【ACTIVE】Fender Eliminator Kit Review
It is solid and has a good texture.
At first, I had installed CHINA's cheap Fender Eliminator Kit, but the hole to install the blinker was too large and the hole was noticeable even after installing the blinker (you could see the other side), and the LED License Plate Light was too large and looked cheap. I replaced it with this one because I didn't like the cheap-looking feeling of the Large License Plate and the Clearance on the side of the car body.
Installation is not particularly difficult. First, pull out the Coupler, which integrates the Blinker and License Plate Light wiring, then remove the OEM Rear Fender, and you are halfway through the installation process.
All that is left to do is to install the equipment in accordance with the Instruction Manual, which is not difficult at all, so I would like to encourage custom beginners to give it a try.
However, the instruction manual included in the package is white-black and difficult to understand, so it is better to use the PDF version of the instruction manual, which can be downloaded in color by accessing the Active homepage from your smartphone.
I wish they would have included a color printed Instruction Manual from the beginning... but I am thankful that a color version is available. I think this is a good measure to lower the Hurdle of installation.
It is an aluminum Fender Eliminator and costs close to 20,000 yen, but the quality is good because of its high price.
I especially like the elegant way the License Plate Light shines, where the light source is not fully visible.
However, I personally prefer the License Plate to be a little closer to the body of the vehicle, and the License Plate should be laid down to the limit, although it is legally regulated. Also, it would have been better if there was some kind of improvement to plug the holes where the Blinker and License Plate Light wirings are pulled into the body of the car. But it is a Large Merit that can pass the inspection as it is.
*Reflector is not included and must be purchased separately.
The S1000RR after 2015 seems to have a slightly different image than the Wiring color in the instruction manual.
Also, when I disconnected and connected the OEM License Plate Light Wiring to power the LED License Plate Lamp that was included in the CHINA Fender Eliminator Kit, it came on at first but soon stopped working.
Then I connected the License Plate Light of this product to the OEM License Plate LightWiring and it did not light up. I had no choice but to branch off from the ETC power supply and Wiring.
Responses
Other reviews
Easy to install, but ???.
Installation is easy, and the design fits well with the car body without any discomfort. However, I think that the reflector should be included from the beginning since ACTIVE also manufactures a reflector. View detail
It'll be cool!
I installed it for its appearance!
I am satisfied with the style and the large size!
But the removal of the OEMBlinker is Large strange!
I warmed up the rubber part with a dryer and removed it by prying with a slotted screwdriver.
Note that Blinker is also thin and easily broken!
Reflector is sold separately!
View detail
It was not good.
The product is good, but the Instruction Manual is not beginner friendly.
Also, the screws in the "Included Parts:" were different from those in the Instruction Manual, and some were missing, making installation quite difficult.
View detail
Stylish finish
I have purchased Active's Fender Eliminator Kit for every car model so far, so I chose this one again.
Installation requires touching Blinker's Wiring, so if you want to install it yourself, you will need to have at least a minimal knowledge of this area.
The product itself is solid and I have no complaints about its accuracy.
The only thing I would say is that Reflector is a security component and should be included in the package.
View detail
When in doubt, this is the one. I'm glad I did.
[How is it used?
Duration:from about April 29, 2017 to as of September 10, 2023. Only the Blinker Bracket was removed at some Timing
Distance:approx. 68,197 km
Combination items:ACTIVE Reflector Kit Slim, POSH Faith Aluminum License Plate L Size, CF POSH SUS Number Plate Fixing Torx Taper Bolt & Nut Set
Was the one you received as per Image?
The product is exactly as pictured in the Image.
Was the installation difficult?
I think it was troublesome because I didn't know how to remove the cowl at all just after I switched to a new car. Furthermore, it is necessary to remove the seat and tail cowl, not the front part of the vehicle including the SIDE, which is usually removed for maintenance, so even now that I am used to it, I think it is still troublesome. Except for the removal of the cowl, the installation itself is not difficult.
How was your experience with it?
The installation of the Tandem seat naturally causes mud splashes to hit the Tandem seat, which is a cause for apology.
Since the most protruding part is the Tire or Tail cowl, the distance that can be retreated back is slightly increased for the same Space.
Since the Number is placed far forward, and the upper part of the Number is unguarded except for the bracket, the possibility of bending of the lower part of the Number due to a side bag or accidental human impact is increased.
Since all parts are RoseRose, OEM blinkers can be implanted in the beginning, and later, when blinkers are replaced, only the relevant parts can be targeted and removed, creating a clean look at all times.
Note that the Reflector, which must be used in conjunction with the Reflector, is not included in the package.
Probably sturdy, as it has not broken even with the aluminum plate, different bracket and blinker that are not included in the package.
The LED License Plate Lamp is also still reliable, as all four are still building materials.
The vehicle has been inspected as is, so it probably passed. (Vehicle purchased before the revision of the standards)
[Included Parts:were they on?
As shown in the product image.
[Was there anything that disappointed you?
I guess there isn't because there is nothing to be concerned about.
Conformity of License Plate with revised standards
Before revision Being able to read." It is not clear whether the safety standard is met for vehicles with clearly defined angles after the revision, since it has been in use since the time of the
This is a standard item that can be found at most Large Mortgage Motorcycle stores, and many riders have probably used it. It is a recommended product that can stand up to the mud and the mileage.
Since the revised criteria are unknown, the risk of BonusPoints being added when caught in some cases should be considered.
View detail