Reviews
Fits: HONDA CBR1100XXBlack Bird, HONDA CBR1100XXBlack Bird, HONDA ST1100A Pan-European, HONDA ST1100A Pan-European, HONDA ST1300 Pan-European, HONDA VFR800, HONDA VFR800, HONDA VFR800ABS, HONDA VFR800ABS, HONDA VFR, HONDA VFR, HONDA VTX1800, HONDA VTX1800, HONDA VTX1800C, HONDA VTX1800C, HONDA VTX1800R, HONDA VTX1800R, HONDA VTX1800S, HONDA VTX1800S, HONDA X11
Great Control
There were few options for Pad for Pin slide caliper for my Motorcycle, only Resin pad.
Since brembo has lineuped Sintered pad, I bought it without hesitation.
After the replacement, the new wheel is acclimated quickly, and both control and braking power are dramatically improved.
I was surprised to see how much difference just a pad can make.
I don't know about the durability yet, but I am satisfied with Large when I experience such high performance.
View detail
bremboBrake lever
Installed on Ducati 400SS.
Since only one of them was BlackLever, I was satisfied with the uniformity.
It was easy to install
View detail
Fits: SUZUKI GSF1200, SUZUKI GSF1200S, SUZUKI GSX-R1100, SUZUKI GSX-R400R SP-II, SUZUKI GSX-R400R-SP, SUZUKI GSX-R750, SUZUKI GSX-R750R, SUZUKI GSX-R750W, SUZUKI GSXR400R, SUZUKI RF900R, SUZUKI RF900R, YAMAHA FZR750R, Others , Others
Genuine Brembo Sintered Front Brake Pads for Suzuki RF900R 1997
This old girl was in need of a new front and rear pad change and the customer decided they wanted to give the Brembo Sintered SA a go to see if they suited. Finding the right pad set for this bike was not as hard as I thought it would be with it being so old. Brembo did have a couple of different compounds available for this but I though the racing ones were a bit overboard. Anyway, after checking Brembo website for fitments I then found these on Webike at a great overall price for the front and rear. I used EMS fast service and the order was delivered to my door within a week. All items in the order were packaged really well and any spaces in the outer box was filled out with extra padding. The pads came in their own packet which was sealed. The pads are just awesome. These will make you stop far better than some other brands in the same price range. The pads are well made and the sintered part shows no sign of degredation like some brands even when new. Just buy them and don't worry, you will stop. Thank for the great service Webike. Fantastic View detail
Fits: KAWASAKI Z800, SUZUKI SV650 S, SUZUKI SV650, SUZUKI GLADIUS650400ABS, SUZUKI SV650, SUZUKI SV650X, SUZUKI SV650 S, SUZUKI SFV650, SUZUKI GSX250R, SUZUKI SFV650, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI GSR250S, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI DL250 V-STROM250, SUZUKI DL250 V-STROM250, KAWASAKI Z900, KAWASAKI Z900, HONDA X-ADV
Genuine Brembo Front Pads for Kawasaki Z900
Brembo are a cracking brand when it comes to brake pads. Honestly, they are absolutley awesome. This bike is one of my own and has Brembo retro fitted calipers which does brake heavy and thought I would try the sintered ones first. Finding the correct part was pretty easy as I visited Brembo website and put my caliper details in. Webike had these in stock and so ordered with a few other parts. The shipping was fast and via EMS, delivered to me in 5 days. All was packed really well and did not move during transit, no damage at all. The pads came in their own Brembo branded packet and arrived with no chips or any visual damage at all. They feel solid and as they are heavily sintered and also have a fairly high heat resistance. Haviong used brembo pads many times before, the fiting is really straight forward and it takes little time to get these bedding in correctly. Very pleased and the bike will be stopping on a penny from now on. View detail
Fits: SUZUKI V-STROM1050, SUZUKI V-STROM1050 XT, SUZUKI V-STROM1000, SUZUKI V-STROM1000, SUZUKI V-STROM1000 X, SUZUKI V-STROM1000 XT, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZX-10R, SUZUKI GSX-R1000, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI Z1000
Genuine Brembo Front Brake Pads for Kawasaki Z1000
These were a direct replacement for the OEM front brake pads on the Z1000. The customer wanted to try a different brand as opposed to the OEM ones for a change. They said their initial bite on the stock ones was not great. Not matter, Brembo do great replacements for stock bike calipers and this was also an excellent alternative. Fid=nding the right set of pads was straight forward and referenced from Brembo's own website. The price was foar better than could be sourced from the local Brembo stockist. Nice one. With some other parts I needed I had them all shipped using EMS and the order arrived in 5 days from being shipped out. ALl very well packaged and even though these do come in the standard Brembo brake pad pack, they were still wrapped in bubble wrap by Webike. The pads are a really good quality compound, really meaty sinter in them which is what most sportsbikes need. I have personally had good experience from the SA compound of the Brembo's and rate them very highly. The customer seemed happy and that in turn makes me happy. Thank you Webike. View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R6 S, YAMAHA YZF-R6, YAMAHA YZF-R1 SP, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF 1000R, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZS 1000, YAMAHA FZ8, SUZUKI GSX-R 750, SUZUKI GSX-R 600, SUZUKI GSX-R 1000 R, SUZUKI GSX-R 1000, APRILIA RSV4 APRC, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6
