Reviews
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
Can Refreshing the Rear
[How is it used?
The state of the OEM was not to my liking,
I installed it immediately.
Was the one you received as per Image?
It was exactly what was listed.
Was the installation difficult?
Torx wrench is required to remove OEM Parts.
Also, since the application of Screw lock is described for tightening,
We prepared this one as well.
DUCATI's License Frame is handled by drilling some holes in the frame,
Double-sided tape fastening without screw tightening was fine.
How was your experience with it?
OEM condition is unknown, but Rear tire sprung Small stone, etc.
Protection film was applied to the Tail lamps.
In addition, the OEMReflector had a crack in the threaded part of the OEMReflector at that time,
Replaced by DAYTONA.
If the Tail cowl is to be removed, it will interfere with the Tail cowl,
The Fender Eliminator must be removed first.
[Included Parts:were they on?
It comes with a handling Instruction Manual and several screws.
[Was there anything that disappointed you?
Not particularly.
View detail
The Instruction Manual was easy to understand and easy to install.
It was easy to install and the finish was excellent.
It was a little tricky to adjust the angle, but I am satisfied.
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
Cost-effective standard parts
Was the one you received as per Image?
The parts are carefully packaged with instructions and stickers×2.
Was the installation difficult?
If you follow the instruction manual, there is nothing difficult. However, when removing OEM parts, in addition to various hexagonal bar spanners and ordinary spanners, 2 sizes of Torque are required, which may be a little expensive if you need to purchase tools.
How was your experience with it?
The rigidity is solid, and the Blinker, which was PullPull all the way in OEMFender, feels fixed without shaking. (I think it is simply because the distance is shorter.)
I think it is good to be able to freely adjust the angle of the License Plate and the height of the mounting position. (I am a vulgar Stylele who fixes it in the shortest position.)
[Included Parts:were they on?
No Bolts were missing and there were no problems.
[Was there anything that disappointed you?
Nothing in particular, I have driven about 100km and there is no loosening of Bolt or Gap of Blinker or License Plate.
Point and hang of installation
When installing, it takes a bit of hang or large boldness to push the excess length of wiring into the tail cowl. There is a gap to push the wiring downward and upward, so it can be pushed into the cowl without breaking.
Availability and clarity of Instruction Manual
Naturally, the translation (please enter here, and there are several diagrams, so if you can read the assembly diagram of the Plastic model, you should be able to understand it without any problem.
Points to note
Since the OEM rubber bush is used in place of the OEM one, I thought that the rubber might crack during removal and installation if it has deteriorated over time. This is not a process that can be repeated too many times.
Opinions and requests to Manufacturer
Since the angle adjustment of the License Plate is stepless, I think it would be reassuring if they could tell us which angle would pass vehicle inspection if possible. (I guess if you are afraid of vehicle inspections, just go with the OEM)
View detail
If you are a Fender Eliminator who wants the direct-attachment feel of the License Plate, this is the one for you.
I was looking for a license plate to be attached directly to the body of the car as much as possible when converting to a Fender Eliminator, and I came across this product.
The easy-to-understand instruction manual for installation and handling is included, so DIY work could be carried out as if it were a plastic model.
It is recommended to use Screw lock agent to prevent loosening in various places, so it is advisable to prepare it in advance.
After the conversion, the Style is as good as the Image and the texture is satisfactory.
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
The first Custom came from Fender Eliminator
It is inexpensive, and since the appearance is hidden by the Number, I don't worry too much about it. View detail
Fits: DUCATI Monster 821, DUCATI Monster 797, DUCATI Monster 1200, DUCATI SUPERSPORT 950, DUCATI SUPERSPORT 950S, DUCATI SUPERSPORT 939S, DUCATI SUPERSPORT 939, DUCATI Monster 1200S
Homework 1
Somewhat fiddly!
However, it is highly complete.
View detail
When you have bored up your moped 1 or for International Model moped 2.
The Australia Post Spec. CT110 HUNTER CUB does not have this mark, and I thought it would be better to have it. I bought it and installed it. It was easy to install and looks fine. I think the angle can be adjusted because it can be bent a little. View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
A DUCATI classic
I chose this because it is a standard DUCATIFender Eliminator. I think that there is no problem including the angle etc. though there is a slight difference from other manufacturers. I had it installed at the time of delivery this time.
When you install it by yourself, it is not difficult work if you refer to the Net video etc.
View detail
DUKE390 Fender Eliminator
There are a lot of Fender Eliminator for DUKE390 current model, but I decided to use MotoCRAZY after a lot of consideration.
It is also the part that I liked very much because it feels like the most Number is directly attached, and I can choose two kinds of Number attachment angle in the law change from now on (Number fixed Frame is chosen either front or back).
View detail
Fits: DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD939
Rear fender-less for a more racy look
It is Moto Crazy's Fender Eliminator for Ducati, I used it for MONSTER1100evo, it is also good for HYPERMOTARD821, and it refreshing the rear very much. The price is cheap, and it is preeminent coolness thanks to the composition of the Parts of the minimum necessary for me personally. View detail
Fits: DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER ICON
Refreshing around the rear!
