Reviews
Fits: YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA XSR700, YAMAHA MT-09 SP, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
For Repair
Purchased because I broke the Rear blinker by so-called cold cocking it.
CB400 NC39 SPEC1? OEM discontinued.
I thought about using a reproduct, but the bulb rating was low and I thought it would be a high flasher. If so, I decided to use LEDs.
Smaller than OEM, so Posh's 40mm extension was used for installation.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
LED Blinker
It is a little expensive, but I am satisfied with the shape and stylishness. View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
YamahaOEMBlinker
The look is Carbon Style and cool, and the brightness is bright and perfect. View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Installed on SEA BASS Motorcycle.
[How is it used?
The design of the OEM blinker of the GSX-S1000F was not to my liking, and while searching for a blinker with a better design on Webike, I found an LED blinker with the design I liked in Yamaha's Option product. I found an LEDBlinker of my favorite design in Yamaha's Option product, so I bought it.
I am now going around and using it on my SV650X.
Was the one you received as per Image?
Today, LED blinkers of various designs are available from various companies, but at that time, LED blinkers were just starting to be released by ThirdParty, Parenthesis is good!" The price of Blinker, which seems to be a good idea, was still too high to be easily replaced.
In such a situation, this product is for one unit (4 Blinkers). If you work hard, you can reach it." When I learned from Webike that it was available in my price range, I did not hesitate to purchase it, and it is just as Image described.
Was the installation difficult?
This time it was included in the package. Resistance is not used, but rather an LED-compatible ICRelay made by DRC.
Essentially, one resistor is attached to one BlinkerWiring and connected to the Wiring on the car body side.
Cowl removal and installation rather than installation of this product. "Getting there and after installation." work was tedious.
Once the exterior has been removed, the only thing left to do is to remove the OMBlinker and replace it with the product, and then use a different manufacturer's product. Cowl mounting collars will be almost complete.
The Wiring connections are "Bullet Type Terminal So, if you replace it with the OEM TypeCoupler for each manufacturer sold at KITACOConvenienceParts or Poshetc., you can have the same beautiful Wiring process as OEM.
How was your experience with it?
As expected of a Yamaha OEM option product, we are very satisfied with the CoolDesign, which is neither conspicuous nor causes deterioration of visibility.
[Included Parts:were they on?
Quantity of 2 BlinkerBodies and 2 resistors to be attached to each:Set, 2Quantity of this product for 1Large vehicle.:You need to purchase Set.
[Was there anything that disappointed you?
No complaints, high quality, and if you like the design, you will love it.
Other items that would be helpful
Point and hang of installation
By Vehicle or Manufacturer Blinker mounting collars. can be purchased separately for uncomfortable installation similar to that of the OEMBlinker.
[Availability and clarity of the Instruction Manual
There is an Instruction Manual, and although the level of difficulty is a little higher for those who are not good at electrical work, it is manageable if you read the Instruction Manual carefully.
[Notes]
If the OEM has a vehicle with LED Blinker, the included resistors and LED-compatible ICRelay are not required.
[ITEMS TO BUY TOGETHER
For vehicles that have a Large threaded hole when removing the OEMBlinker, it is recommended that the vehicle be fitted with the appropriate Blinker mounting collars. if you want to do a Beauty Wiring process like the OEM state. OEM TypeCoupler by Manufacturer If you don't want to install resistors on each Blinker, you can use the LED-enabled ICRelay separately.
[Opinions and requests to Manufacturer
I like the design, so it would be great if you could change the model to a more modern style of LEDs where you can't see the grains of LED bulbs while keeping the same exterior shape.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
MT-09 YamahaEuropeLED Flasher
I was looking for an LED Blinker that is not too small, as the MT-09 (2017MODEL) Blinker is not a standard LED. I also didn't like the OEM mounting position, so I tried to change the position as well.
The Front was changed to the position next to the Meter, and the Rear was changed to the License Plate, giving it a cleaner appearance.
The YamahaEuropeBlinker is not plugged into the OEMCoupler (gibo), so it takes a bit of work, but it is not too much trouble.
Design, I have no complaints about the light level.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Yamaha Europe LED Turn Signals
Item came surprisingly fast and packed nicely. Wish it came with the signal light adaptors but looking forward to install them! View detail
Fits: YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA XSR700, YAMAHA MT-09 SP, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
YAMAHA Europe YamahaEurope LED Blinker
LED-like shape and OEM that Valve can't do? (I assume there is some reason why Yamaha is treated as if it were Yamaha Europe and not Yamaha HQ, but …) So we chose it because the quality would be good.
So far, I have had no problems and am satisfied with the use of the product.
View detail
Fits: YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA XSR700, YAMAHA MT-09 SP, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Very nice Design despite OEMOption
[How is it used?
