Reviews
Fits: TRIUMPH TIGER1200XRT, TRIUMPH TIGER EXPLORER XRx LOW, TRIUMPH TIGER EXPLORER XR, TRIUMPH TIGER EXPLORER XCA, TRIUMPH TIGER EXPLORER XC, TRIUMPH TIGER EXPLORER XCx, TRIUMPH TIGER EXPLORER XCx, TRIUMPH TIGER EXPLORER XC, MV AGUSTA TURISMO VELOCE 800, DUCATI SCRAMBLER URBAN ENDURO, DUCATI MONSTER 821, APRILIA TUONO V4R APRC, APRILIA TUONO V4 1100 Factory, APRILIA CAPONORD 1200, TRIUMPH TIGER EXPLORER XC, TRIUMPH TIGER EXPLORER, TRIUMPH STREET TRIPLE R LOW, TRIUMPH STREET TRIPLE R, Others BOMBARDIER-CAN AM SPYDER STS, Others BOMBARDIER-CAN AM SPYDER ST STS
It's performing well enough.
We are also on Full Cowl, so we have no choice.
I felt that the single disc was not effective enough, so I replaced it with a Red Pad.
It works well enough for a fun ride on the Circuit to the mountain pass.
It's just how it works with Single disc.
It's funny to compare it with Double or something like that in the sense of Nemoto Full Cowletc. (laughs).
If you are buying an expensive item from another Manufacturer, why not use a Single?
View detail
Fits: HONDA CBR1100XXBlack Bird, HONDA CBR1100XXBlack Bird, HONDA ST1100A Pan-European, HONDA ST1100A Pan-European, HONDA ST1300 Pan-European, HONDA VFR800, HONDA VFR800, HONDA VFR800ABS, HONDA VFR800ABS, HONDA VFR, HONDA VFR, HONDA VTX1800, HONDA VTX1800, HONDA VTX1800C, HONDA VTX1800C, HONDA VTX1800R, HONDA VTX1800R, HONDA VTX1800S, HONDA VTX1800S, HONDA X11
Great Control
There were few options for Pad for Pin slide caliper for my Motorcycle, only Resin pad.
Since brembo has lineuped Sintered pad, I bought it without hesitation.
After the replacement, the new wheel is acclimated quickly, and both control and braking power are dramatically improved.
I was surprised to see how much difference just a pad can make.
I don't know about the durability yet, but I am satisfied with Large when I experience such high performance.
View detail
Fits: SUZUKI GSF1200, SUZUKI GSF1200S, SUZUKI GSX-R1100, SUZUKI GSX-R400R SP-II, SUZUKI GSX-R400R-SP, SUZUKI GSX-R750, SUZUKI GSX-R750R, SUZUKI GSX-R750W, SUZUKI GSXR400R, SUZUKI RF900R, SUZUKI RF900R, YAMAHA FZR750R, Others , Others
Genuine Brembo Sintered Front Brake Pads for Suzuki RF900R 1997
This old girl was in need of a new front and rear pad change and the customer decided they wanted to give the Brembo Sintered SA a go to see if they suited. Finding the right pad set for this bike was not as hard as I thought it would be with it being so old. Brembo did have a couple of different compounds available for this but I though the racing ones were a bit overboard. Anyway, after checking Brembo website for fitments I then found these on Webike at a great overall price for the front and rear. I used EMS fast service and the order was delivered to my door within a week. All items in the order were packaged really well and any spaces in the outer box was filled out with extra padding. The pads came in their own packet which was sealed. The pads are just awesome. These will make you stop far better than some other brands in the same price range. The pads are well made and the sintered part shows no sign of degredation like some brands even when new. Just buy them and don't worry, you will stop. Thank for the great service Webike. Fantastic View detail
Fits: KAWASAKI Z800, SUZUKI SV650 S, SUZUKI SV650, SUZUKI GLADIUS650400ABS, SUZUKI SV650, SUZUKI SV650X, SUZUKI SV650 S, SUZUKI SFV650, SUZUKI GSX250R, SUZUKI SFV650, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI GSR250S, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI DL250 V-STROM250, SUZUKI DL250 V-STROM250, KAWASAKI Z900, KAWASAKI Z900, HONDA X-ADV
Genuine Brembo Front Pads for Kawasaki Z900
Brembo are a cracking brand when it comes to brake pads. Honestly, they are absolutley awesome. This bike is one of my own and has Brembo retro fitted calipers which does brake heavy and thought I would try the sintered ones first. Finding the correct part was pretty easy as I visited Brembo website and put my caliper details in. Webike had these in stock and so ordered with a few other parts. The shipping was fast and via EMS, delivered to me in 5 days. All was packed really well and did not move during transit, no damage at all. The pads came in their own Brembo branded packet and arrived with no chips or any visual damage at all. They feel solid and as they are heavily sintered and also have a fairly high heat resistance. Haviong used brembo pads many times before, the fiting is really straight forward and it takes little time to get these bedding in correctly. Very pleased and the bike will be stopping on a penny from now on. View detail
Fits: SUZUKI V-STROM1050, SUZUKI V-STROM1050 XT, SUZUKI V-STROM1000, SUZUKI V-STROM1000, SUZUKI V-STROM1000 X, SUZUKI V-STROM1000 XT, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZX-10R, SUZUKI GSX-R1000, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI Z1000
Genuine Brembo Front Brake Pads for Kawasaki Z1000
