【amon】Mini Flat Type Fuse Power Supply Review
Very convenient.
This Connector is used to get power from the Mini Flat Type Fuse.
This is very useful.
I often use it as a power source for my car. Most of the common vehicles have a fuse box at the foot of the vehicle.
I need to pull power to run the DriveRecorder, Radar detector, etc., but the Cigar lighter socket makes it look rather ugly...
In the case of a motorcycle, there is no Cigar lighter socket in the first place.
The Fuse is taken out from 15AFuse, but since it is via Pipe Type Fuse 5A, it will fuse if a load of 60W or more is applied. (The Fuse that is connected to the MainFuse is 15A, so the allowable power of the MainFuse is 180W. Paradoxically, if you use more than 120W on the MainFuse side, the Main will cut off if you use more than 60W)
A fuse box with a lid requires some ingenuity in terms of how the wiring escapes.
Responses
Other reviews
I didn't think it would be this easy.
DAYTONA
Attachment Power Supply Unit D-UNITPlus (DeeUnitPlus)
https://www.webike.net/sd/24232600/
Used to take ACC power from the
I was worried about whether the lid of the FuseBox would close properly, but it did, to the point that it never closed completely but not problematically.
Need to check continuity and be careful about the direction of insertion.
I installed a pluggable Fuse to get power before the current flows through it.
View detail
Easiest power extraction
There are three simple ways to extract power from the Gixxer 2020 MODEL~.
Bullet terminal terminal for attachment hidden under the tankLeft Side, not accessible without removing the Side cover
Computer diagnostic coupler in the ETC storage space under the Rear Sets.
And from the Spare sub of the Fuse BOX under the Front seat.
This is the quickest way to get it from here, so this guy is always there for us.
I usually use Bullet terminal, but this time I used Terminal, which is quite easy to use.
View detail
That might be a little high
I bought it to get power from a Fuse box.
I can easily get power by simply replacing the Fuse.
As a product, it is easy and good.
However, considering Product Contents, we feel the price is high.
View detail
I needed it to install the D-UNIT.
[How is it used?
DAYTONA's Power Supply Extraction Parts "D-UNIT. I bought this product because I need to use it with D-UNIT and Fuse box. I checked it by myself, but it was not written in the Site of D-UNIT.
(I'm a beginner, so I'm honestly not sure if it was really necessary...)
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
I was able to install it without any modification.
How was your experience with it?
It's nice to know that no processing is required.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Please check the number of voltage you need before you buy. ←People who bought various products without checking well
View detail
Note the shape of the Fuse BOX
The USB power supply was prepared to be installed under the Rear Sets. Installation was easy and only needed to replace the Fuse, but the wiring from the Fuse did not tighten against the lid of the Fuse box, an elementary mistake due to lack of confirmation.
I stopped taking it out because I was worried about it. It's a good product that's easy to use, so I'll think about converting it to something else.
View detail