【DRC】Motoled Edge Taillight Review
It is perfect for RearCowl.
KSR110 (A6) It installed in.
It was DRC of the same shape before but it was Smoke version.
The LED for License Plate Light went off and changed to Red for Smoke because it is not even old.
The LED is out of vibration from a single cylinder.
The goodness of shape and the Fitting of a Manufacturer's Fender kick are good
Responses
Other reviews
This is a highly Universal Tail lamp.
Universal Tail lamp
[How is it used?
I had been looking for a replacement for my KSR-II for many years, but I could no longer install the OEM Product's Tail lamp, so I went to Webike to find one. However, I found this product when I was looking for a replacement for the OEM Product's Tail lamp.
Was the one you received as per Image?
It is a product that is more than an image in the form that has good visibility with the Edge effective design while being compact, and also has universal characteristics that can be installed from off-road motorcycles to road sports type motorcycles without any sense of discomfort. It is a product that is more than just an image.
Was the installation difficult?
As mentioned above, this is a work to install a bracket for Fender Eliminator, which is a self-made bracket, so the drilling and wiring processes are performed in actual products, so it may not be of much help.
After installing it on the Fender Eliminator, all you have to do is connect the wiring of this product to the wiring for the tail lamp on the body of the vehicle, but this product does not have the wiring that is often found in this type of product. "Bullet Type Terminal Spec
Modern motorcycles have connector terminals, so it is easy to find a connector that fits the vehicle body on KITACOConveniencePartsetc. and modify it to make a simple connection.
Fortunately, KSR-II has Bullet Type Terminals for most of the terminals that connect to the lights, so we were able to connect without any modification.
How was your experience with it?
There are no problems with the functionality of the LED bulbs, which have been in place for several years now and are functioning as well as they did immediately after installation.
My personal impression is that the rounded design of the KSR Tail would fit better with the rounded design of the Tail lamp than the pointed design of the Tail lamp. I think that the rounded design of the KSR Tail lamp fits in better than the sharp design.
I had a friend install it on his WR250 after that, and the shape of the tail and the design of this product matched very well, and I honestly thought Parenthesis was good (this is just my personal opinion).
[Included Parts:were they on?
It was a Simple Package with only Body and Instruction Manual.
[Was there anything that disappointed you?
Not at all.
Aside from the above mentioned compatibility, which is a matter of personal preference, I have no complaints about the product design or the kinability of the product.
Other items that would be helpful
Point and hang of installation
This product is a Tail Lamp product, but a vehicle-specific kit that uses this product is also sold by DRC.
The price is a little bit higher, but the Bracket for each car model is also of high quality and you will not feel any discomfort after installation. It's a Manufacturer's product." I am convinced that this is the right product.
For those who, like me, cut, paste, and fabricate to install, please measure the dimensions carefully or do your best to install the product as-is.
[Availability and clarity of the Instruction Manual
An Instruction Manual is included in the package.
[Notes]
Nothing in particular, just be careful not to misplace Wiring.
[ITEMS TO BUY TOGETHER
As I mentioned above, this is also available from KITACO and other companies. OEM Type Connection Terminals by Manufacturer will allow one-touch connection to Harness on the car body side.
Since the method of fixing to the car body varies depending on the car model, it may be better to try a temporary assembly before full-scale installation.
First, check the fixation method by placing it on the vehicle in which you want to install it.
[Opinions and requests to Manufacturer
Please keep up the good work in maintaining prices as much as possible and keep selling for a long time to come.
View detail
Custom Standard Tail Lamp
[How is it used?
Installed on Yamaha's WR155R.
The Fender Eliminator is installed by removing the existing Tail Lamp...
However, even though the shape was the same at a glance, the screw position was different, and we had to modify it.
Was the one you received as per Image?
The mounting screws are as shown in the Image, except for the Screws and Wiring outlet!
I hadn't thought that far ahead!
Was the installation difficult?
Some processing has been done.
Here's the Fender Eliminator Kit I installed ↓↓.
https://imp.webike.net/article/570988/
The Tail Lamp License Plate Light that originally came with the Fender Eliminator Kit has a bad contact and does not glow or shine.
The construction was also somewhat cheap, so I decided to change it at this time and chose DRC for safety and security.
I thought they must have been made in imitation of DRC because the shape is the same, so I put them side by side.
Like the image, there is something slightly different about the W.
The holes in the bracket were already fixed, so we drilled holes in them.
I tried to install it with some gapping, but I thought it was OK, but now the hole size of the wiring does not fit.
The hole was the same size as the 10mm Drill hole on hand, so I gave up on extending the hole and installed a Nut in between to keep it a little floated. Well, it is not heavy, so it should be sturdy.
The WiringCoupler for the Body and Tail Lamp is also changed to Universal Product.
How was your experience with it?
As expected from the DRC, it is a safe light.
[Included Parts:were they on?
Bullet Terminal, not used this time.
[Was there anything that disappointed you?
No need to say anything since it is a Universal Product! The person who installs the product should do his/her best to make it work.
View detail
To the Fender Eliminator in WR.
[How is it used?
Used in conjunction with SRC's Fender Eliminator in WR155
Was the one you received as per Image?
The product was exactly as shown in the Image.
Was the installation difficult?
It was a bit of an adjustment for Universal.
I was able to do it just by scraping.
How was your experience with it?
I have bought it in the past, but it has been versioned up.
The waterproof performance of the wiring root was improved.
[Included Parts:were they on?
Body only.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It's a beautiful looking Refreshing!
I installed it in combination with the Fender Eliminator Kit for the D Tracker250, but I was able to install it beautifully without machining the mounting holes.
RefreshingSporty because it is Smaller than OEM!
Even though it is small, the brightness is excellent, so you can see clearly even from a distance.
View detail
Stylish and cool.
The LED Tail Lamp of the same DRC was attached to the body which was purchased used, but because the Left half and Number etc. were unlit, the same one was purchased again.
As others say, it seems to be difficult to waterproof, and the inside was in a state of rust, so this time I installed it after coking it.
It's been about a month since I used it, but so far it's been a large and durable. (I haven't run in the rain.)
The design is good, so now I'm concerned about the durability.
It's a bit expensive, but I'd buy it again next time if I had to buy the cheap Manufacturer Unknown.
View detail