Reviews
A tech under cowl
I ordered this for my 2023 z125. It fits perfectly. Really makes it stand out from the stock look. Love the product. Highly recommend to anyone that's interested. View detail
Nice touch - but problems for yourself
Installation is a nightmare. You have to remove your whole tail assembly except you subframe. The new undertray comes with battery slot, but misses some of the grooves required to route wire harness. Putting back the tank had challenges. Fitment is ok. View detail
Nice touch
Fit was good. Atech gave ample cushion strips. Use abundantly to avoid vibration. Installation requires the removal of the OEM tail pieces. 1hr job max. View detail
The design and shape are good, but the gap for the tank pad is unavoidable.
The design and shape are good, but the gap for the tank pad is unavoidable. Although I purchased the product with an understanding of this gap, it bothers me a little. View detail
Increased windshield effectiveness.
I purchased this product for the purpose of reducing wind effects when driving at high speeds.
OVER Separate Handlebars interfere with the Throttle Cable and the Tank of the Master Cylinder.
Handlebar is installed back to OEM (without Spacer).
Well nuts (C-440) are used to join the Base and Screen sections.
The experience of installation is that the posture is shallower than OEM, where the benefit of drag reduction is achieved.
The effect is not that noticeable in the normal posture, but the reduction was noticeable in the sticky prone position.
About the appearance (FRP Black, [Color] (Select Option in Clear)
The Luster feel is good, but as you can see from the light reflection in the Base area in the photo, the surface preparation is a bit lax.
if you are concerned about [Color] It is best to purchase without Clear and paint after priming.
The Screen section is not distorted in any strange way, and it is nice to know that this is also available as a Single Body.
It seems to be #Made-to-Order, so the delivery time may take a couple of months.
View detail
It finally arrived!
Made-to-Order, 6-month delivery
Thank you for keeping the mold even though it is an old car!
Excitedly choose Twill Weave Carbon
Hole Gap and some distortion are expected.
Above all, Real Carbon's glossy finish is beautiful.
Left Side requires oil cooler hose clearance modification
View detail
The texture of Carbon is beautiful!
I bought the NINJA2 Helmet 50R for Gymkhana from a friend to cover up the scratches on my tank, but I was pleasantly surprised! The carbon texture is so beautiful that I can't help but look at it when I'm waiting at a traffic light …! It is hang to degrease properly in order to fix it! The carbon texture at such a low price! It is the best! View detail
Took a while but it’s perfect. Has the flared opening making it a true upgrade over stock. Very cool
Really nice piece. Flared mouth so it is an actual upgrade. Might add some more urethane to smooth the transition from CF to plastic insert View detail
Purchased as a spare
The last one I purchased was quite scratched and worn, so I repurchased it as a spare. This time it is twill weave.
We initially waited 8 months but received it in 6 months.
After all, delivery time for carbon parts is usually around 6 months...,
View detail
It's really just a dress-up.
As Title
When I get on it, it's the first range I see when I look at Meter or something.
It is a Recommendation for Carbon lovers.
I'm not sure about the installation, as I left it to the store for inspection Timing,
BOLDOR 2009.
View detail
Exactly
No processing and It is easy to install...BALIetc. was not at all. View detail
No problems with compatibility, no complaints if Screws and Nuts are included!
The OEM inner cowl was damaged and I had to replace it (the front of the knee was broken when I straddled the cowl). Meter Material:Carbon Style and the look and feel of the product may be more like a Match than an OEM. View detail
A-tech single seat cowl&seat
Received my single seat cowl and seat today and I'm very impressed with the quality of the items,I've offered the cowl up the the bike and the paint is a good match, the only reason it's not getting 5 stars is the time between buying and receiving the item. View detail
It's somewhat within sight.
It would be nice to change the look for those who have been on it for a long time.
I left the installation to the store.
It's an easy dress-up.
Is this what the price is? I think so.
2009 BOLDOR.
View detail
RearTank Guard for cbr1000rr but can also be used for cbr600rr!
This is my first purchase of a~tech products and I think the quality is good.
I had removed the tandem footpeg and installed a single seat cowl, but the rear brakes tank was exposed and I felt something was not right!
When I put it on, I was satisfied without complaint!
If anyone is having the same problem as I am with the exposure of the Rear brakes tank with the Tandem Footpeg removed, this is a RECOMMENDATION.
By the way, the model of cbr600rr is 2bl-pc40.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Product quality is the worst Level
After 5 months of ordering, it finally arrived and when I carefully unpacked it, it was covered in scratches. I am so disappointed. Don't they inspect the product before packing it.... It is a regrettable Manufacturer. I can't recommend them at all. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3
Higher than OEM.
[How is it used?
Circuit&Pass
Was the one you received as per Image?
Yes
Was the installation difficult?
It is essential to correct the holes.
How was your experience with it?
The behavior is conveyed better than OEM.
View detail
x-mark (used to indicate an incorrect answer in a test, etc.)
[How is it used?
The VTR1000SP-2 I purchased from an acquaintance had been converted to a single seat, and although it had a lid, it was screwed on.
Was the one you received as per Image?
It includes a pedestal, a Rivet, and a Fastener.
How was your experience with it?
It did not go on easily, as I had to remove the aluminum plate on the back, but I was able to install it. I am satisfied with the large size, as I can quickly remove the seat cover by turning it half a turn or so.
[Included Parts:were they on?
Set of Contents as per product description:Male, Washer, Female. It comes with Rivet.
[Was there anything that disappointed you?
Nothing in particular. I am very satisfied. It looks very Race ish.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
You need a Riveter and a Drill.
Hand Riveter (SK11:SK11:https://www.webike.net/sd/23113093/)
Drill (KYOCERA_RYOBI:Kyo Sera_Ryobi:https://www.webike.net/sd/24632495/)
View detail
Quite a sense of Upgrading!
The installation required removing the rear of the Exhaust System, but either way, the ScrewQuantity:The work was only increased by 2pcs, so it took less than 30 minutes.
The appearance of the upgrade is great, the feel with the tire is even, and the precision is perfect.
Basically, we will not run in the rain, but we will consider installing a Fender Eliminator depending on how far we can prevent Tunnel and other springs from splashing up.
View detail
Lots of interference.
Purchased to prevent stains rather than to receive Oil.
Material:It is made of FRP and weighs 580g.
As is, there are no nests or hickeys, but there are many Small scratches and scuffs, so it is painted.
Lightly polished with #1000, sprayed with a buffing compound, and painted with 2-component urethane.
Cut because it interferes with Bracket and Hose near Side Stand, although it is not mentioned in other reviews.
Cut because it interferes with the IndonesiaFull Exhaust System that is being installed.
It was difficult because there were many parts to cut and a lot of cutting.
Prepare cutting and cutting tools for those who purchase them, as they are difficult to use with manual tools.
View detail