics
Higher and more rectified than OEM
High-speed driving is now easier.
ScreenBody and the dedicated PlasticRivet are
It will be attached.
Remove all OEMScreen, screws, etc. for installation,
Simply attach this product by following the reverse procedure.
Only the supplied plastic Rivet is used for fixing. At a glance
It looks unreliable, but in fact it can be firmly fixed.
When assembling this product to the vehicle body, the hole position is slightly gapped.
There were some parts that needed to be repaired, but not to the extent that they require modification.
The work can be completed in 10 minutes.
● Protective Film enters the Rubber Mall at the edge of the
But if you pull off the Film as usual, you can get a good result.
Film can be peeled off without leaving the molding intact.
The instruction manual is not included in the package, so that's a no-no.
View detail
Happy!
I was satisfied with the quality of Visual, as well as the security of JAPAN. View detail
Stable and secure JAPAN!
The only one available for the 2023MODEL, the Smoke Screen, although not an option, is a solid Brand product, so the quality is perfect. The smoothness of the surface, the lack of distortion, the mounting holes, the precision of the chili, it's perfect.
WeBig was out of stock, but we had to wait less than a week for delivery after ordering. That's another great point.
The facial features have been tightened and the impression has changed dramatically.
View detail
It will look cool.
We replaced the poor OEM Screen as the first dress-up when we took the car in for servicing. I am not sure if the wind protection effect was improved, but it looks very cool and I recommend it. View detail
Perfect hole position
[How is it used?
We used this Screen in combination with MC21's Saiya Cowl.
We were worried about OEM used products and TIGERPerformance's Screen, but we chose this product because of its shape and transparency.
Was the one you received as per Image?
It arrives with a protective film attached to prevent small scratches until installation is complete.
It is also quite transparent.
Was the installation difficult?
Installation is easy
The hole positions were perfectly aligned with those of the Saiya Cowl, so there was no need to modify them.
I also used a Nylon rivet from KITACOConvenienceParts because it had an M4 hole and I did not have an OEMRivet. (https://www.webike.net/sd/1343087/)
How was your experience with it?
The shape is a matter of personal preference, but I personally think it is a good length.
The transparency of the ScreenBody makes it look good.
[Included Parts:were they on?
This is the only product, so an M4 Rivet is required if needed.
[Was there anything that disappointed you?
Not at all!
【Review】
I was concerned about the accuracy of the mounting holes since it is an external Screen, but there were no problems at all.
The transparency is quite satisfactory.
View detail
Total and good ACR-POINT domestic Screen (Price, Quality, Application)
[How is it used?
City ~Touring ~Circuit
Was the one you received as per Image?
Just the right size, 5cm up from NORMAL height
Was the installation difficult?
One Driver is all you need
The position of the mounting holes are gapped and need to be adjusted (depending on the individual).
Originally, Material:Since the plastic screws and the female screws of Rubber Bush are installed, the risk of breakage due to aging is large, so the NORMAL material is used separately.:It would be a good idea to order PlasticScrew and Rubber Bush female screws and replace them at the same time.
How was your experience with it?
When driving at high speeds of 100km/h, in the normal riding position, the wind flows from the neck to the upper helmet, providing good wind protection.
In addition, the windproof effect from the forward leaning Position and
Visibility through the Screen is good with no distortion.
View detail
exchange of new products
I thought about renewing the screen, and considered the inexpensive Thailand moth screen, but I was concerned about its accuracy, so after much deliberation, I decided to go with ACRYPOINT's ClearScreen. I was worried about the accuracy, so I decided to go with ACRYPOINT's ClearScreen. I was relieved to find that the product was almost OEM and solid. I am looking forward to installing it! View detail
change one's mood
Net only lists certain angles, so I added them. View detail
ACRYPOINT with a proven track record in Race!
It is not RACING but For Street, but the shape is the same as other manufacturer's RACING and it has a braid for Japanese Vehicle Inspection Correspondence, which is perfect for me who enjoys circuit driving. It is an exact product for me as I am a Circuit driver.
When you get down at Straight, the rim is just at eye level in OEM, so it is 5 cm higher than OEM, so visibility is likely to be better.