These were a direct replacement for the OEM front brake pads on the Z1000. The customer wanted to try a different brand as opposed to the OEM ones for a change. They said their initial bite on the stock ones was not great. Not matter, Brembo do great replacements for stock bike calipers and this was also an excellent alternative. Fid=nding the right set of pads was straight forward and referenced from Brembo's own website. The price was foar better than could be sourced from the local Brembo stockist. Nice one. With some other parts I needed I had them all shipped using EMS and the order arrived in 5 days from being shipped out. ALl very well packaged and even though these do come in the standard Brembo brake pad pack, they were still wrapped in bubble wrap by Webike. The pads are a really good quality compound, really meaty sinter in them which is what most sportsbikes need. I have personally had good experience from the SA compound of the Brembo's and rate them very highly. The customer seemed happy and that in turn makes me happy. Thank you Webike. View detail
Fits: BMW F 650 GS, YAMAHA XT660Z Tenere, KTM 660LC4, BMW S1000R, HUSABERG FC550, HUSABERG FC550, HUSABERG FC450, HUSABERG FC450, HUSABERG FC, HUSABERG FC, HUSABERG FC, HONDA SLR650 VIGOR, HONDA NX650DOMINATOR, HONDA FX650VIGOR, HONDA CB S, HONDA CB, GASGAS MC, GASGAS EC300, GASGAS EC250, GASGAS EC200
I knew it! Brembo!
The Pad that originally came with it was getting very thin, so we replaced it.
At first, I wondered if the stop was worse than before. I thought that it was worse than before, but I drove on.
After running for a while and some heat, it settled down to a smooth stop, just the way I like it.
KTM is a BYBRE Caliper, which means that the braking power is fine, but until now it has felt like it was working too hard for me with the kakkun.
If you are asking if brembo's Pad is unstoppable, rest assured that it is not at all.
The brake system is brembo after all.
View detail
Fits: DUCATI MONSTER1100S, DUCATI MONSTER1100S, DUCATI MONSTER1100DIESEL, DUCATI HYPERMOTARD, DUCATI HYPERMOTARD1100S, DUCATI HYPERMOTARD796, DUCATI M1200 S, DUCATI HYPERSTRADA, DUCATI 848EVO, DUCATI 848, DUCATI 800SPORT, DUCATI 749S, DUCATI 749R, DUCATI 749, DUCATI 999S AMA, DUCATI 999R, DUCATI 999R XEROX, DUCATI 999, DUCATI 899, DUCATI 899 PANIGALE
The color of the color insert that can be glimpsed is Race ish.
I did not choose the rear brake because of its effectiveness, but because I am a brembo believer.
I liked it because of its brembo-like Controllable nature.
I like the vermilion color of the back plate because it creates a race-ish atmosphere.
Since it is a rear brake, durability also depends on the individual, but it seems to work for a long time.
Since the bite is not attached immediately after replacement, you may feel a lack of potency, so pad break-in is a must.
I have not used this Pad in Circuit yet, but it is easy to use in OEM same etc.
View detail
Fits: YAMAHA Brembo P4.30|34 1PIN, YAMAHA P4 caliper, YAMAHA Brembo P4.30|34 1PIN, YAMAHA P4 caliper
Genuine Brembo Racing Pads for Brembo P4 caliper.
These were a purchase to find out just how well these pads actually perform during track days. I have had different branded race pads before but these are supposed to be the mutts nuts. Having heard a lot of good reviews, finding the correct part for my calipers was not hard at all. I cross referenced with Brembo website directly too. The price of these pads is not cheap but you do get what you pay for when it comes to Brembo and particularly, race pads. I did need a set of pads that could withstand a very high temp and these ones did not disappoint. I had a couple of other small items in my order too which made the shipping pretty reasonable. These pads are not the lightest but the smaller parts were kept nice and safe during transit with all the padding Webike added. The pads arrived safely and upon inspection, I was very surprised to find no dust or contaminants in the packets. They came in the standard Brembo pad packets as always. You know you are getting the real deal when they come in those packets. The pads fitted my calipers really easily, a little free space but just enough not to have to worry about. The pads performed superb during a spirited track day as Cadwell park in the UK. Probably too well if I'm honest as this is a short track anyway. I think the reason some peopel do not rate these pads is that they are not getting them hot enough, these really do need pushing to get the performance they are meant for. These will most definitely be on my list again. Very impressed. If you want some great pads that perform under great stress, get these. View detail
Fits: HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FAZER8, YAMAHA FAZER8, SUZUKI BANDIT1250, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI SV1000 S, SUZUKI KATANA
Replaced at the same time as bremboDisc Rotor
Replaced together with bremboDisc Rotor.
