【KTC】9.5sq. Socket Adapter Review

Precision Adapter

Adapter of KTC [3/8→1/2] has been in use for years and is durable.
It's also good for extraction and accuracy.
Highly recommended! View detail

1 / 2 Socket to 3 / It is used when using with 8.

When clamping in a narrow place, 3 / At 8 Torque wrench 1 / 2 Socket is useful and convenient.
It can be relieved with reliable KTC made. As the number of tools can be limited when using with Course, you can reduce the load. View detail

For detailed work

KTC : 9. 5s. Socket adapter BA 32, KTCDigital ratchet GEK 030 - C 3 A 9. 5sq. In. 3sq. I purchased it for the purpose of doing detailed work that required Socket.
KTC : 9. 5sq. Socket adapter BA 32 has an insertion angle of 9. 5sq. → 6. 3sq. (sq. Concave 9. 5mm sq. Convex 6. 3 mm) can be converted.
Insertion angle side of Socket adapter (Rectangular shape) , The PowerFit shape developed by KTC is adopted, it is a structure that prevents concentration of stress by changing contact from a line to a surface and does not damage the corners of Socket, so more reliable work is possible.
However, PowerFit shape is not done to the Adapter which converts the insertion angle from Small Size to Large Size. This is because the lower limit Torque of Adapter is based on the insertion angle of Smaller one.
To work fine and precise, you also need to reduce the size of the tool you use. It is not a good maintenance if you ignore the tightening Torque, saying it is a small one.
Maintenance tool loves KTC, the insertion angle of Socket and Ratchet is 6. 3sq. 9. 5sq. 12. 7sq. Everything is exclusively used for each.
I think that Torque wrench also wanted to arrange what was in each insertion angle, but if it is a regular Maintenance opportunity, 9. 5sq. SmallTorqueType 2 to 30 N - M, so we can cover almost all of KTC : 9. 5sq. I decided to use it for a while with Socket adapter BA 32.

We kindly compiled the type and use of the insertion angle into Large, so please if you refer to it.

Size of insertion angle is standardized by Inch, and if it is the same insertion angle, Manufacturer is compatible.
- 1 / 4"(6. 35mm) : Used in a narrow place because it is a compact.
- 3 / 8"(9. 5mm) : Using around this Engine, this Size is used for normal maintenance.
- 1 / 2"(12. 7mm) : Used for suspension, car, maintenance of Large type car.
- 3 / 4"(19. 0mm) : Any more Size is used for maintenance of Large machine, construction machine, ship etc..
- 1"(25. 4mm) : For further size, use Impact wrench which uses high pressure air or motorized motor by turning with Ratchet Handlebar etc via Wrench by planetary gear mechanism, and usually do not use it by turning with just human's arm power.
- 1-1 / 2"(38. 1mm)
- 2"(50. 8mm)
- 2-1 / 2"(63. 5mm) View detail

9.5sq. Socket Adapter

I purchased this adapter because I purchased Lock Nut Wrench mistake Size by mistake. Although it is reliable as a tool Manufacturer, it is slightly expensive, but you can use it with other tools so you do not regret it. Building is the best. View detail

[ -- the Webike Monitor ] -- it is profound and there is a feeling of a tool. possessiveness is fulfilled.

[ -- the Webike Monitor ]
-- it is profound and there is a feeling of a tool.
possessiveness is fulfilled. View detail