- Home
- Product reviews
- Motorcycle Parts
- Handles & Control Parts
- Controls
- Hand / Knuckle Guards
- Design of the Ancient, a little cheaper would be... (Shin-Yo: Enduro Handguards)
【Shin-Yo】Enduro Handguards Review
Design of the Ancient, a little cheaper would be appreciated.
[How is it used?
The hand guard of DJEBEL250XC, which I have been riding for many years, was getting worn out due to repeated tipping over, so I decided to replace it with a new one. RALLY50Bush." I chose the "real" one...but the real one is expensive.
So we chose this product of the same design that we found in Webike's product introduction section.
To be honest, there are cheaper imitations on the Net, but they are prone to distortion due to the difference in the quality of the AluminumMaterial. I hope this product will last longer than those products, and I hope it will do well.
Was the one you received as per Image?
The design is the same as the RALLY50Bush that was installed on a high percentage of the Dual PurPass cars I saw in my youth during the Showa period. Although the year of the vehicle is 2006, I think it suits the DJEBEL250XC, which was basically designed in 1996.
The original DJEBEL250XC is equipped with an OEM hand cover, but this product is more This is it!" The product was exactly as shown in the Image and fit perfectly.
Was the installation difficult?
The bar end of the OEM handlebar is open-ended, so the Axel Holder can be easily replaced without any modification.
If your vehicle has a Close Type Handlebar Bar End & Axel Holder, you will need to replace it with an Open End Type or drill a hole in it.
If you are new to the site, you can use the video Site, etc. Hand guard installation Please search on "etc." to see what the work is, and if it looks too tough for you to watch the video. A friend. Or PRO's Shop." The following is a brief overview of the process of making a request to the
How was your experience with it?
Material:The aluminum guard covers the handlebar from the Handlebar End to the Handlebar Center area, so there is a sense of security even in the event of a fall.
We have yet to experience a fall after replacing the guard, so we have not been able to confirm the durability of the Hand guard, but it seems sturdier than similar products that cost 2-3,000 yen (we are probably hoping that it will be sturdier).
[Included Parts:were they on?
Includes Clamp for GuardBody and Handlebar Mounting, and each Bolt, except Grip and Axel Holder Parts to install the Hand guard with this product alone." Is Quantity:Set
[Was there anything that disappointed you?
If you like the design of this product, you will not be disappointed. (If you don't like the design, you probably won't choose this product in the first place...)
0Other items that may be useful include
Point and hang of installation
When installing in a ManufacturerOEM steel handlebar, the inner diameter is wide, so wrap a certain amount of Vinyl Tapeetc. around the circumference of the fixed bolt and insert it.
Since the difficulty of installation varies slightly depending on the shape of the handlebar, as mentioned above, please adjust it by checking how it looks in a temporary assembly.
[Availability and clarity of the Instruction Manual
No Instruction Manual, Hand guard Quantities:Pair (for Left and Right) Please check the ManufacturerSite, each video, and Webike's impression images to make sure that you do not make a mistake before installation.
[Notes]
For first-time users, be sure to temporarily assemble the Axel side in advance and install it so as not to put pressure on the Axel Holder (over-tightening may make it difficult for the Axel to turn).
[ITEMS TO BUY TOGETHER
If you can afford it, replace the grip etc. with a new one to refresh the handlebar area and make you feel good.
[Opinions and requests to Manufacturer
If the price is a little lower, I would appreciate it for replacement in case of breakage, and if there are more color variations, I can coordinate with the manufacturer's WorkSCHOLAR Knife.
การออกแบบของ Ancient ถูกกว่าเล็กน้อยจะได้รับการชื่นชม
[มันใช้ยังไง?
การ์ดแฮนด์ของ DJEBEL250XC ที่ฉันขี่มาหลายปีเริ่มเสื่อมสภาพเนื่องจากการพลิกคว่ำหลายครั้ง ดังนั้นฉันจึงตัดสินใจเปลี่ยนอันใหม่ RALLY50Bush." ฉันเลือก "ของจริง"...แต่ของจริงมีราคาแพง
เราจึงเลือกผลิตภัณฑ์ที่มีดีไซน์เดียวกันกับที่พบในส่วนแนะนำผลิตภัณฑ์ของ Webike
พูดตามตรง มีการลอกเลียนแบบที่ถูกกว่าบนอินเทอร์เน็ต แต่มีแนวโน้มที่จะเกิดการบิดเบือนเนื่องจากคุณภาพของวัสดุอลูมิเนียมที่แตกต่างกัน ฉันหวังว่าผลิตภัณฑ์นี้จะมีอายุการใช้งานยาวนานกว่าผลิตภัณฑ์เหล่านั้น และหวังว่าจะใช้ได้ดี
เป็นสิ่งที่คุณได้รับตามภาพหรือไม่?
การออกแบบเหมือนกับ RALLY50Bush ที่ติดตั้งในเปอร์เซ็นต์ที่สูงของรถยนต์ Dual PurPass ที่ฉันเห็นในวัยเด็กในช่วงสมัยโชวะ แม้ว่าปีของรถจะเป็นปี 2006 แต่ฉันคิดว่ามันเหมาะกับ DJEBEL250XC ซึ่งได้รับการออกแบบโดยทั่วไปในปี 1996
DJEBEL250XC ดั้งเดิมมาพร้อมกับฝาครอบมือแบบ OEM แต่ผลิตภัณฑ์นี้ยิ่งกว่านี้อีก นี่แหละ!" สินค้าตรงตามที่แสดงในภาพและพอดีพอดี.