It stops cleanly and has no control issues.
However, when you put it on, you can't tell it's brembo by its appearance.
View detail
Fits: KAWASAKI H2R, KAWASAKI ZX 14 R, APRILIA RS 660, APRILIA RSV1000R, APRILIA RSV1000R Factory, APRILIA RSV4, APRILIA RSV4 APRC ABS, APRILIA RSV4 Factory, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA RSV4 RR, APRILIA Tuono, APRILIA Tuono R, APRILIA Tuono V4 1100 RR, APRILIA Tuono V4 Factory 1000, APRILIA Tuono V4 R, APRILIA Tuono V4 R 1000, APRILIA Tuono V4 RR 1100, BENELLI TNT Cafe, BENELLI TNT R160
Used in place of OEM.
I bought the OEM SC82 Brake Pads and they are very expensive. The thickness of the back plate is different from OEM, but I can't tell the difference.
I am satisfied with the normal use of the product.
They are sold cheaply on the Net, but fakes are also distributed.
I buy from this Site, which is an authorized distributor.
View detail
Fits: KAWASAKI H2R, KAWASAKI ZX 14 R, APRILIA RS 660, APRILIA RSV1000R, APRILIA RSV1000R Factory, APRILIA RSV4, APRILIA RSV4 APRC ABS, APRILIA RSV4 Factory, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA RSV4 RR, APRILIA Tuono, APRILIA Tuono R, APRILIA Tuono V4 1100 RR, APRILIA Tuono V4 Factory 1000, APRILIA Tuono V4 R, APRILIA Tuono V4 R 1000, APRILIA Tuono V4 RR 1100, BENELLI TNT Cafe, BENELLI TNT R160
It's a matter of life and that's why we have BREMBO.
I purchased this along with the Caliper replacement.
I was using an inexpensive pad to begin with, but one day, while riding around town, the car in front of me suddenly Braked just before a crosswalk,
I try hard to Brake back and forth without thinking of myself, but because of the inexpensive Pad, I stopped just short of almost bumping into it or not.
We didn't hit each other, but we were only about 50 cm away from the car in front of us. That's a Large change dangerous. That was a good opportunity for me to never save my life! With that in mind, I bought the brembo standard pad. it is OEM installed on M50M40 and other Calipers, so performance is not a problem at first, and since it is brembo, that is also a relief.
I installed it as soon as it arrived, and when I tried it on the road, I was amazed at the braking power, and I am sure I will be able to stop safely in any case.
View detail
Fits: Others , KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z1000, KAWASAKI 1400GTR, KAWASAKI 1400GTR, KAWASAKI ZX-6R, KAWASAKI ZX-6R
This is brembo!
I didn't like the OEMPad and switched to brembo.
The soft Touch shortens the braking distance and makes it easier to Control. It's a quintessential brembo!
View detail
Fits: HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FAZER8, YAMAHA FAZER8, SUZUKI BANDIT1250, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI SV1000 S, SUZUKI KATANA
Purchased with Rear disk rotor
I bought it together with brembo's rear disk rotor when I purchased it.
I haven't installed it yet, but I have no complaints about the quality and appearance of the product.
I will make an impression when I install it again.
View detail
Fits: HONDA ADV150, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA PCX HYBRID, HONDA PCX150ABS, HONDA PCX160, HONDA PCX, HONDA PCXe:HEV
Buy before and after
Since I was planning to go touring in the near future, I inspected the car in advance and checked mainly the consumable parts.
After checking, I found that there were almost no Brake Pads in both front and back, so I hurried to purchase them.
It was in stock and arrived immediately and in time for Touring.
And because it is made by brembo, the brake also works well. I used to use Red Pad, but when I changed to brembo this time, I decided to use brembo from now on because it is inexpensive but has good performance.
This product is for the front of CRF250.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CBR125R, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA GROM, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI Gixxer 150., HONDA CB150R, HONDA CB300R
Buy before and after
Since I was planning to go touring in the near future, I inspected the car in advance and checked mainly the consumable parts.
After checking, I found that there were almost no Brake Pads in both front and back, so I hurried to purchase them.
It was in stock and arrived immediately and in time for Touring.
And because it is made by brembo, the brake also works well. I used to use Red Pad, but when I changed to brembo this time, I decided to use brembo from now on because it is inexpensive but has good performance.