Replaces OEMs
Was the installation difficult?
If you are not good at this, you may want to ask the Shop to do it for you.
The Front is easier to install, while the Rear requires some work to remove the Rose shi and wiring.
It will take some time.
Recommend changing One Side at a time.
When it is completely removed, it is difficult to tell which angle it is.
If the One Side remains, it can be adjusted to that side.
The resistance attached to the bike is too large, which is hard to use on a motorcycle with no clearance like MT-09.
Therefore, the supplied resistor was not used, and the Large original Relay was replaced with an LED-compatible one.
How was your experience with it?
The replacement is worthwhile because it changes the appearance considerably.
And it is quite bright.
[Included Parts:were they on?
resistance
[Was there anything that disappointed you?
Large resistance, long wiring time (for Universal, it can't be helped)
The price is high.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Yamaha products are still the best.
I searched for the best one made by Yamaha and bought it because the OEMBlinker of the Racer 900GT is Bulb Type nowadays.
Wiring modification is required for installation, but the Relay does not need to be replaced, just insert the included resistor in the middle.
Visibility seems to be better than OEM and it is more visible to other vehicles.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Cool, I feel safe!
Since the existing Blinker does not meet the vehicle inspection
I was looking for Other Brand Product, but there are many products that are faulty and I was looking for which one is the best.
The connection is a Bullet Terminal connection, so it can be purchased as if it were a Universal Product.
Moreover, the product is a manufacturer's product, so I could use it with peace of mind.
Vivoshi terminals, terminal covers, etc. are also included.
If you have the tools, I think you can install it without any problems.
Many of them have been
Many of you had concerns about the heat generated by the Ceramic resistors.
The Ceramic resistor is protected by Heat Insulating Material, so it may not be so much of a problem.
The Instruction Manual contains a
Ceramic resistance gets hot after prolonged use of the Blinker." It is noted that.
Highly recommend it, even to non-YAMAHA people!!!
View detail
Fits: YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA XSR700, YAMAHA MT-09 SP, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
As expected quality
It was a good deal because all the Wiccan Base, resistors etc. were included from the beginning.
It is a little troublesome because the wiring needs to be machined, but as long as you have the tools, it's not much of a problem.
View detail
Fits: YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA XSR700, YAMAHA MT-09 SP, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
as expected (as opposed to expected)
Stylish looking, yet very bright with LEDs.
Installation itself was easy and SPIDI was able to do it.
If I wanted to, I'd say that the Parts that YAMAHA's Manufacturer is putting out. I would have preferred to use the Coupler instead of the Bullet Terminal to take it off and on.
But it was a good Parts, as expected.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Yamaha Europe LED Blinker
Excellent product and quality. LED blinker is bright amber in color which passed the CE marking. Recommended product and easy to install. View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
It's so bright
As shown in other people's imprints, Small Type, Design, highly textured and stylish It is
Installation dealt with the Blinker relay for LED without using the attached resistance
What I'm a little concerned about is this Blinker, it's very bright when it glows
It's so bright that you'd think the car in front of you would be a nuisance
Very good product, except that the price is quite high
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
SMART
It's not too small, but it's not too large, so I'm satisfied with it
I used an LEDRelay and did not use a resistor
I wanted the OEMCoupler on it rather than the resistance
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Yamaha LED Turn Signals
Turn Signals are very bright and noticeable. Easy installation on my 2019 Yamaha MT 07. Great product and great customer service by WeBike! View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Large changeable satisfaction
There is only the option of EuropeYamaha OPTION, build, change to Large in design.
Also, easy to understand manual Electric Works Pliers Others are attached to terminals, in Hemp palmkk,
Besides, when exchanging with LED Blinker, it was easy to complete if you can crimp the terminal even with the Electric Works Pliers instead of the mandatory Relay instead of the Cement resistor.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
StylishJapanese Vehicle Inspection Correspondence
There is only OEMOption and outstanding reliability
The price is high but I think that buying when thinking about reliability
However, it is not Extra Processing Not Required, so be careful
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
LED Blinker
I bought STD Blinker because it is interesting that it is very large. Installation required somewhat Wiring processing.
Also, because the storage of Register was Large strange, we recommend purchasing LED Corresponding Blinker Relay.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
No complaints about Design and quality!
LEDRear blinker vibrates etc. I reached the end of its life, so I tried to divert this product.
YamahaOEM Product (Option treated) Although it is Sharp shape, design is also high, there is also a sense of security in terms of performance.
Since installation is the same as after Universal Product, it can be diverted to any Motorcycle.
Light intensity is as expected and safe as it is without complaint.
I should change Front to this product (Lol)
View detail