【PZRacing】Gear Tronic Digital Gear Indicator Review

This time, it attached to its R1 and saw. Since he wanted to finish wiring etc. finely, it worked by removing all the circumferences of Wright. Time can be shortened, if it attaches simply, and the big connector (16P) which removed the left-hand s

This time, it attached to its R1 and saw.
Since he wanted to finish wiring etc. finely, it worked by removing all the circumferences of Wright.
Time can be shortened, if it attaches simply, and the big connector (16P) which removed the left-hand side inner cover and has required the black waterproof cover will be removed, a terminal will be taken out from the connector by the side of a sub harness (harness by the side of a headlight) and it will attach with solder. However,
If it draws out by force since there is a lock pin, it will lead to breakage of a connector.
Please work by observing well.
Well, it is satisfactory, setting out was also completed and there was no dissatisfaction in particular in particular this time.
Although it is an impression which does a run test, I think that a play grade is fully utilizable. In running a highway etc., it uses again.
(Or [ that it can use also for management of fuel consumption etc. ]) I think whether it is good for the accent of the circumference of a meter.
Probably, it will be better to become brave about preparation, since knowledge and a tool are needed to some extent. View detail

It was worrisome from before, and although there was also a means of direct buying from overseas, it was wavering. When net wandering was carried out casually, it sold by Mr. Webike, and since the price was quite cheap from before, I purchased. Al

It was worrisome from before, and although there was also a means of direct buying from overseas, it was wavering.
When net wandering was carried out casually, it sold by Mr. Webike, and since the price was quite cheap from before, I purchased.
Although anyone could do when the mounting arrangement had some knowledge, but it was indicated to construction explanation that a wiring extraction location was not from a meter flesh side but from CPU, although it speaks about the time lag of a display of a gear position well, a meaning after ??? goods of this sort,
Since it is a region of a toy to put it bluntly, please do not expect.
As compared with a friend's thing before bought directly from overseas, the display of the crystalline liquid became markedly legible. View detail

wiring is too short although it is attachment -- it is . A line must be connected on the way and must be carried out. Although it is operation, the gear ratio of a Fifth-gear Sixth gear is near, and it takes time. Regrettably we cannot not muc

wiring is too short although it is attachment -- it is .
A line must be connected on the way and must be carried out.
Although it is operation, the gear ratio of a Fifth-gear Sixth gear is near, and it takes time.
Regrettably we cannot not much recommend you.
We recommend you the indicator of GIpro DS.
Since wiring is a coupler on type for a long time, it is dramatically easy. View detail

it purchased to Seventh-gear prevention of the phantom -- since it only take a glances (smile), it can check and it can concentrate on operation, he is reliable in a peak and a circuit.

it purchased to Seventh-gear prevention of the phantom -- since it only take a glances (smile), it can check and it can concentrate on operation, he is reliable in a peak and a circuit. View detail

The gear position indicator attached to ZX-9R (E type) is looked for, and this product was found, and since it was cheaper than the thing of the other company, it purchased. When it would be OK since ZX-6R using the same meter harness was on the list

The gear position indicator attached to ZX-9R (E type) is looked for, and this product was found, and since it was cheaper than the thing of the other company, it purchased.
When it would be OK since ZX-6R using the same meter harness was on the list although 9R was not on the main lists, it wired like the wiring method of 6R, but a rotation pulse cannot be taken well, but it is NG.
The staring contest was carried out to the wiring diagram of 9R, and as a result of [, such as making it branch from wiring of a pickup coil etc. ] trying many things, it succeeded by taking a rotation pulse from wiring of DI which comes out of an igniter.
However, since it differs from wiring of a description, responsibility cannot be taken, even if it refers to this report and trouble occurs ...
After attachment, although it set up along with the description, in the way as a description, the color of the back light was not changed easily but the shortage of explanation was felt.
With the description, by explanation at the time of a setup, when 1 blinked, the earth was removed and it was with ..., but when the alphabet was displayed actually, unless it removed the earth, the color of the back light did not change.
The comment which run do not have time lag, either and display a gear position immediately than expected.
Moreover, although it is not how to use original, when a shift change cannot be carried out quickly, after the gear position which is different for a moment is displayed, an original position may be displayed and it may also become the practice which carries out a shift change well.
Although it is satisfactory considering a price on the whole, we recommend you to prepare the wiring diagram of an own motorcycle before work.
The touch which the cheerful friends of the italy made is agreeable. View detail