【brembo】[Super Sport] Floating Disc Left & Right Set Review
![[Super Sport] Floating Disc Left & Right Set brembo](https://img.webike-cdn.net/catalogue/10188/floating_disc_image_TS.jpg)
Fits: KAWASAKI ZX-6R Ninja, KAWASAKI ZX-10R Ninja, KAWASAKI ZX-6R Ninja, KAWASAKI ZZR1400, KAWASAKI ZX-10R Ninja, KAWASAKI Z800e, KAWASAKI Z800, KAWASAKI Z800
320mm installed on a '21 ZX-6R
What made you decide to buy?
At this year's WeBigSummerSale, I got the brembo I've been wishing for. [Super Sport] Floating Disc (for Left and Right Set) I purchased a new set of "Gasket Disk Plate" and "BoltSocket" at the same time! and at the same time, I also purchased KawasakiOEM Parts, Gasket Disk Plate and 10 BoltSockets.
[How was the installation?
To remove the disc, a sleeper is installed under the wheel, but I used an old tire. After removing the OEM disc, install the new Gasket disc Plate and assemble in the reverse order. When replacing the disc, be careful not to accidentally distort the disc and ABS disc when replacing the disc! and be sure to check the back and front sides of the disc!
[Reference.
ZX-6ROEMFront Disc is 310mm. The Floating Disc you purchased is 320mm, about 10mm longer than OEM, Quantity:Pair (for Left and Right) The 320mm size is 5mm larger than the ZX-6R. However, I did not have enough information to install the 320mm on my ZX-6R, so I contacted Webike about the product, but it was outside the OEMSize range, so I decided to use the 320mm. "Nonconformity" I received a response. I thought that 320mm could be installed in my estimation, but I was still not sure and the Risk at the wrong time was a high Risk, so I called the bremboJapan distributor, KOKEN, and asked them to check it out. The '21 ZX-6R can be installed!" I received a response. This answer pushed me to purchase the 320mm with 10mm up.
How was your experience with it?
It is the first floating disc in my motorcycle life, and everything is new.
Responses
Other reviews
I heard prices are going up, so I bought ahead of schedule.
I had planned to buy it a little further down the road but was told that the price would be raised next month.
A friend of mine had installed a 320mm, so I thought, "I'll get one too! But just before I went out, I decided to buy a 310mm because I didn't want to bother with Caliper adjustment! LOL!
The impression is that it is cost-effective and easier to handle than expected.
However, I am concerned about durability since this is my first time with Full floating.
View detail
Satisfaction is awesome!
CBR1000RR SC57 Late (2007) Attached to
It can be installed on GALE SPEED wheel without any problem.
The grip is much shallower and the feeling is different since it is 5.5mm instead of 5.0mm of the STD Disc, but the effect is excellent.
I also purchased brembo pads and replaced them at the same time.
The front side braking system is now fully brembo for now.
Above all, it is a good choice for Bonsai Machine because it looks very different at a glance. (Lol)
View detail
ZX-14RHigh-grade OEM brembo and replacement
UniversalOEMBrembo caliper is also a dokattei
AELLA's CaliperWasher because Caliper's Center is not available.
Incorporation is required.
Quantity:1 Set of 4pcs. about 5000 yen, so be sure to include it. If you ask at Webig.
If in stock, it will arrive the next day.
It is a normal process if you just put it on as it is, but the following work is added.
Outer and inner parts disassembled, Bell Hammer Gold applied and assembled
Gold genus surface modification by heating Pin
Disassemble, apply a very small amount of Bell Hammer METALGrease, and assemble.
This reduces the vertical rattling that also occurs in de Fault.
Running with Brake applied to burnish.
Note that Brake Pads has assembled a new RKMega alloyX.
Fluid is BillionBA5 DOT5.1
Carriages are fixed with AELLACenter ejected Washer, Universal64Titaniumium BoltM10 L60mm Flange17mm.
The product is designed to achieve both dramatic braking force and joint wear resistance. Unbranded
View detail
type of disc with a wooden pole on the top (used for racing, etc.)
It is thicker than OEM, so the touch is harder, and there is a clattering sound. View detail
Fit for my bike
It is fit for 2015 zx6r 636. Very beautiful and awesome. I love this disc more then before brembo's Oro disc. The gold color which is sharp for my motorcycle. View detail