【TANAX】ETC Handlebar Mount Bracket Review
In order to carry out the handle mount of the antennas integral-type ETC in-vehicle unit, it attached to the boulevard 400. By two arms, the degree of freedom of the fixing position of an ETC in-vehicle unit is quite high. In the case of, the angl
In order to carry out the handle mount of the antennas integral-type ETC in-vehicle unit, it attached to the boulevard 400.
By two arms, the degree of freedom of the fixing position of an ETC in-vehicle unit is quite high.
In the case of, the angle of the arm was adjusted so that it might not be conspicuous as much as possible, and an ETC in-vehicle unit could be attached with the low (close to a handlebar) location of back slippage.
I think that the ETC in-vehicle unit is not so much conspicuous since the car body of a bull is large (see the submitted photo).
Since it is the structure carried out strongly so that it is enough to attach an ETC in-vehicle unit, the radar contact machine has also been attached to the top face of an ETC in-vehicle unit.
In addition, although the ETC in-vehicle unit is covered in a prank and theft prevention using ETC CASE of NEWING, this case serves also as the pedestal of a radar contact machine.
In order to make it unify the circumference of a handle, color chose the plating type, but at the present which half[ one year and ]-passed, rust has loomed in a nut with POTSUPOTSU.
However, since it is hiding in the ETC in-vehicle unit, it is hardly conspicuous.
Responses
Other reviews
It's pretty good.
The price is expensive.. Making is strong and good.
It is originally for ETC, but Jupiter
I will use it as SUPER CAT Tray Da Mount. The width is exactly right with the width of the detector. I also took 12 V key interlocking Fuse so the operation check was also good,
I'm looking forward to Touring.
View detail
An ETC Handle Mount stay is attached also to the portion across the Handle . -- the attachment Bolt of the Type which can do removal simply because of theft prevention since it is merely an ETC integral type, and -- if the atta
An ETC Handle Mount stay is attached also to the portion across the
Handle
.
-- the attachment Bolt of the Type which can do removal simply because of
theft prevention since it is merely an ETC integral type, and
-- if the attachment Bolt of the Type whose removal is simply impossible can
choose, I will think that it is good.
If it can do after
and height can also be adjusted to a slight degree more highly, I will think that it is good.
.
.
View detail
It attached to VTR250. An on-board ETC unit is JRM-12 of Japan Radio. Since I got the store to do attachment, it is unknown for details, but the degree of freedom of the degree of setting angle seems to be quite high. Moreover, since the thick
It attached to VTR250.
An on-board ETC unit is JRM-12 of Japan Radio.
Since I got the store to do attachment, it is unknown for details, but the degree of freedom of the degree of setting angle seems to be quite high.
Moreover, since the thickness of the clamp part was thin, in spite of having attached the handle brace, a little clutch holder was able to be shifted and it was able to attach to the handle directly.
In addition, the attached screw with which an integral system stops onboard equipment since the theft is dreadful was not used, but prepared separately the screw which can be turned by hand.
However, notes are one.
The direction employed with onboard equipment removed is stay recommendation of Black.
Although evaluation of a product is not influenced since stay is the failure of w it which reflects sunlight and a streetlight and crushes eyes when it is removing and running onboard equipment, although I thought a feeling of unification with a handle as important and it was made the stay of plating --
Attention!!
View detail
It purchased in order to carry out the handle mount of the integral-type ETC. Since a very kind description is attached, it can attach with anyone immediately. GURATSUKI does not have a hard off-road run, either and rigid height is pleased with it
It purchased in order to carry out the handle mount of the integral-type ETC.
Since a very kind description is attached, it can attach with anyone immediately.
GURATSUKI does not have a hard off-road run, either and rigid height is pleased with it.
Moreover, although finishing of the chromeplating was also wonderful and was used for one year, there is also neither peeling of plating nor generating of rust! Thinking that using only the pedestal of ETC does not have undue importance, I put a digital camera, and photograph the animation under run, the file containing a map is attached, or I am utilizing many things.
Therefore, ETC is stopped on a magic tape and it enables it to desorb it (wiring is processed so that a connector may be attached and it can desorb by one-touch).
笙ェ which it also becomes the prank and theft prevention of ETC, and is a case of killing two birds with one stone now
View detail
What is attached in the center of a handle is ETC already installed. The stay purchased this time is the thing attached to the left-hand side. It installed in order to attach a radar finder. Although an elastic band plans to use for the time b
What is attached in the center of a handle is ETC already installed.
The stay purchased this time is the thing attached to the left-hand side.
It installed in order to attach a radar finder.
Although an elastic band plans to use for the time being, stopping, he plans to fix firmly with double-stick tape in the future.
There was rigidity considering budget prices and they were other Ho's impression, and agreement.
Installation was also able to be simplified, and the angle of an angle can also do installation freely and is satisfactory.
Since the path of a handle pipe also had the guidance which can respond to two levels by using an accessory, it has purchased in comfort.
It is recommended.
View detail