Reviews
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
Can Refreshing the Rear
[How is it used?
The state of the OEM was not to my liking,
I installed it immediately.
Was the one you received as per Image?
It was exactly what was listed.
Was the installation difficult?
Torx wrench is required to remove OEM Parts.
Also, since the application of Screw lock is described for tightening,
We prepared this one as well.
DUCATI's License Frame is handled by drilling some holes in the frame,
Double-sided tape fastening without screw tightening was fine.
How was your experience with it?
OEM condition is unknown, but Rear tire sprung Small stone, etc.
Protection film was applied to the Tail lamps.
In addition, the OEMReflector had a crack in the threaded part of the OEMReflector at that time,
Replaced by DAYTONA.
If the Tail cowl is to be removed, it will interfere with the Tail cowl,
The Fender Eliminator must be removed first.
[Included Parts:were they on?
It comes with a handling Instruction Manual and several screws.
[Was there anything that disappointed you?
Not particularly.
View detail
The Instruction Manual was easy to understand and easy to install.
It was easy to install and the finish was excellent.
It was a little tricky to adjust the angle, but I am satisfied.
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
Cost-effective standard parts
Was the one you received as per Image?
The parts are carefully packaged with instructions and stickers×2.
Was the installation difficult?
If you follow the instruction manual, there is nothing difficult. However, when removing OEM parts, in addition to various hexagonal bar spanners and ordinary spanners, 2 sizes of Torque are required, which may be a little expensive if you need to purchase tools.
How was your experience with it?
The rigidity is solid, and the Blinker, which was PullPull all the way in OEMFender, feels fixed without shaking. (I think it is simply because the distance is shorter.)
I think it is good to be able to freely adjust the angle of the License Plate and the height of the mounting position. (I am a vulgar Stylele who fixes it in the shortest position.)
[Included Parts:were they on?
No Bolts were missing and there were no problems.
[Was there anything that disappointed you?
Nothing in particular, I have driven about 100km and there is no loosening of Bolt or Gap of Blinker or License Plate.
Point and hang of installation
When installing, it takes a bit of hang or large boldness to push the excess length of wiring into the tail cowl. There is a gap to push the wiring downward and upward, so it can be pushed into the cowl without breaking.
Availability and clarity of Instruction Manual
Naturally, the translation (please enter here, and there are several diagrams, so if you can read the assembly diagram of the Plastic model, you should be able to understand it without any problem.
Points to note
Since the OEM rubber bush is used in place of the OEM one, I thought that the rubber might crack during removal and installation if it has deteriorated over time. This is not a process that can be repeated too many times.
Opinions and requests to Manufacturer
Since the angle adjustment of the License Plate is stepless, I think it would be reassuring if they could tell us which angle would pass vehicle inspection if possible. (I guess if you are afraid of vehicle inspections, just go with the OEM)
View detail
If you are a Fender Eliminator who wants the direct-attachment feel of the License Plate, this is the one for you.
I was looking for a license plate to be attached directly to the body of the car as much as possible when converting to a Fender Eliminator, and I came across this product.
The easy-to-understand instruction manual for installation and handling is included, so DIY work could be carried out as if it were a plastic model.
It is recommended to use Screw lock agent to prevent loosening in various places, so it is advisable to prepare it in advance.
After the conversion, the Style is as good as the Image and the texture is satisfactory.
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
The first Custom came from Fender Eliminator
It is inexpensive, and since the appearance is hidden by the Number, I don't worry too much about it. View detail
Fits: DUCATI Monster 821, DUCATI Monster 797, DUCATI Monster 1200, DUCATI SUPERSPORT 950, DUCATI SUPERSPORT 950S, DUCATI SUPERSPORT 939S, DUCATI SUPERSPORT 939, DUCATI Monster 1200S
Homework 1
Somewhat fiddly!
However, it is highly complete.
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
A DUCATI classic
I chose this because it is a standard DUCATIFender Eliminator. I think that there is no problem including the angle etc. though there is a slight difference from other manufacturers. I had it installed at the time of delivery this time.
When you install it by yourself, it is not difficult work if you refer to the Net video etc.
View detail
DUKE390 Fender Eliminator
There are a lot of Fender Eliminator for DUKE390 current model, but I decided to use MotoCRAZY after a lot of consideration.
It is also the part that I liked very much because it feels like the most Number is directly attached, and I can choose two kinds of Number attachment angle in the law change from now on (Number fixed Frame is chosen either front or back).
View detail
Fits: DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD939
Rear fender-less for a more racy look
It is Moto Crazy's Fender Eliminator for Ducati, I used it for MONSTER1100evo, it is also good for HYPERMOTARD821, and it refreshing the rear very much. The price is cheap, and it is preeminent coolness thanks to the composition of the Parts of the minimum necessary for me personally. View detail
Fits: DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER ICON
Refreshing around the rear!
I installed it on my Ducati SCRAMBLER
I'm glad to see the rear area refreshed so much
The installation process was very easy and only took about 10 minutes
View detail
Fits: DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER ICON
Convincing Products
It will be installed on the 2019 New Model SCRAMBLER Icon
When I checked with the manufacturer, they said it would fit the New ModelIcon Purchased
I can't wait to install it because the rear area is Refreshing
View detail
Fits: DUCATI Monster 821, DUCATI Monster 797, DUCATI Monster 1200, DUCATI SUPERSPORT 950, DUCATI SUPERSPORT 950S, DUCATI SUPERSPORT 939S, DUCATI SUPERSPORT 939, DUCATI Monster 1200S
Blinker from Ducati Performance cannot be fitted
The texture of the product is very good, there is very little BALI! (There is a little BALI in the drilling part.) 。 However, because of the Bolt's method of fixing the Blinker, the DucatiPerformance Blinker cannot be installed View detail
Fits: DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER ICON
It is better if you have an explanation of details.