I installed it on my Ducati SCRAMBLER
I'm glad to see the rear area refreshed so much
The installation process was very easy and only took about 10 minutes
View detail
Fits: DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER ICON
Convincing Products
It will be installed on the 2019 New Model SCRAMBLER Icon
When I checked with the manufacturer, they said it would fit the New ModelIcon Purchased
I can't wait to install it because the rear area is Refreshing
View detail
Fits: DUCATI Monster 821, DUCATI Monster 797, DUCATI Monster 1200, DUCATI SUPERSPORT 950, DUCATI SUPERSPORT 950S, DUCATI SUPERSPORT 939S, DUCATI SUPERSPORT 939, DUCATI Monster 1200S
Blinker from Ducati Performance cannot be fitted
The texture of the product is very good, there is very little BALI! (There is a little BALI in the drilling part.) 。 However, because of the Bolt's method of fixing the Blinker, the DucatiPerformance Blinker cannot be installed View detail
Mounting with Fender Eliminator Kit
LED Lamp on the Fender Eliminator Kit was very poor so I purchased this additionally.
There is no hard work because the installation is only co-tightening with the License Plate and processing of the LEAD line.
View detail
LED power supply compatible with AC power supply License Plate Lamp
Purchased to install License Plate Light on KDX 200SR.
Following the adjustment of the angle angle and the installation of the Reflector, it is now possible to run completely with confidence.
【What made you decide the purchase?】
As we increased Headatt's Watt count, we decided to make LED light with low power consumption.
Normal LED light can not be used with KDX of AC power supply, but it is thought that it can be diverted if this product for AC power supply GROM can also be diverted.
【How was it actually used?】
Thickness was thin, and it was installed on the back of Tail cowl.
Installation is strong Magic tape + Tie Wrap Fixing glued with cemedine.
In the vicinity of Idling there is insufficient power generation amount to illuminate the whole number, but when I confirmed by having a friend run behind, I can see the number sufficiently with white light during driving.
【Was it difficult to install? (Hard parts case)】
Because it is a product for GROM, Wiring was short and could not be attached to KDX as it was.
For that reason Wiring was extended processing.
Other than that it was installed without problems.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Adhesive Tape is attached to the product, but it alone is uneasy with Off car with many vibrations.
Therefore, peel off adhesive, attach strong Magic tape to License Plate Light and car body with Cemedine and adhere it, and fixed it with Tie Wrap.
It runs over 1000 km including off-road, but it does not fall at all.
[Is there anything I was disappointed about?]
None
【Hope for Manufacturer - Please let me know if you have any improvement points]
It is better to reduce the power consumption.
【Have you compared items?】
None, I can not find any other LED corresponding to the AC License Plate Lamp.
[Others]
For now and so on etc. Although there is not, but this product diverts the commodity for GROM to the last, I think that complaints can not be said even if it breaks suddenly.
Anyway, it is now possible to run completely with peace of mind by attaching this product following adjustment of Number angle, Reflector, from the state of almost Number only state.
View detail
Fits: DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER ICON
It is better if you have an explanation of details.
Please see the Catalog after the installation of the essential. It is refreshing and it feels nice.. The photo shows the photo after removing the existing License Plate Base. Currently we procure Black Bolt and close the hole.
Hexagon Bolt is heavily used for Ducati, and if you do not use good tools you will lick Bolt. Actually, when I was removing License Plate Light, I used Hexagonal Wrench on hand but I licked fine. After that, I investigated variously with Net and bought a tool of GERMANY called Wera and worked again, but it is highly recommended to use it very much. Bolt licked somehow. In work, diversion of License Plate Light takes a lot of time. In conclusion, it is best to disconnect the code near the License Plate Light and reconnect the code later. By the way, installation of Fender Eliminator Kit is easy.
View detail
Recommended for those who do DIY!
Since I do not want to use Gold as Fender Eliminator, I bought a kit with only Lamp and Bracket.
By bracketing with Bracket Number, Lamp comes just right.
The shape of Lamp is also Small until now so simple, so I think that there is no discomfort in any Motorcycle.
It is easy to connect with NORMAL's License Plate Light.
View detail
Fender Eliminator Kit is fine and healthy.
I have been using it for 4 and a half since I installed it on DUCATI 1198SP.
At the time this was
I used it with LED Blinker with ACTIVE's License plate,
I like the Rear around quite clearly.
After extending from Seat Cowl to Silencer under Arm
License plate will be attached.
Because Arm is thin, Blinker's Coupler - I had a hard time to pay Wiring classes in Arm. (image)
In addition, it is easy to have LongNeck's hexagon Bit when installing.
(I think that Size was 5 mm or 6 mm, but since I installed it was quite a while ago - - -. )
Matte Black color Material is sturdy Material : Stainless Steel is.
The thickness is also 2. There is also 5 mm, even with the vibration of Big twin for many years there is no Trouble.
Design is unquestionable.
Also, if you want to lower the angle (Or if you want to raise) Because it is Stainless Steel
Even if you bend Bracket to a certain extent with power it will stick.
Reflector diverts OEM.
The price is also (Compared with other companies) Reasonable, real performance is also complaint without Recommendation.
View detail
Making and Style are the best
It is a product I bought before delivery.
I also looked at other companies' Fender Eliminator, but the product that appeared at the ideal position was Moto Crazy.
Items satisfying price (^^) v
I had trouble installing the Reflector - - -
View detail
MotoCrazy Material: Stainless SteelFender Eliminator
I think that likes and dislikes will be divided by Fender Eliminator, but I personally purchased it because I prefer this place from the OEM's Number position. I am pleased that the Rear around is refreshing and the thickness of Tire is emphasized. Installation was also not particularly difficult, and it was easy to do comparatively. View detail