Reviews
Fit feel on par with OEMs
Thank you very much for the Chain tensioner. The installation is completed by Bolt On, but I adjusted the tensioner by overlapping the attached washers so that the chain would be more centered on the roller. In my case, I used all the washers to get the quantity:I was able to set it. I could not feel the running performance, but I think it is useful to reduce the flapping of the Chain. However, since the tension is not always applied by Spring, it is necessary to adjust the tension of the chain. Just a little... View detail
It worked.
Shift pedal no longer feels squishy laterally, and although the shift change is not drastic, I can now enter Snap and Smooth when entering from N to 1 at a stoplight.
Partial cutting of the OEMSprocket Cover was done using Leutor. It was not that difficult even for an amateur.
View detail
Improved Fee Ring
Kacchan." But Pushingja. FeeRing has improved as it feels like it has become a
I Dramatic Change." I didn't think so, but it might be different depending on the year and condition of the vehicle.
I think that the reduction of Stress in frequently operated parts will improve Motorcycle life.
My SR is a '94 model, so the Crank Case CoverReverse side needed to be modified.
If the model is from 2003 or later, the installation will be completed for only a little more than 6,000 yen, including the Collar Set option.
For MODEL after 02, it will cost around 10,000 yen to do irreversible processing on the Cover or an additional 10,000 yen.
(Sprocket Cover made by BORE ACE or OEMCover+Collar Set from '03 can also be used)
If it is a MODEL from 03 or later, you can put it on anyway.
View detail
one who cannot be undone
It's a completely invisible part, but once it's on, it's on.
Not removable. I mean, it's OEM.
I would like it to stay on. Shift by a lot.
ScauperScauper to enter
View detail
Relief
Chain flapping is considerably reduced, so
It is not conspicuous, but it is a relief to know it is there.
The picture is old Type, but if you buy it now.
The new Type here is good.
View detail
sr400 '83
I could feel it because it supports in the direction of rotation. View detail
YouTube from the instruction manual
The installation was quick and easy, as I had studied the installation beforehand on YouTube etc.
The way GEAR is entered is also much better than NORMAL.
I wonder if the separate color is $1,000 too expensive.
View detail
I can see the difference.
I recently installed it as a DIY project.
2017 RH-03J.
I used to have a lot of difficulty entering GEAR, but after installing this, I can enter ScauperScauper.
This may seem expensive at about 5,000 yen, but I think it is more than the price.
View detail
Do not enter Neutral in the middle of an intersection.
When shifting from 1st to 2nd gear while entering an intersection after starting off, the car sometimes goes into neutral and fumbles.
I introduced it to see if I could solve that.
I've only driven about 300 km, but I don't get upset anymore.
Worth introducing.
View detail
Expensive Parts, but it's Recommends
This is a pre-run impression of the SR4005 after running it for 300?
(This is a combination of the NORMAL Handlebar and Seat.
(Body size:175?, 70 kg).
It is easy to hold the tank and
The posture of the bike is stabilized when tipping and cornering.
Shift feeling is good, and you can make a pleasant Shift change.
It is also attractive because of its high processing accuracy, high quality and high quality feel.
What I'm concerned about
The brakes are a little less tight.
The range of adjustment of the pedal is limited.
I suppose it's a matter of taste, but even if you want to lower the position you step into
It was impossible because it interfered with the Exhaust System.
With the change in position.
I needed to take care of my buttocks pain.
The precautions for wearing it are
Loosen the Chain.
? Remove the anti-vibration Rubber first, then remove the Footpeg Plate.
Pulling with Pliers and Silicon Spray
It will come off if it's slippery. 。
If you're thinking about Rear Sets on the STD Handlebar, you can use
Recommendation in a good position.