Please see the Catalog after the installation of the essential. It is refreshing and it feels nice.. The photo shows the photo after removing the existing License Plate Base. Currently we procure Black Bolt and close the hole.
Hexagon Bolt is heavily used for Ducati, and if you do not use good tools you will lick Bolt. Actually, when I was removing License Plate Light, I used Hexagonal Wrench on hand but I licked fine. After that, I investigated variously with Net and bought a tool of GERMANY called Wera and worked again, but it is highly recommended to use it very much. Bolt licked somehow. In work, diversion of License Plate Light takes a lot of time. In conclusion, it is best to disconnect the code near the License Plate Light and reconnect the code later. By the way, installation of Fender Eliminator Kit is easy.
View detail
Fender Eliminator Kit is fine and healthy.
I have been using it for 4 and a half since I installed it on DUCATI 1198SP.
At the time this was
I used it with LED Blinker with ACTIVE's License plate,
I like the Rear around quite clearly.
After extending from Seat Cowl to Silencer under Arm
License plate will be attached.
Because Arm is thin, Blinker's Coupler - I had a hard time to pay Wiring classes in Arm. (image)
In addition, it is easy to have LongNeck's hexagon Bit when installing.
(I think that Size was 5 mm or 6 mm, but since I installed it was quite a while ago - - -. )
Matte Black color Material is sturdy Material : Stainless Steel is.
The thickness is also 2. There is also 5 mm, even with the vibration of Big twin for many years there is no Trouble.
Design is unquestionable.
Also, if you want to lower the angle (Or if you want to raise) Because it is Stainless Steel
Even if you bend Bracket to a certain extent with power it will stick.
Reflector diverts OEM.
The price is also (Compared with other companies) Reasonable, real performance is also complaint without Recommendation.
View detail
Making and Style are the best
It is a product I bought before delivery.
I also looked at other companies' Fender Eliminator, but the product that appeared at the ideal position was Moto Crazy.
Items satisfying price (^^) v
I had trouble installing the Reflector - - -
View detail
MotoCrazy Material: Stainless SteelFender Eliminator
I think that likes and dislikes will be divided by Fender Eliminator, but I personally purchased it because I prefer this place from the OEM's Number position. I am pleased that the Rear around is refreshing and the thickness of Tire is emphasized. Installation was also not particularly difficult, and it was easy to do comparatively. View detail
1098 was equipped.The instruction manual has attached with the Smooth carefully and very intelligibly.I think that weight is felt a little since it is a product made from STAINLESS STEEL, but it does not change so much that it is pure. I
1098 was equipped.The instruction manual has attached with the Smooth carefully and very intelligibly.I think that weight is felt a little since it is a product made from
STAINLESS STEEL, but it does not change so much that it is pure.
If it will be the highest if angle adjustment etc. can be done individually, but a price is considered, this will think best kana.
View detail
Fits: DUCATI Streetfighter S, DUCATI Streetfighter, DUCATI STREETFIGHTER848, DUCATI Streetfighter S, DUCATI Streetfighter, DUCATI STREETFIGHTER848
Although my Motorcycle was STREETFIGHTER 848, it has equipped with it satisfactorily. The portion finally attached to a main part carries out the temporary stop of those who use a pure Nut previously, and after it puts wiring into inside, it tends to do
Although my Motorcycle was STREETFIGHTER 848, it has equipped with it satisfactorily. The portion finally attached to a main part carries out the temporary stop of those who use a pure Nut previously, and after it puts wiring into inside, it tends to do the direction which tightened the attached Nut. Structure is also solid and I think considering a price that a Quality is high. View detail
Fits: DUCATI ST2 S, DUCATI SS900 ie, DUCATI ST4s, DUCATI ST4, DUCATI ST3, DUCATI ST2, DUCATI SS750, DUCATI SS1000, DUCATI SS900 sport, DUCATI SS800 sport, DUCATI SS750 sport, DUCATI SS900 sport, DUCATI SS800 sport, DUCATI SS750 sport
Although it was natural, the circumference of rear ones felt it refreshed and the light feeling came out. The instruction manual was also able to make wearing satisfactory very intelligibly. Intensity is also enough and it remains unmoved it also in vib
Although it was natural, the circumference of rear ones felt it refreshed and the light feeling came out. The instruction manual was also able to make wearing satisfactory very intelligibly. Intensity is also enough and it remains unmoved it also in vibration of DUCATI. Charm can also divert a required pure Parts (a Reflector, License holder). Although Number light stopped having lit up immediately after wearing, when a Manufacturer is contacted, another thing is sent instantly, and he has no failure after that. View detail
Fits: DUCATI MONSTER S2R, DUCATI MONSTER S4R, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4, DUCATI MONSTER900, DUCATI MONSTER620, DUCATI MONSTER400, DUCATI MONSTER1000
If packing is opened while [Webike-monitor] goods arrive and are exciting, it is carefully subdivided into a plastic bag for each [ .. and ] parts of every, and is firmly packed up with the bubble wrap cushion sheet. The love over goods was felt.
If packing is opened while [Webike-monitor] goods arrive and are exciting, it is carefully subdivided into a plastic bag for each [ .. and ] parts of every, and is firmly packed up with the bubble wrap cushion sheet.
The love over goods was felt.
Attachment is easy at bolt on and its description attached is very intelligible.
Although the fender less kit made from aluminum of the other company was attached before, a crack enters without the ability to finish bearing vibration.
Before breaking into POKKIRI, of course, it is the lucky day heart in reinforcement in the product made from exchange and a stainless to this product, but black paint application of the frame of favorite horse and the same color is very pleasing.
It is a super-recommend.
(^0^)v
View detail