- Home
- Product reviews
- Motorcycle Parts
- Exhausts
- Chambers
- The Chamber is easy to use.... (RS Yokota: NSR80 Street Racing Club Steel Hand-rolled Exhaust Chamber)
【RS Yokota】NSR80 Street Racing Club Steel Hand-rolled Exhaust Chamber Review
Fits: HONDA NSR80
The Chamber is easy to use.
[How is it used?
I purchased this product during the Restore of an NSR80 that was given to me by a friend a long time ago.
Normal muffler at time of transfer (Chamber?) was damaged, so the price was low at that time.:Stainless SteelChamber was installed, but Material:I did not like the high-frequency sound with the peculiar muddiness of Stainless Steel, so I decided to purchase this product.
By Webike. NSR80 I searched on the "RSYokota" website and found a RSYokota from the heyday of the 2nd Mini bike 30 years ago from among the Chamber, which is less common than the NSR50, so I waited for its arrival with a sense of nostalgia.
How did you like it?
So-called "Chamber on the Street." However, if the air cleaner is not changed from the OEM one, the air cleaner will be stifled at low and mid speeds from the beginning of the run.
Webike's product introduction section.
The Power band emphasizes torque and acceleration in the 7500 to 11500 rpm range.
After installing the chamber, please try to set the Sprocket Gear to NORMAL or as close to NORMAL as possible to get the expected performance from 1st to 6th gear.
Carburetor setting is not particularly necessary, but when running at high speeds, it is better to raise the heat value of the Plug to about 9."
The OEMAir cleaner box was removed and replaced with a Power Filter, and the main jet was turned up about 10 and the plug was also turned up to No. 9 as an insurance measure.
In this state "Pon attachment" The Engine turns energetically from mid-range to high rpm when compared to the
How did it compare to other products?
The comparison is with a certain Manufacturer's Material mentioned above.:The output characteristic has become a little lower RPM and it is definitely easier to use for city driving. It is faster than Chamber before the replacement of the high rpm output type.
Personally, the most important point is the iron Chamber. "sound" The goodness of the
Stainless steel is a hard material that picks up all the vibrations and other noises, which can be harsh to the ear. The steel chamber, on the other hand, has just the right amount of flexibility to absorb any unwanted noise, resulting in a mild and pleasant exhaust sound. (individual differences exist) 。
[Points to note]
As I mentioned above, if the OEMAir cleaner&Filter is installed as it is, the low to mid RPM range will be stifled and Response will be poor and Stress will build up.
Vehicle condition and elevation (atmospheric pressure) Carburetor Setting will vary depending on the individual purchaser, and each individual purchaser should explore the best Setting.
Other items that would be helpful
The deciding factor in the purchase
He has been making a name for himself in the mini bike racing community for 30 years. RSYokota Brand power of the
The price is relatively reasonable for RSYokota's product lineup.
The fact that it is made of steel, led to this purchase.
[How is it used?
It's an older vehicle, so it's basically Dynamic Preservation. State, so. "Let's win the Race!" And XXXCourse Fastest!" It is not a problem if it is easy to drive in the city.
【Included Parts:presence or absence】.
Chamber&Silencer, Silencer band for body fastening and simple installationInstruction Manual (including Setting) is included in the package.
[ITEMS TO BUY TOGETHER
Replace the various jets for setting Carburetor, Power Filter, Funneletc. and, incidentally, Plug.
Opinions and requests to Manufacturer.
The number of vehicles in existence is decreasing year by year, but we hope that you will continue the lineup as long as possible.
ห้องนี้ใช้งานง่าย
[มันใช้ยังไง?
ฉันซื้อผลิตภัณฑ์นี้ระหว่างการเรียกคืน NSR80 ที่เพื่อนมอบให้ฉันเมื่อนานมาแล้ว
ท่อไอเสียธรรมดาตอนขนย้าย (Chamber?) ได้รับความเสียหาย ดังนั้นราคาจึงต่ำในเวลานั้น.:Stainless SteelChamber ได้รับการติดตั้งแล้ว แต่วัสดุ: ฉันไม่ชอบเสียงความถี่สูงที่มีความขุ่นแปลกๆ ของ Stainless Steel ดังนั้นฉันจึง ตัดสินใจซื้อผลิตภัณฑ์นี้
โดย วีไบค์. NSR80 ฉันค้นหาในเว็บไซต์ "RSYokota" และพบ RSYokota จากยุครุ่งเรืองของมินิไบค์คันที่ 2 เมื่อ 30 ปีที่แล้วจากกลุ่ม Chamber ซึ่งพบได้น้อยกว่า NSR50 ดังนั้นฉันจึงรอการมาถึงของมันด้วยความคิดถึง .
คุณชอบมันอย่างไร?