Genuine Brembo CLutch Lever fitted to YZF-1 2003
The YZF-R1 has already got a nice Brembo clutch system and the lever had seen better days so a replacement was needed. Finding the right lever was not hard as I already had the part number from a previous purchase direct from Brembo. However, the price that I paid for that was a bit high and I was pleasantly surprised that Webike did actually stock this precise lever. I had a couple of other smaller parts due to be ordered so I got them all shipped together to save on the cost of this. EMS is my chosen courier these days as their prices are superb and the amount of time it takes for the order to be delivered is perfect. 5 days from being shipped from Webike and my order arrived successfully. All was really well padded out with bubble wrap and no damage was found. This lever did come in the Brembo plastic packaging anyway and was still put inside a nice padded envelope for safety. I have never had any issues with Brembo lever for fitment as they are extremely precision made to a very high standard. The glossy paint finish is very tactile and lovely to touch. The mechanism of the lever is smooth as you like. One very happy customer. The bike looks amazing, thanks Webike for all your help. View detail
Brembo Repair Kit
I needed a new rubber boot for a Brembo RCS 19 master cylinder, but Brembo dont sell this part on its own. My only options was to buy the kit for the XR master cylinder, as the rubber boot will fit both. The price from Webike was the best around, far cheaper than anywhere else. This kit allowed me to make the repair at a resonable price. Thanks Webike View detail
Fits: BMW F 650 GS, YAMAHA XT660Z Tenere, KTM 660LC4, BMW S1000R, HUSABERG FC550, HUSABERG FC550, HUSABERG FC450, HUSABERG FC450, HUSABERG FC, HUSABERG FC, HUSABERG FC, HONDA SLR650 VIGOR, HONDA NX650DOMINATOR, HONDA FX650VIGOR, HONDA CB S, HONDA CB, GASGAS MC, GASGAS EC300, GASGAS EC250, GASGAS EC200
I knew it! Brembo!
The Pad that originally came with it was getting very thin, so we replaced it.
At first, I wondered if the stop was worse than before. I thought that it was worse than before, but I drove on.
After running for a while and some heat, it settled down to a smooth stop, just the way I like it.
KTM is a BYBRE Caliper, which means that the braking power is fine, but until now it has felt like it was working too hard for me with the kakkun.
If you are asking if brembo's Pad is unstoppable, rest assured that it is not at all.
The brake system is brembo after all.
View detail
Fits: DUCATI MONSTER1100S, DUCATI MONSTER1100S, DUCATI MONSTER1100DIESEL, DUCATI HYPERMOTARD, DUCATI HYPERMOTARD1100S, DUCATI HYPERMOTARD796, DUCATI M1200 S, DUCATI HYPERSTRADA, DUCATI 848EVO, DUCATI 848, DUCATI 800SPORT, DUCATI 749S, DUCATI 749R, DUCATI 749, DUCATI 999S AMA, DUCATI 999R, DUCATI 999R XEROX, DUCATI 999, DUCATI 899, DUCATI 899 PANIGALE
The color of the color insert that can be glimpsed is Race ish.
I did not choose the rear brake because of its effectiveness, but because I am a brembo believer.
I liked it because of its brembo-like Controllable nature.
I like the vermilion color of the back plate because it creates a race-ish atmosphere.
Since it is a rear brake, durability also depends on the individual, but it seems to work for a long time.
Since the bite is not attached immediately after replacement, you may feel a lack of potency, so pad break-in is a must.
I have not used this Pad in Circuit yet, but it is easy to use in OEM same etc.
View detail
Push rodPivot is easier to reduce than Lever pivot
It is a brembo RadialPump type RACINGMaster Cylinder, not a recent one, but the first RadialPump repair kit.
The Lever pivot pin portion and the Push Rod Pivot Pin portion will decrease, so if there is any rattling, replace it.
However, it is true that the RadialPump is subject to rubbing, so wear is inevitable if it is used for a long time.
Lever is Material:Aluminum is forged, not cast, as used in domestic OEMs.
Solidly hard and precise with no rattles.
This will rattle slightly after use (mainly in the front-back direction) and should be replaced when this happens.
Since there is no visible decrease in the amount, replace it when there is a slight change in feel.