This product is for the rear of CRF250.
View detail
Fits: BMW F 650 GS, YAMAHA XT660Z Tenere, KTM 660LC4, BMW S1000R, HUSABERG FC550, HUSABERG FC550, HUSABERG FC450, HUSABERG FC450, HUSABERG FC, HUSABERG FC, HUSABERG FC, HONDA SLR650 VIGOR, HONDA NX650DOMINATOR, HONDA FX650VIGOR, HONDA CB S, HONDA CB, GASGAS MC, GASGAS EC300, GASGAS EC250, GASGAS EC200
Reliable Brand
Brembo is now the standard equipment on the upper models, but the red color is very noticeable because of the fine detail on the Brake Pads.
SPMODEL is a product that is not intended for racing, so it can be used on public roads.
The product itself is easy to Control and feels good.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09 TRACER, YAMAHA MT-09 SP, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-01, YAMAHA FZR400RR, YAMAHA FZS1000 FAZER, YAMAHA FZS600FAZER, YAMAHA FZ8, YAMAHA FZR400RR-SP, YAMAHA FZ1-S, YAMAHA FZ1-N, YAMAHA BT1100, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FJR1300 A, YAMAHA FJR1300 AS
Genuine Brembo Racing Compound Brake Pads for GP4RX
These were a purchase that I had made as I was putting the bike through it's paces on the track and wanted something with a little more bite than road pads. Finding the correct pads for the calipers was not particularly hard. I used the tools Webike provide along with cross referencing with Brembo website. The pads were a very good purchase at the time as Webike head some Brembo pads on offer. I had a few other parts in my order and as I do this a lot, combining the items to ship together saved a lot of money too. I used EMS and they got my order to me in perfect condition and with no delay in 5 days from Webike shipping. The order was well packed and heavier items such as these pads were wrapped in bubble wrap to stop them from damaging anything else in my order. The pads themselves came in the standard Brembo pad packaging and were kept nice and secure. They have a stronger and more robust pad material and more heat is needed but when you are on a track, this is not a problem. They did work a little better than teh road version but it was treacherous conditions half way through the day so maybe I did not get all the feeling I probably should've done. Really good pads, these will be on my orders again. Thank you for the pleasant experience Webike. Brillaint work. View detail
Fits: DUCATI MONSTER1100S, DUCATI MONSTER1100S, DUCATI MONSTER1100DIESEL, DUCATI HYPERMOTARD, DUCATI HYPERMOTARD1100S, DUCATI HYPERMOTARD796, DUCATI M1200 S, DUCATI HYPERSTRADA, DUCATI 848EVO, DUCATI 848, DUCATI 800SPORT, DUCATI 749S, DUCATI 749R, DUCATI 749, DUCATI 999S AMA, DUCATI 999R, DUCATI 999R XEROX, DUCATI 999, DUCATI 899, DUCATI 899 PANIGALE
Genine Brembo Rear Brake Pad SP Compound
This was a set that I needed to replace the pnes I previously had in the bike. I wanted to try and match the rears with the front but not quite as agressive for the rear as it is not used that much on a track day. Not hard to find the right pads for the rear caliper, it's a Brembo 2 pot version, pretty standard. I used the tools Webike provide and then cross referenced with Brembo website for my own peace of mind. I had a few other parts in my order including the RC front pads which I was matching with. Because I combine some of my parts into one order, the cost of shipping is a lot cheaper than getting them individually. EMS is who I use these days as they just get the job done fast and efficiently. My order arrived in 5 days from Webike warehouse sending my order. What's not to love about that. The pads came in a Brembo packet and aslo Webike secured them in a bubble wrapping for safety and to keep my other parts safe from damage in transit. These pads are a road compound but are plenty for a track day as I personally do not use the back brake a lot anyway. They had a good matieral on the pad, plenty of meat on there for sure. They performed very well even though the conditions on the day weakened as the day went on. I was still very impressed with the pads anyway. Great work Webike, very pleased with this purchase. View detail
Fits: HONDA ADV150, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA PCX HYBRID, HONDA PCX150ABS, HONDA PCX160, HONDA PCX, HONDA PCXe:HEV
It is a Pad that works softly and is easy to plunge into.
It is an easy-to-handle Pad.
The decrease is surprisingly fast.
View detail
Fits: YAMAHA BT1100, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FJR1300 A, YAMAHA FJR1300 AS, YAMAHA FJR1300, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-6, YAMAHA FZ1-N, YAMAHA FZ1-S, YAMAHA FZ8, YAMAHA FZR400RR-SP, YAMAHA FZR400RR, YAMAHA FZS1000 FAZER, YAMAHA FZS600FAZER, YAMAHA MT-01, YAMAHA MT-07
When I installed these brake pads, I was very surprised how my motorcycle could slow down. delivery was very fast. View detail