【AGRAS】Shift Shaft Holder Review
A must for DL1000 V-STROMSX
I installed this because it was difficult to get Neutral on my DL1000 V-STROMSX. Shift touch is much better and Neutral is easier to get.
Responses
Other reviews
Need to remove the base of Side stands sensor when working
It was difficult to work without removing the base of the Side stands sensor from the Side Stand, and I wasted almost an hour to notice this!
Instruction Manual is unfriendly, no tips for installation
There is a video of the installation on YouTube, so we recommend checking it out before proceeding.
It is not difficult to install once you know the procedure.
It seems that the base of the side stands sensor and the Shift Shaft Holder interfere with each other, so it is necessary to adjust it by biting a washer or something.
The bolt on the engine side cannot be removed with an automotive tool, so a small type M8 socket wrench is required. (I think it is difficult with MONKEY Wrench because Space is too small)
Others can be worked with on-board tools
In general, it's a good thing, but it's not very friendly.
View detail
Improved feel of Shift change
As mentioned in other reviews, when you Shift change Pushingja. I have a small change in the size of the "Small". I am not sure if I would buy an item of this price just for that purpose, but I think it is worth it. View detail
Shift change is stable
Since the delivery of the new car, the GEAR has been disconnected during shift changes, and the spring of the shift shaft was recently disconnected and had to be repaired.
After the repair, I tried to ride the car but the problem was fixed but the shift feeling was still the same, so I researched to find a solution and found this product.
WeBike did not have it in stock when I first ordered it, but it came in on the same day and I had it in hand.
Installation is no problem if you have a bolt nut installation/removal skill, a hexagonal wrench, and a ratchet set.
After installation, I went on a touring trip of about 300 km, but the shift change was decided tightly and I was able to drive without worrying about shift change without any GEAR loss.
We felt that this would be a component that Manufacturers would want to equip from new vehicles.
View detail
Improved operability
It is about 1800km on the road, but the Gear changing operation has improved.
Neutral can be entered from above or below.
I am glad I installed it, although I can feel the influence of the others, such as the familiarity of the gear.
It looks good and Parenthesis is good.
View detail
Tightly feeling good
[How is it used?
Purchased after deciding to purchase a vehicle and installed and used immediately after delivery.
Was the installation difficult?
Installation was easy, but in my case there was some interference with some parts of the Stand switchPlate.
This was probably due to individual differences in the car Both Sides, and the interference was then avoided by slightly bending the Plate.
How was your experience with it?
Since the shift shaft of the Gixxer SF250 is long, we purchased this product in the hope that it would prevent the rattles from becoming too large and making the shift feeling worse. I am satisfied with the tightly operated feeling because I change the shift shaft frequently when I ride on mountain passes.
[Others]
Shift feeling is a very important factor to drive Motorcycle comfortably, so I recommend you to install it as soon as possible.
View detail