RadialPump levers are very sturdy, so if they are well lubricated and maintained, they are unlikely to be reduced to the replacement level, except in the event of a fall.
However, even a slight decrease in the amount of the lever body will cause a noticeable deterioration in the feel of the lever, so it is recommended to use the quantity together with the lever body, Push Rod Pivot Pin, and Lever pivot pin.:1 Set of 3-items should be replaced by 3-items.
It costs a lot of money, but since RadialPump was originally developed for works machines, it can't be helped.
Don't be stingy in replacing it, as a worn one will ruin the feel of the RadialPump.
I have never fallen down, so I have not experienced how easy it is to break a lever in a fall, but my acquaintance's lever must be very sturdy because it did not break at all even after being blown off many times by a Circuit.
There is also Retractable Lever, but I guess it's not necessary unless you are a hardcore User who VANVAN falls over in Circuit.
View detail
It is the part that exerts the most force, so it should be replaced immediately when it decreases!
It is a brembo RadialPump type RACINGMaster Cylinder, not a recent one, but the first RadialPump repair kit.
The RadialPump is characterized by a small change in rotation angle when the lever is operated, so it does not wear down as much as a horizontally mounted Master Cylinder, but even so, it is a fact that the RadialPump is rubbed, so wear is inevitable. However, it is a fact that RadialPump is rubbed, so wear is inevitable if it is used for a long period of time.
Hard coating is applied to the surface of the steel pins, but once this coating is removed, the pins will wear down quickly, so they should definitely be replaced when the coating has worn down to that level.
Basically, Quantity together with LeverBody and Push Rod Pivot Pin:1 Set of 3-items will be exchanged.
Although it is very expensive for a mere pin and a small part, it is important to replace it without being stingy, because a worn pin will ruin the feel of the RadialPump.
If the grease is used without it, the amount of grease will decrease very quickly, so it is important to lubricate the area with a large amount of grease.
If we talk about usable/unusable Parts, they are usable even if they are considerably reduced, but that does not make sense to use RadialPump.
This is even more so with the Initial ModelRACINGMaster Cylinder, which eliminates flashy and generally popular features (superfluous functions) and pursues only LeverFeel.
The pivot, which has the least angle variation, is also the part that exerts the most force!
View detail
The large part of the moving parts is the most important part of the rotation angle, so it should be replaced immediately when it is reduced!
It is a brembo RadialPump type RACINGMaster Cylinder, not a recent one, but the first RadialPump repair kit.
It will be the for replacement of the rounded area on the Lever when viewed from above.
The feature of RadialPump is that the change in rotation angle during lever operation is small, so it does not decrease as much as a horizontally mounted Master Cylinder, but even so, wear is inevitable after many years of use because of the fact that it is rubbed.
Hard coating is applied to the surface of iron pins, but once this coating is removed, the pins will wear down quickly, so they should definitely be replaced when the coating is reduced to that level.
More specifically, it is ideal to replace the lever if you feel any rattling when moving it back and forth, and basically it should be replaced together with the lever body and lever pivot pin.:1 Set of 3-items will be exchanged.
Although it is very expensive for a mere pin and a small part, it is important to replace it without being stingy, because a worn pin will ruin the feel of the RadialPump.
If the grease is used without it, the amount of grease will decrease very quickly, so it is important to lubricate the area with a large amount of grease.
If we talk about usable/unusable, it is usable Parts even if they are so reduced as to be elliptical, but that does not make sense to use RadialPump.
This is even more so with the Initial ModelRACINGMaster Cylinder, which eliminates flashy and generally popular features (superfluous functions) and pursues only LeverFeel.
View detail
Fits: YAMAHA Brembo P4.30|34 1PIN, YAMAHA P4 caliper, YAMAHA Brembo P4.30|34 1PIN, YAMAHA P4 caliper
Genuine Brembo Racing Pads for Brembo P4 caliper.
These were a purchase to find out just how well these pads actually perform during track days. I have had different branded race pads before but these are supposed to be the mutts nuts. Having heard a lot of good reviews, finding the correct part for my calipers was not hard at all. I cross referenced with Brembo website directly too. The price of these pads is not cheap but you do get what you pay for when it comes to Brembo and particularly, race pads. I did need a set of pads that could withstand a very high temp and these ones did not disappoint. I had a couple of other small items in my order too which made the shipping pretty reasonable. These pads are not the lightest but the smaller parts were kept nice and safe during transit with all the padding Webike added. The pads arrived safely and upon inspection, I was very surprised to find no dust or contaminants in the packets. They came in the standard Brembo pad packets as always. You know you are getting the real deal when they come in those packets. The pads fitted my calipers really easily, a little free space but just enough not to have to worry about. The pads performed superb during a spirited track day as Cadwell park in the UK. Probably too well if I'm honest as this is a short track anyway. I think the reason some peopel do not rate these pads is that they are not getting them hot enough, these really do need pushing to get the performance they are meant for. These will most definitely be on my list again. Very impressed. If you want some great pads that perform under great stress, get these. View detail
Fits: HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FAZER8, YAMAHA FAZER8, SUZUKI BANDIT1250, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI SV1000 S, SUZUKI KATANA
Replaced at the same time as bremboDisc Rotor
Replaced together with bremboDisc Rotor.