การติดตั้งยากไหม?
ปลายแฮนด์ของแฮนด์รถ OEM เป็นแบบปลายเปิด ดังนั้น Axel Holder จึงสามารถเปลี่ยนได้อย่างง่ายดายโดยไม่ต้องดัดแปลงใดๆ
หากรถของคุณมีปลายแฮนด์แบบปิดและที่ยึดแกน คุณจะต้องเปลี่ยนเป็นแบบปลายเปิดหรือเจาะรูในนั้น
หากคุณยังใหม่กับไซต์ คุณสามารถใช้ไซต์วิดีโอ ฯลฯ การติดตั้งแฮนด์การ์ด โปรดค้นหาใน "ฯลฯ" เพื่อดูว่างานคืออะไร และดูว่ายากเกินไปสำหรับคุณในการดูวิดีโอหรือไม่ เพื่อน. หรือร้านค้าของ PRO" ต่อไปนี้เป็นภาพรวมโดยย่อของขั้นตอนการขอไปยัง
ประสบการณ์ของคุณกับมันเป็นอย่างไร?
วัสดุ: ตัวป้องกันอะลูมิเนียมครอบคลุมแฮนด์ตั้งแต่ปลายแฮนด์จนถึงบริเวณแฮนด์บาร์ตรงกลาง จึงมีความรู้สึกปลอดภัยแม้ในกรณีที่ล้ม.
หลังจากเปลี่ยนการ์ด เรายังไม่ประสบกับการล้มเลย ดังนั้นเราจึงไม่สามารถยืนยันความทนทานของการ์ดแฮนด์ได้ แต่ดูเหมือนว่าจะแข็งแกร่งกว่าผลิตภัณฑ์ที่คล้ายกันซึ่งมีราคา 2-3,000 เยน (เราอาจหวังว่ามันจะแข็งแกร่งกว่านี้ ).
[รวมอะไหล่:พวกมันอยู่หรือเปล่า?
รวมถึงแคลมป์สำหรับการติดตั้ง GuardBody และแฮนด์ และ Bolt แต่ละอัน ยกเว้น Grip และ Axel Holder Parts เพื่อติดตั้ง Hand guard ด้วยผลิตภัณฑ์นี้เพียงอย่างเดียว" เป็นจำนวน: ชุด
[มีอะไรทำให้คุณผิดหวังหรือเปล่า?
หากคุณชอบดีไซน์ของผลิตภัณฑ์นี้ คุณจะไม่ผิดหวัง (หากไม่ชอบดีไซน์คงไม่เลือกสินค้านี้ตั้งแต่แรก...)
0รายการอื่นๆที่อาจเป็นประโยชน์ ได้แก่
ชี้และแขวนการติดตั้ง
เมื่อติดตั้งในแฮนด์รถที่เป็นเหล็กของผู้ผลิต OEM เส้นผ่านศูนย์กลางด้านในจะกว้าง ดังนั้นให้พันเทปไวนิล ฯลฯ ไว้จำนวนหนึ่ง รอบเส้นรอบวงของสลักเกลียวยึดอยู่กับที่แล้วสอดเข้าไป
เนื่องจากความยากในการติดตั้งจะแตกต่างกันไปเล็กน้อยขึ้นอยู่กับรูปร่างของแฮนด์บาร์ ตามที่กล่าวไว้ข้างต้น โปรดปรับโดยการตรวจสอบรูปลักษณ์ในชุดประกอบชั่วคราว
[ความพร้อมใช้งานและความชัดเจนของคู่มือการใช้งาน
ไม่มีคู่มือการใช้งาน การ์ดแฮนด์ ปริมาณ:คู่ (สำหรับซ้ายและขวา) โปรดตรวจสอบเว็บไซต์ของผู้ผลิต วิดีโอแต่ละรายการ และรูปภาพความประทับใจของ Webike เพื่อให้แน่ใจว่าคุณจะไม่ทำผิดพลาดก่อนการติดตั้ง
[หมายเหตุ]
สำหรับผู้ใช้ครั้งแรก ต้องแน่ใจว่าได้ประกอบด้าน Axel ไว้ล่วงหน้าชั่วคราว และติดตั้งเพื่อไม่ให้เกิดแรงกดดันต่อตัวจับ Axel (การขันแน่นเกินไปอาจทำให้ Axel หมุนได้ยาก)
[สินค้าที่จะซื้อร่วมกัน
หากคุณสามารถจ่ายได้ ให้เปลี่ยนด้ามจับ ฯลฯ ด้วยอันใหม่เพื่อทำให้บริเวณแฮนด์ดูใหม่และทำให้คุณรู้สึกดี
[ความคิดเห็นและการร้องขอไปยังผู้ผลิต
หากราคาต่ำกว่านี้เล็กน้อย ฉันจะยินดีเปลี่ยนให้ในกรณีที่เกิดการแตกหัก และหากมีสีที่แตกต่างกันมากกว่านี้ ฉันสามารถประสานงานกับมีด WorkSCHOLAR ของผู้ผลิตได้