ที่เรียกว่า "ห้องบนถนน" อย่างไรก็ตาม หากไม่เปลี่ยนเครื่องฟอกอากาศจาก OEM เครื่องฟอกอากาศจะถูกหยุดที่ความเร็วต่ำและกลางตั้งแต่เริ่มวิ่ง
ส่วนแนะนำผลิตภัณฑ์ของ Webike
แถบกำลังเน้นแรงบิดและความเร่งในช่วง 7,500 ถึง 11,500 รอบต่อนาที
หลังจากติดตั้งห้องเพาะเลี้ยงแล้ว โปรดลองตั้งค่าเฟืองเฟืองเป็นปกติหรือใกล้เคียงกับปกติมากที่สุดเพื่อให้ได้ประสิทธิภาพตามที่คาดหวังตั้งแต่เกียร์ 1 ถึงเกียร์ 6
การตั้งค่าคาร์บูเรเตอร์ไม่จำเป็นอย่างยิ่ง แต่เมื่อทำงานด้วยความเร็วสูง ควรเพิ่มค่าความร้อนของปลั๊กเป็นประมาณ 9 จะดีกว่า"
กล่องทำความสะอาด OEMAir ถูกถอดออกและแทนที่ด้วย Power Filter และไอพ่นหลักถูกเปิดขึ้นประมาณ 10 และปลั๊กก็เปิดขึ้นเป็นหมายเลข 9 เพื่อเป็นมาตรการประกัน
ในสถานะนี้ "สิ่งที่แนบมากับ Pon" เครื่องยนต์จะหมุนอย่างกระฉับกระเฉงจากช่วงกลางถึงรอบต่อนาทีสูงเมื่อเปรียบเทียบกับ
เปรียบเทียบกับผลิตภัณฑ์อื่น ๆ ได้อย่างไร?
การเปรียบเทียบกับวัสดุของผู้ผลิตบางรายที่กล่าวถึงข้างต้น: ลักษณะเอาต์พุตลดลงเล็กน้อย RPM และง่ายต่อการใช้งานสำหรับการขับขี่ในเมืองอย่างแน่นอน เร็วกว่า Chamber ก่อนที่จะเปลี่ยนประเภทเอาต์พุต rpm สูง.
โดยส่วนตัวแล้วจุดที่สำคัญที่สุดคือห้องเหล็ก "เสียง" ความดีของ
สแตนเลสเป็นวัสดุแข็งที่ดูดซับแรงสั่นสะเทือนและเสียงอื่นๆ ที่อาจเป็นอันตรายต่อหูได้ ในทางกลับกัน ห้องเหล็กมีความยืดหยุ่นในปริมาณที่เหมาะสมในการดูดซับเสียงรบกวนที่ไม่พึงประสงค์ ส่งผลให้มีเสียงไอเสียที่นุ่มนวลและน่าพึงพอใจ (มีความแตกต่างระหว่างบุคคล) 。
[ประเด็นที่ควรทราบ]
ดังที่ฉันได้กล่าวไปแล้วข้างต้น หากติดตั้ง OEMAir Cleaner&Filter เหมือนเดิม ช่วง RPM ต่ำถึงกลางจะถูกยับยั้ง และการตอบสนองจะไม่ดีและความเครียดจะเพิ่มขึ้น
สภาพรถและระดับความสูง (ความดันบรรยากาศ) การตั้งค่าคาร์บูเรเตอร์จะแตกต่างกันไปขึ้นอยู่กับผู้ซื้อแต่ละราย และผู้ซื้อแต่ละรายควรสำรวจการตั้งค่าที่ดีที่สุด
รายการอื่น ๆ ที่จะเป็นประโยชน์
ปัจจัยในการตัดสินใจซื้อ
เขาสร้างชื่อให้ตัวเองในชุมชนมินิไบค์มาเป็นเวลา 30 ปี RSYokota พลังของแบรนด์
ราคาค่อนข้างสมเหตุสมผลสำหรับกลุ่มผลิตภัณฑ์ของ RSYokota
ความจริงที่ว่ามันทำจากเหล็กนำไปสู่การซื้อครั้งนี้
[มันใช้ยังไง?
มันเป็นรถรุ่นเก่า ดังนั้นโดยพื้นฐานแล้วมันคือ Dynamic Preservation รัฐ อย่างนั้น.. "ชนะการแข่งขัน!" และ XXXCourse เร็วที่สุด!" ถ้าขับในเมืองก็ไม่ใช่ปัญหา
【ส่วนที่รวมอยู่: มีหรือไม่มี】
Chamber&Silencer, Silencer band สำหรับการยึดตัวถังและการติดตั้งง่าย คู่มือการใช้งาน (รวมถึงการตั้งค่า) รวมอยู่ในแพ็คเกจ.
[สินค้าที่จะซื้อร่วมกัน
เปลี่ยนหัวฉีดต่างๆ เพื่อตั้งค่าคาร์บูเรเตอร์, Power Filter, Funneetc และบังเอิญเสียบปลั๊ก
ความคิดเห็นและการร้องขอไปยังผู้ผลิต
จำนวนยานพาหนะที่มีอยู่นั้นลดลงทุกปี แต่เราหวังว่าคุณจะคงรายชื่อยานพาหนะต่อไปให้นานที่สุด