【DAYTONA】Oil Jug with Cover Review
It is used for dilution of LLC.
[How is it used?
It is used to dilute and pour LLC.
However, it was a little too Large.
Was the one you received as per Image?
It was just like the Image.
I have purchased different capacities of this before.
How was your experience with it?
It does its job of pouring the liquid (LLC) into the Radiator.
There is no particular damage.
[Points to note]
I like the way the hose bends, but it leaves liquid on the bellows part.
Also, there is a gap in the joint between the lid and the hose, so if you store it outside, insects will get in before you know it.
Responses
Other reviews
Lid is Large
There are various types of oil jugs, but I change the oil myself once or twice a year, so without a lid, I end up with dust and garbage all over the place.
So I purchased the lid because I felt it was absolutely necessary to have one.
However, the overall construction is still price-approved, so I am not sure if I would recommend it.
You might as well pay twice as much and buy a better jug. (The one that doesn't have a screw-in Type lid)
View detail
It's quite easy to use, but …
Purchased for Oilfor Replacement.
On the plus side, it is inexpensive and easy to use.
The bad points are that the spout is a little thicker and the volume Memory is rough.
I'm wondering if there is anything more that can be done about the bad points in particular…
It is not an expensive product and I will buy other products to see how they compare.
View detail
It's a lid, so Garbage won't fit in it.
DIY oil replacement is something that is only used a few times a year.
I didn't like that the jug I used to use had to be cleaned first before I could use it again if I didn't take measures to prevent garbage contamination.
This jug has a lid, so I don't think I need to be that nervous about it, but I won't know the results until I've used it a few times.
In the picture of the product description, the cap of the spout is Red, but the one I received was White.
View detail
Used for the first Oil change in my life
I'm an old man who has been riding for more than 20 years, but I haven't changed oil by myself for a long time, but this time I tried to do it. I bought a Oil Jug for this purpose.
I researched the SV650X and found that it needs 2.75L when replacing the Oil filter, so I researched the jug to fit it.
I bought the 2-liter one because I thought I could split it into two portions because it was too large to keep.
When you open the lid to put in the oil, there is a net to prevent foreign substances from getting in, but it is not good.
When I poured Oil, it didn't go through very well and I spilled it on Sheng Large.
I ended up taking it off and putting Oil in.
View detail
Buy at Oilfor Replacement in MONKEY
Because the amount of oil use is 900ml, I was looking for the one of the small size for 1? When storing, the tip of the hose and the spout also have a gap, and the place where the contamination of garbage etc. can be prevented is good, but because Oil does not fall from the Filter of the spout easily and the spout is slanted, Oil flows to the hose when measuring 900ml, and I felt that it was unexpectedly troublesome. I felt it.
If it's 900ml, I think it's easier to remove 100ml from the can and use Bellows to clean it.
View detail