【KITACO】Super Fuel Hose Set Review
Since the hose currently attached to the carburetor of the kitaco from the first was short, it purchased. A thing 3 mm in inside diameter suits the breather of mikuni VM26 carburetor. Since it seems that green differs in the quality of a medium an
Since the hose currently attached to the carburetor of the kitaco from the first was short, it purchased.
A thing 3 mm in inside diameter suits the breather of mikuni VM26 carburetor.
Since it seems that green differs in the quality of a medium and a pink differs in softness in the quality of a soft, and a hose color, it can choose by a use.
I think that it has for a while if there is one since the die length is 1 m.
Responses
Other reviews
สินค้าคุณภาพตามแบรนด์ เชื่อถือได้สภาพกล่องและสินค้าเรียบร้อยดี แพ็คสินค้าได้ดี ร้านนี้ของแท้คุณภาพเยี่ยมมีหลายแบรนด์ให้เลือกใช้ เยี่ยมครับ ให้5ดาวเลยครับ View detail
สินค้าคุณภาพตามแบรนด์ เชื่อถือได้สภาพกล่องและสินค้าเรียบร้อยดี แพ็คสินค้าได้ดี ร้านนี้ของแท้คุณภาพเยี่ยมมีหลายแบรนด์ให้เลือกใช้ เยี่ยมครับ ให้5ดาวเลยครับ View detail
สินค้าคุณภาพตามแบรนด์ เชื่อถือได้สภาพกล่องและสินค้าเรียบร้อยดี แพ็คสินค้าได้ดี ร้านนี้ของแท้คุณภาพเยี่ยมมีหลายแบรนด์ให้เลือกใช้ เยี่ยมครับ ให้5ดาวเลยครับ View detail
Super fuel hose set I.D.Φ3×1m
Used for carburetor overflow hose
I bought Pink last time but 1m was not enough so I bought more.
I decided to use a two-tone color anyway, so I went with Green this time. It is now easier to visually inspect each cylinder.
Now we can also verify which one is more durable. v
Compared to Pink, which is squishy and easy to handle, Large is harder. It is almost as hard as a normal Vinyl type.
Pink is easier to handle (it is soft and stretchy, so you can get a little bit of mouthfuls in the SizeOver area), but either is fine for Overflow.
Green is recommended for use in areas with tight bends, where the pipe is not easily crushed.
As a side note, I always reserve KITACO's Package (plastic) because of the above etc.
It can be used to make a washer for the gap between the clutch lever and holder when there is more play between the clutch lever and holder, or to make a collar to prevent sticking between the accelerator grip and switch holder. And it's free.
View detail
Super fuel hose set 991-0311000
Used for Carburetor lower overflow hose.
This is the case in the Parts List. (mk? was it?) I thought the inner diameter was 3.5mm, but the alternatives from Company P and Company D were also 3mm, and KITACO did not have half as many, so I bought 3mm. KITACO also did not have a half-decent number, so I bought the 3.5mm. I bought a 3.5mm diameter pipe because it is soft and easy to use.
I liked the Pink color, although the slightly firmer Green would be better for Flow Hose.
When I tried to replace it, I discovered the problem:1m is Quantity.:I can only take 2pcs.
Plans to reorder. I'll have to write another tiresome impresario. I have no time to be poor.
Should we try a Pink/Green two-tone color at this point?
View detail