- Home
- Product reviews
- Tools
- Hand tools
- Pullers
- Must needed tool when removing the TW Flywheel... (YAMAHA: YAMAHA OEM Rotor Puller)
【YAMAHA】YAMAHA OEM Rotor Puller Review
Must needed tool when removing the TW Flywheel
bought this OEM bolt when I needed to do work on my tdub engine.TDUB ,The flywheel is mounted onto the tapered end of the crankshaft. It is secured from rotating with a Woodruff key, and is tightened down by a bolt that threads into the end of the crankshaft. To remove the flywheel, you must first remove this bolt, The next step is to thread a bolt ( THAT'S WHAT THIS OEM BOLT ABOUT ,CALLED OEM ROTOR PULLER OR FLYWHEEL PULLER) into the internal threads of the flywheel.The TW's rear axle is the correct thread and can be use to do this also BUT I don't want to take any risk and buy a YAMAHA OEM BOLT ,THAT DESIGN TO DO THE JOB WITHOUT HESITATION.As this bolt is tightened, the flywheel will be pulled free from the tapered crankshaft. All threads are standard right hand threads . Then secure the flywheel from turning and then try to remove the Flywheel bolt first Then you should be able to use a proper sized bolt/flywheel puller to get the the flywheel to pop free. The proper thread size needed is 16mm x 1.5 RH . as usual package received very quickly after dispatch from japan. quality packaging and quality service .thank you WEBIKE. Highly Recommend Online shop. 5Star
เครื่องมือที่จำเป็นในการถอด TW Flywheel
ซื้อโบลต์ OEM นี้เมื่อฉันต้องการทำงานกับเครื่องยนต์ tdub ของฉัน TDUB มู่เล่ติดตั้งอยู่ที่ปลายเรียวของเพลาข้อเหวี่ยง ยึดไว้ไม่ให้หมุนด้วยกุญแจดุจดัง และขันให้แน่นด้วยสลักเกลียวที่เกลียวเข้าที่ปลายเพลาข้อเหวี่ยง ในการถอดมู่เล่ คุณต้องถอดโบลต์นี้ออกก่อน ขั้นตอนต่อไปคือการเกลียวโบลต์ (นั่นคือสิ่งที่ OEM BOLT เกี่ยวกับ เรียกว่าตัวดึงโรเตอร์ของ OEM หรือตัวดึงมู่เล่) เข้าไปในเกลียวภายในของมู่เล่ เพลาล้อหลังของ TW คือ ด้ายที่ถูกต้องและสามารถใช้เพื่อทำเช่นนี้ได้ แต่ฉันไม่ต้องการเสี่ยงและซื้อ YAMAHA OEM BOLT ซึ่งออกแบบมาเพื่อทำงานโดยไม่ลังเล เมื่อขันโบลต์นี้แน่นแล้ว มู่เล่จะถูกดึงออกจากตัว เพลาข้อเหวี่ยงเรียว เกลียวทั้งหมดเป็นเกลียวขวามาตรฐาน จากนั้นยึดมู่เล่ไม่ให้หมุน จากนั้นลองถอดโบลต์มู่เล่ออกก่อน จากนั้นคุณควรใช้โบลต์/ตัวดึงมู่เล่ที่มีขนาดเหมาะสมเพื่อให้มู่เล่หลุดออกมา ขนาดเกลียวที่เหมาะสมที่ต้องการคือ 16 มม. x 1.5 RH เหมือนเดิมครับ ได้รับของเร็วมากหลังจากส่งจากญี่ปุ่น บรรจุภัณฑ์คุณภาพและบริการที่มีคุณภาพ ขอบคุณ WEBIKE ขอแนะนำร้านค้าออนไลน์ 5ดาว
Show originResponses
Other reviews
Since it is a Yamaha original manufacturer's product, it is satisfactory at all with a natural thing.
Since it is a Yamaha original manufacturer's product, it is satisfactory at all with a natural thing. View detail
It was used at the time of engine decomposition of YAMAHA TW200, 236. If there isn't this, I think it is probably impossible to remove a rotor. It is not too bad, not too good, on the characteristic of the product. Although it seems a screw, there is like
It was used at the time of engine decomposition of YAMAHA TW200, 236. If there isn't this, I think it is probably impossible to remove a rotor. It is not too bad, not too good, on the characteristic of the product. Although it seems a screw, there is likely to be an intensity. View detail