View detail
It makes it easier to shift
I was a little reluctant to use Shift because of the old model, but after I installed this product, it's been a little tougher Chica Chi is now entering It's an inconspicuous part, but I highly recommend it View detail
It's very good
It's not cheap in terms of cost, since a separate collar is required for installation, but the effect is tremendous
The GEAR goes in very well, and the clunking and solid gear that you don't get when you're NORMAL It can be changed
If it works so well, I think it's a good buy, not cheap, but not expensive either
Because it is hidden by the Cover, it is not the Parts that you can see if it is attached, but it is the most manipulated It's great to be comfortable with the part
I had a motorcycle shop install it for me
The motorcycle shop where I test rode the bike said it was good! He said, "This is good!
View detail
That makes sense
I found out about a manufacturer called Boa Ace when I bought the Twin oil line! It was
Next up is the Heat Radiation Fin for Oil tankDown tube, which is not yet listed Order by
Then there's this Change Accent
My SR is what's called OEMRear Sets, but fortunately the Shift feeling is not so bad I didn't think there was any Yet, when I actually used this, it was subtly better
Because it's an '88 SR, when you install it, you need to use the Sprocket Cover and Shift A partial excision of the shaftBoots is required, but it is not too difficult
As many have written, it's a well-done Partz
View detail
It doesn't look like it, but it's working very well
I installed it on my 2017 FI 。 The rubber of the change shaft is cut and installed, the attached Aluminum Collar was also installed on the outside of the Change Accent The problem is the Drive gearCover installation with the Rubber in the Bolt hole under the Left and the Bolt hole under the Left I was able to install it perfectly with the color cut As for the actual driving experience, I've been told that it's easier to get into the NRange from Downshift I think View detail
It is a necessity to attach Meter to the company's Top Bridge
When installing in the same position as the OEM, it becomes installation with one Bolt. There are types of OEM's anti-shake rubbers and those of Rigid mount. I think that the former is better for Tune SR in particular because it is a strong motorcycle.
Do not forget the Screw lock!
View detail
I installed it in the 2004 model SR 400.
I purchased it with Exclusive Collar for the above-mentioned year formula.
Sprocket cover Body is unprocessed, but it disconnects Rubber Bush and removes it and replaces it with Color, so irreversible processing is somewhat necessary.
The installation itself is easy, but because the handling explanation is insufficient it got slightly lost.
I can feel that the Touch of Shift change after installation has changed, but it was not such a drastic change.
I think that it is effective for vehicles that are pretending to be Shift in old age and vehicles of Rear Sets.
Moreover, I think that it is possible to expect to some extent the effect of reducing the load from the change lever from the principle and preventing play from coming in the future.
In the case of a relatively new year type vehicle with Normal step, if I feel difficult to enter GEAR, I think I should replace the engine oil first.
Regarding price, I think that it would be inappropriate if I think about making it, but since it is simple, I thought it would be a little cheaper.
View detail
Mind?
After installing Shift change I feel like I got to be able to feel good Chica Chi.
It may be due to mind.
Since processing of Sprocket cover was troublesome, I bought Accent Mounting Collar Set at the same time and attached the Sprocket cover after 2003 with Yahoo auction installed.
I wish I had been a little cheaper.
View detail
Change Accent installation
Attach topics parts even during SR riding.
As a structure, by adding support part of Shift shaft
Suppress Shaft's movement by Shift Pedal operation,
Items to make it easy to change.
As an impression actually used, a good place.
- Shift operation's Touch got better. Especially during downshift.
bad place.
Additional work on Cover is required.
It is necessary for a person, but it is recommended for those who can not convince Shift touch.
View detail
Although the effect could be felt sure, it did not feel until word-of-mouth communication changed more dramatically. However, I think whether it is certain that it is a Smooth.
Although the effect could be felt sure, it did not feel until word-of-mouth communication changed more dramatically. However, I think whether it is certain that it is a Smooth. View detail
Although an authentic positive one was removed and the thing of the other company was attached, since it was too poor, it carried out here. a price -- although it is high -- quality -- it is high. It will be recommended, if when it comes to exchan
Although an authentic positive one was removed and the thing of the other company was attached, since it was too poor, it carried out here.
a price -- although it is high -- quality -- it is high.
It will be recommended, if when it comes to exchange there is an opportunity to exchange since it is somewhat troublesome.
View detail