Reviews
A-TECH's Core guard is Parenthesis good!
Little Quantity to fit the Radiator type:Pair (for Left and Right) Just angle it and replace it with 4 Bolt.
It prevents stepping stones and looks good Parenthesis!
I personally like A-TECH's Mark very much!
It was the right choice for A-TECH!
View detail
Mast Custom
I don't like anything with the Manufacturer logo, so I went with this one.
Just by removing and re-fitting the screws, even a beginner can install them, and putting them on is the first step to making Motorcycle a Large Thing.
View detail
Good Accent
The OEM Core guard was painted about 2 years ago, but the paint didn't last long because the rust was not removed properly and the surface preparation was not good enough. I thought about repainting it, but I thought it would rust again after a while, so I decided to replace it.
At first, I was thinking of Plain ones without Logoetc., but I chose A-TECH because of its low price.
Regarding the product, although it was unexpectedly thin, the finish was good and favorable. The precision was good and the mounting holes were Exactly. It is also finer than OEM, so it will be more effective in protecting the Radiator. I was concerned about the chatter sound, so I thought about using the anti-vibration material that came with the product, but the upper hook is folded back to the point where the core guard is effectively attached to the radiator. However, the upper Hook was folded back so that the Core guard was almost stuck to the Radiator, and the attached anti-vibration material did not seem to fit in the almost no gap. I ran a test run and did not feel any chattering sound, so I decided to use it as it was. Then, in the Instruction Manual, it says [Color] It says to clear paint it, but I'm thinking of using it as is for the time being, and then doing it together when I have a chance to paint something else.
I thought it would be better without the logo, but when I installed it, I feel that A-TECH's logo is a good accent. I guess there are people who like this kind of thing, but for me, I like it.
View detail
I installed it on my GSX-S1000.
It was said to be for New Model KATANA, but we installed it on our GSX-S1000. Since it was the same engine, I thought it would be large and strong, so I bought it. I was able to install it without any problem as expected. I went to Two-Ring right away and the heat went up a little, but I don't think it's a problem. The design is simple and I like it. View detail
The packaging ruins it.
The product is very good, but... I fixed it and installed it, but it's a little wavy... A-Tech, I'm not returning it because you made it for me! The thing is really nice! I really like it....but you, the shipping guy, were very rude to A-Tech....you don't know how to ride a motorcycle. It was easy to install and even came with anti-vibration rubbers. View detail
It's one of the cheaper Other Brand Products!
Used for CB400SF 2016
It can be installed without any problem. Small Size Spanner or MONKEY is required for assembly.
In the Instruction Manual, it was written that the Amiami part is supposed to be painted.
I assembled it without painting because it was troublesome, but originally it was [Color] It seems to be better to paint with Clearetc.
I will paint it when the rust starts to show.
Now I'm wondering to what extent the Carbon part will keep clean.
[Color] Clear painted carbon parts, but I'm worried about deterioration by sunburn and heat.
You can also buy a Guard made by another company for a few thousand yen difference, so you may decide on the Wallet and Design!
View detail
If you think of Radiator core guard, this is it.
few in number of items (I guess it's too old for that.) The A-TECH star is cool! (FLUSH Gordon-like.)
Quantity:Pair (for Left and Right) The X4 has a glossy Carbon Style design which is also a nice touch, except for the Mark, which is a mesh and has no problem with ventilation.
It also comes with an A-TECH sticker. (I'm not wearing it.)
Installation is easy - just remove the OEM Product and close it with the Hexagon Nut.
View detail
Large satisfied
Installed on ZrX1200 DAEG
Even as an amateur, I was able to install it in less than 30 minutes
I ran it after it was installed
No scare noises, no problems
The best part is that it looks good in Parenthesis
View detail
Just like the image!
The quality and feel are both as good as Image!
Since it was a gel coating, we repeated water polishing after painting with Urethane Clear!
However, I feel that the price is a bit high
View detail
Cassively without Dress-up without overly claiming
Purchase Dry carbon twill type. The difference between NORMALCarbon and Dry carbon was not understood from HP of Manufacturer, but we made arrangements with Manufacturer in advance, but we immediately responded and was able to check the contents of the product. Radiator hood cover of MODEL 's DAEG in 2015 was a slightly flashy impression with a Plating part, but it was satisfying because it got a calm impression by wearing. [Color] Clear paint finish is also beautiful.
However, I had some difficulty in wearing it. The hole on the bottom side of the Hood was slightly smaller than the protruding part of the coupling part with the Radiator, and it was necessary to finely adjust the tuning by scraping by the File little by little, and so on.
The price is slightly high impression, but the atmosphere of my car is finished to my liking Large I'm strangely satisfied.
View detail
Good
The pieces are very well finished but not really adapted to OEM. I finally managed to install them but not so easily. Next time I will know but it is a bit disappointing. View detail
For Radiator protection
I installed it in NINJA 1000 made in 2016.
To prevent deformation of Radiator's fins, I bought it.
Installation was possible without removing Cowl. Just hook the top claw and fix it with Bolt. I liked Design and I bought it, but since Ninja has Cowl, I can hardly see it from the outside..
