【YAMAHA OEM Motorcycle parts】Tail Lamp Unit Assembly 3HT-84710-10 Review
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
I realized once again that SR is an old car.
I used to like Cafe racer, British car Custom, and Material:I had been putting on FRPLucas type lamps as if they were my own righteousness, but I dared to go back to OEM Tail Lamps because I thought the design of NORMALSR400 had many elements of Motorcycle that I like.
The reason. Practicality." When The "look It is divided into
〜tilde Practicality." 〜tilde
★ [Motorcycle Tail Lamp
The primary purpose of a tail lamp on a motorcycle is to let the following vehicle know that the vehicle is moving. 。 Lamps also provide an indication of the distance to be measured by following vehicles. 。 The Brake light is activated in conjunction with the Brake applied by MotorcycleRider. 。 It is used to notify people that the vehicle is decelerating and also to let them know that the vehicle is stopped.
★ Tail Lamp Safety Standards
The color of the light should be red. 。 The light source must be visible at night from a distance of 300 m behind it, and the light source must be 5 W or more but less than 30 W. The large size of the lighting area must be 15 cm2 or more. 。 The irradiated beam shall not obstruct other traffic. 。 The tail light shall not have a damaged luminaire or severely defaced Lens surface.
★ [Reflector
Motorcycle Reflector (Rear Reflector) is a familiar name for bicycles. Red Reflector." means 。 In Motorcycle, it is mounted on the Rear 。 If the Engine Displacement Volume exceeds 250cc, it is possible that the vehicle will not pass inspection unless the Reflector is properly installed.
Even in cars, Tail Lamps are required by Article 52 of the Road Traffic Law to be lit at night! 。
OEMTail Lamps are also equipped with a reflector to meet safety standards. [Color] Clear, and more vibration-resistant and durable than FRP and other materials. →s recommendation.
〜tilde The "look 〜tilde
The SR400's Tail Lamp is square and large in shape, and has hardly changed since its birth in 1978. The basic design was made in the 70's.
In other words, → it's mostly old cars.
In the 70's, they are the same generation as the Yong Four, XS-1, GS, and so on. The shape is also similar to Motorcycle Tail Lamps around here (lol).
→As a person who admires old cars and old cars without doing anything, I'm just an ant (laughs).
I decided on the OEMTail Lamp because it meets security standards and can be customized to my own style.
【good point】
◎No need to worry about vehicle inspections. Vehicle inspections will pass.
◎70's Motorcycle atmosphere, combined with OEMPlating fender, it's like an old car☆.
◎Reflector can be attached, so it is easy to be recognized by following vehicles when driving at night or in Tunneletc.
◎
[Bad point] ??
◎ Some people are wild.
◎Steel is prone to rust.
I like it. I'm not sure what I'm talking about here. However, I can say that any Tail Lamp should be installed that meets the safety standards.