The Helmet is not in the way when it is in the prone position.
We are a Manufacturer with a proven track record in Race. [Color] I am also pleased with the clarity of Clear.
Also included is a new well nut, which is kind.
If I had to say something, I would say that the attached Sticker is Quantity.:1 pc. only
Quantity:Pair (for Left and Right) I would have been happy if there had been two pieces in the
View detail
Love it!!!
Love the windscreen, and clear acrylic visability. Brings the laminar trailing edge closer to the riders helmet. Grealy improves functionally for shorter riders with wind protection and improves aerodynamics with its sleek design. I rate this product a solid 10. View detail
Cospar good
It is much raised from the OEM as it looks and is expected to be aerodynamically related.
No visibility issues even with Smoke Shield. It looks quite good.
View detail
Replacement from OEMScreen
I changed from OEM Screen to ACRYPOINT Screen which seems to have high windproof effect.
I haven't tried any high speed driving or anything yet, so I'm giving it a 3 rating for effectiveness.
I like the low profile Style of the OEM, but I like the way it looks from the front.
No distortion, no BALI, clean finish and easy installation with Bolt On.
color is [Color] Smoke, but OEM. [Color] It is more purplish than Smoke.
As for the mounting part, OEM has HRubber, but AXIS re has only Bolt and Washer, so I wonder if it will be cracked or not.
View detail
Quality as good as OEM Product
It also came with Rubber moldings to put around the Screen, so I chose this one out of the many Screen ones!
It's exactly like OEMscreen.
The rubber molds and the length of the Screen change the look of the KATANA, so it was perfect for me who was concerned about the OEM face.
The price is a bit high, but the quality is perfect!
View detail
The security of JAPAN!
This is Screen from JAPAN!
Very solid product with very little distortion!
It is easy to replace with PortoOn and is perfect for a little dress-up.
View detail
ACRYPOINT Street Type Screen
My car: Kawasaki z900rs cafe. Modified product material: abs plastic. Modification effect: it looks good, the texture is very changeable with and without sunlight. Purpose: Reduce wind resistance on the chest and improve driving experience! Purchase experience: delivery time is very fast, the goods arrive soon, very satisfied! You can install it by yourself, without any damage! ---------------------------------------------- My motorcycle is Kawasaki z900rs cafe. The material of the product is plastic. The looks after modification has become beautiful. When there is sunlight and when there is no sunlight, its texture is different. I use it and feel the wind resistance on my chest is reduced. Lead to an improvement in my driving experience! Its installation does not need to damage the car, and it can be installed by itself. Webike delivery time is very fast, I am very satisfied! Powered by Google Translator View detail
It's not a mokko-feeling shape, but a gentle curve with no distortion and high texture.
After struggling with Zero Gras, Pooch, and MRA, the beauty of Curve and a moderate [Color] I was attracted to Smoke and bought it.
As for the wind blow of high speed, the direct hit from the chest to the upper part has been drastically reduced, the world of silence where nothing is felt if you get down with a little bit of concern about hitting your shoulders (laughs), the satisfaction level is higher than the Zero Gra that I bought before, and the fact that I corrected it with File about 1mm of the mounting hole is cancelled!
View detail
The product itself is fine, but the braid is short.
Purchased for replacement of the GSX1100SOEM Wind Screen, which is 30 years old from manufacture.
The shape and size are the same as OEM.
The screen that was scratched and yellowish [Color] It's good to become Clear and feel Large.
Product Information [Included] It's a little hard to tell if the Bolt is included in the way the
Not included.
It's a form of OEM Bolt removal and reuse
The molding around the Screen has been removed and is included in the package.
You will need to install it yourself (wrapping it around the outside of the package) after opening it.
Installing the maul is honestly a pain in the ass.
Push the edge of the Screen into the groove of the maul and
My fingers didn't have enough pressure, so I installed it while rubbing it against the edge of a desk or other object.
Also, since the attached braid is shorter than the entire circumference of the Screen
The center of the mall was installed with the center of the screen aligned with the top of the screen.
There is a portion of the screen that does not have a braid at the bottom of the screen, which is awkward (and incomplete).
Looking for rubber molds that are close in shape. "Addition. I plan to
View detail