【KITACO】Pulley Lock Wrench Review

It is used for maintenance of the drive system of the SEA BASS system.

I use this Pulley lock wrench for maintenance of the Scooter drivetrain of the SEA BASS series. The thick-walled handle is non-slip and easy to apply force. View detail

It's good not to use universal product

We used for Address V125G modified light motorcycle already settled.
Since my address applied Takegawa's Bore Up Kit, there was the following problem.
1. Pulley included with Kit does not have a Pulley holding hole like an OEM
2. Kit attached Pulley has a larger outer circumference than the OEM, there is no clearance for suppressing U-shaped Universal Pulley
Therefore, there was no fixation method of Pulley, Weight Roller was being replaced by Impact wrench, but if you want to manage Torque
As a result of introducing this product, as expected, it is exclusive goods, suppressing KICKNut on the outer side, suppressing the idling of Pulley, 17 mm Socket and Torque wrench (50Nm) I was able to work safely.
In addition, since I had Impact wrench when I loose it, I do not use this product, but after hanging KICKNut as a hang when I tighten it, I can apply to Center Stand that is standing It is a pleasant experience that you can use both hands without having to suppress the product itself. View detail

Weight RollerSetting

It is a type anti-rotation tool to engage with Yamaha's ScooterKick gear. Yamaha 2 St System Scooter is available for all models and CYGNUS series.
We can work very efficiently because we do not need a preliminary action for Pulley's attachment and detachment. It is useful when frequently attaching and detaching Pulley, such as when setting Weight Roller.
As a similar tool, I also use the tool of buzzetti, but because it fixes using Screw of Crankcase Cover, it can fix firmly, but it takes a little longer to install. However, here is a simple one that just processed the steel sheet PRESS, so it is Compact so we are using it for car mounting.

As hang of how to use, this product and tools for Center nut as shown in the picture (Such as Ratchet wrench) When you hold the handle of Bear and Clutch at the same time with the handle at a close angle, you can easily get power.

Is it difficult to say that it is expensive for special tools that have no use other than this.
Also, since the part of the handle is not offset, the model (Say or say Engine) Some interfering parts may come out depending on. (Although the picture is AeroX 50R's Minarei MAEngine, since Crankcase 's edge is coming up to Limit, there are practically only Pulley down positions. )

As an introduction to Scooter messy we recommend a universal Pulley holder.
http : / / www. webike. net / sd / 21784446 / View detail

Although he thought that he would use for the cygnus X for 08 years and bought it, it hits and has a close game to the feather of a pulley. If it will arrange if the angle degree is attached to a slight degree, but it does by force, the angle of a loc

Although he thought that he would use for the cygnus X for 08 years and bought it, it hits and has a close game to the feather of a pulley.
If it will arrange if the angle degree is attached to a slight degree, but it does by force, the angle of a lock wrench is missing.
It is the price about mind! View detail

It is always used for pulley desorption of yamaha JOGZ-2 (SA04J). It should be able to be used in common with the 50~100-cc scooter of a yamaha. Although it is used very well for a long time, I would like to write the comment to embezzle. * Si

It is always used for pulley desorption of yamaha JOGZ-2 (SA04J).
It should be able to be used in common with the 50~100-cc scooter of a yamaha.
Although it is used very well for a long time, I would like to write the comment to embezzle.
* Since it hooks on the gear (crown type parts) of * kick a good place and can fix, although it is large to a band type pulley holder, especially,
It does not say damaging the feather of a drive face or giving a wound, and desorption is possible, without putting a burden on a pulley or a drive face.
Moreover, since big torque can be applied, can't it respond to the nut liable to [ which had been neglected for a long time ] adhesion, either, without sliding by a gear meshing?
Since a gear is only engaged also when using it, the time and effort of loosening or binding tight is not taken, but we recommend it strongly to especially those that desorb a pulley frequently.
* Since glasses wrenches cannot be used when loosening * nut a bad place or binding tight, a socket wrench etc. are needed.
Moreover, since the mountain of the gear (crown type parts) of a kick may be becoming more round and more round, tabling may become sweet and it may slip if it is used for a long time, please use it, pressing down by hand firmly.
Others are not found a bad place now in particular.
As a general comment, if a price is cheap to a slight degree, it is five stars without a complaint, but since there is no dissatisfaction in particular individually for Kon, I will consider it as four stars.
To those who make maintenance of a drive-line frequent, if you refer to the above, I am pleased. View detail