It stops cleanly and has no control issues.
However, when you put it on, you can't tell it's brembo by its appearance.
View detail
Fits: KAWASAKI H2R, KAWASAKI ZX 14 R, APRILIA RS 660, APRILIA RSV1000R, APRILIA RSV1000R Factory, APRILIA RSV4, APRILIA RSV4 APRC ABS, APRILIA RSV4 Factory, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA RSV4 RR, APRILIA Tuono, APRILIA Tuono R, APRILIA Tuono V4 1100 RR, APRILIA Tuono V4 Factory 1000, APRILIA Tuono V4 R, APRILIA Tuono V4 R 1000, APRILIA Tuono V4 RR 1100, BENELLI TNT Cafe, BENELLI TNT R160
Used in place of OEM.
I bought the OEM SC82 Brake Pads and they are very expensive. The thickness of the back plate is different from OEM, but I can't tell the difference.
I am satisfied with the normal use of the product.
They are sold cheaply on the Net, but fakes are also distributed.
I buy from this Site, which is an authorized distributor.
View detail
Fits: KAWASAKI H2R, KAWASAKI ZX 14 R, APRILIA RS 660, APRILIA RSV1000R, APRILIA RSV1000R Factory, APRILIA RSV4, APRILIA RSV4 APRC ABS, APRILIA RSV4 Factory, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA RSV4 RR, APRILIA Tuono, APRILIA Tuono R, APRILIA Tuono V4 1100 RR, APRILIA Tuono V4 Factory 1000, APRILIA Tuono V4 R, APRILIA Tuono V4 R 1000, APRILIA Tuono V4 RR 1100, BENELLI TNT Cafe, BENELLI TNT R160
It's a matter of life and that's why we have BREMBO.
I purchased this along with the Caliper replacement.
I was using an inexpensive pad to begin with, but one day, while riding around town, the car in front of me suddenly Braked just before a crosswalk,
I try hard to Brake back and forth without thinking of myself, but because of the inexpensive Pad, I stopped just short of almost bumping into it or not.
We didn't hit each other, but we were only about 50 cm away from the car in front of us. That's a Large change dangerous. That was a good opportunity for me to never save my life! With that in mind, I bought the brembo standard pad. it is OEM installed on M50M40 and other Calipers, so performance is not a problem at first, and since it is brembo, that is also a relief.
I installed it as soon as it arrived, and when I tried it on the road, I was amazed at the braking power, and I am sure I will be able to stop safely in any case.
View detail
Fits: Others , KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z1000, KAWASAKI 1400GTR, KAWASAKI 1400GTR, KAWASAKI ZX-6R, KAWASAKI ZX-6R
This is brembo!
I didn't like the OEMPad and switched to brembo.
The soft Touch shortens the braking distance and makes it easier to Control. It's a quintessential brembo!
View detail
Fits: HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FAZER8, YAMAHA FAZER8, SUZUKI BANDIT1250, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI SV1000 S, SUZUKI KATANA
Purchased with Rear disk rotor
I bought it together with brembo's rear disk rotor when I purchased it.
I haven't installed it yet, but I have no complaints about the quality and appearance of the product.
I will make an impression when I install it again.
View detail
Fits: HONDA ADV150, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA PCX HYBRID, HONDA PCX150ABS, HONDA PCX160, HONDA PCX, HONDA PCXe:HEV
Buy before and after
Since I was planning to go touring in the near future, I inspected the car in advance and checked mainly the consumable parts.
After checking, I found that there were almost no Brake Pads in both front and back, so I hurried to purchase them.
It was in stock and arrived immediately and in time for Touring.
And because it is made by brembo, the brake also works well. I used to use Red Pad, but when I changed to brembo this time, I decided to use brembo from now on because it is inexpensive but has good performance.
This product is for the front of CRF250.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CBR125R, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA GROM, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI Gixxer 150., HONDA CB150R, HONDA CB300R
Buy before and after
Since I was planning to go touring in the near future, I inspected the car in advance and checked mainly the consumable parts.
After checking, I found that there were almost no Brake Pads in both front and back, so I hurried to purchase them.
It was in stock and arrived immediately and in time for Touring.
And because it is made by brembo, the brake also works well. I used to use Red Pad, but when I changed to brembo this time, I decided to use brembo from now on because it is inexpensive but has good performance.
This product is for the rear of CRF250.
View detail