When I installed it, Radiator and Core guard did not partly fit and the gap was empty. Cushion wood was also enclosed, but I did not use it especially because there was no beating noise during running, but I was a little worried. When installing, I think that if you deform a little even a little gaps will be available.
View detail
Radiator core guard installation
OEM made rust due to peeling off of coat film made of iron and purchased including Maintenance. The reason for purchasing A-TECH was decided by shape with Brand.
In installation, we attached Sound-absorbing Mat for preventing Chatter sound to Center in four directions.
After exchanging it is a good feeling to shut up with Logo mark!
View detail
13 years installed in SC59 Repsol
Installation requires minimum removal of One Side Cowl.
If it is troublesome and you work without removing it, the Radiator will be full of scratches. Fitting, such as dimensions, is perfect.
View detail
Without Logo RType.
Material is Stainless Steel, but for the Instruction Manual "Painting is a prerequisite" There is a notation with.
I think that most people use it as it is in Unpainting.
Thickness, MachiningCut, Material, Design, None are beautiful.
Design has Logo, preferences can be separated without logo, but I chose R without logo as a dare.
Cut part with Logo and Cut part without Logo are probably the same Design (Same Cut size) I think, "Well, well, if this size is Small, Small stone... It was one of the reasons I chose R.
Although there may be a slight cooling effect drop by that amount, because it is Hokkaido... I believe.
Although it is without logo, the resin Seal of Manufacturer logo is affixed to the bottom of the product, but since it was slightly floating, I will make 4 stars.
View detail
It was worrisome when straddling its own car.The Radiator cover was seen at the time the waiting for the signal, and unexpected.Probably, it is the action which misunderstands the Plating instinctively with a Mirror.After changing to Colet, there ar
It was worrisome when straddling its own car.The Radiator cover was seen at the time the waiting for the signal, and unexpected.Probably, it is the action which misunderstands the
Plating instinctively with a Mirror.After changing to Colet, there are also no such worries.He is not fascinated.
The person of a thought needs to notice with an ant whether the effect of such a viewpoint is also a simple Dress-up parts. attachment has no necessity of worrying.It OKs in 3 minutes!
Kana merely expensive considering a size or material?
View detail
Since structure is also good and attachment is also dramatically easy, it is satisfied. -- a Neck is a price too -- -- serving also as a Dress-up up, since it is the price which other Manufacturers also merely resembled -- -- may you
Since structure is also good and attachment is also dramatically easy, it is satisfied.
-- a Neck is a price too --
-- serving also as a Dress-up up, since it is the price which other Manufacturers also merely resembled --
-- may you choose by a favorite Logo etc.?
View detail
It equipped with the HORNET in order to prevent bounding since the cooling capability is comparatively low, and damaging a Radiator with a stone or dirt, and a cooling capability getting worse further. It is thought that a wearing feeling does not n
It equipped with the HORNET in order to prevent bounding since the cooling capability is comparatively low, and damaging a Radiator with a stone or dirt, and a cooling capability getting worse further.
It is thought that a wearing feeling does not not much spoil appearance well with the Guard of thin mesh state, either.
Since it is an original manufacturer's product again, there is no shakiness after attachment and it is being fixed firmly.
Although it is somewhat comparatively high-priced goods, I think that it is a very well important Items.
View detail
[Webike Monitor] Before , if structure is bad and is looking for the thing in the home manufacturer which can be diverted although it had purchased and equipped with the overseas Core guard, the object for product Ninjamade from A-TECH400 purchased th
[Webike Monitor] Before
, if structure is bad and is looking for the thing in the home manufacturer which can be diverted although it had purchased and equipped with the overseas Core guard, the object for product Ninjamade from A-TECH400 purchased this time will be discovered! Since form is similar, it purchases for the time being.
When equipped, it has equipped frankly in unprocessed and a Bolt on.
I also satisfied structure very much well.
Wearing vehicles are 2009 model VERSYSs 650.
View detail
[Webike Monitor] It is buying a Core guard, since a Damage's will probably be serious and a repair charge's also costs dearly if the pebble ? is bounded and it hits a Direct while running in OOO kilo truly, washing the ZRX1200 DAEG. The reason said i
[Webike Monitor] It is buying a Core guard, since a Damage's will probably be serious and a repair charge's also costs dearly if the pebble ? is bounded and it hits a Direct while running in OOO kilo truly, washing the
ZRX1200 DAEG.
The reason said in the thing whose practicality it is simple and is high chose this model of the A-TECH.
Attachment is very easy, and it only removes and attaches the Screw of a Radiator guard, a Stay, and the upper part of a Radiator.
When two fixing positions of the upper part of a Core-guard main part were outside lay to a slight degree (merely 2 or 3 mm), the Just size was worrisome for a while
, however here.
Moreover, I consider that it is more practical to attach a tabular rubber cushion thinner than an attached crevice Tape.
Since a Chatter comes out a little per 3 and 000 rotation in my case, it will be Good if this is corrected.
View detail