【amon】Coupler 2-Pole Review
The White Coupler which was visible from the gap turned out inconspicuous
【What made you decide the purchase?】
I installed it in MT-09 of the 2014 model.
ETC and LED Headlight Bulbetc. By attaching the outside part of Blinker, White Coupler of Blinker was pushed and it became to see fly from the gap between Headlight and Front fork.
In order to make it inconspicuous, I found Emon's Black Coupler and purchased it at the place where I was thinking whether to paint the Coupler Black or roll the Tape.
【How was it actually used?】
Since the Coupler itself became black, it became inconspicuous even if it looked like a chiller from the gap of Headlight part. Although I am self-satisfied, it was a part I had been worried about so it was really good to exchange.
Compared to the OEMCoupler of the car link MT - 09 's Blinker connection, the internal terminal can be easily attached and detached, so Maintenance is improved.
Also the attachment / detachment of the Coupler itself is also better than the OEM Coupler, the shape of the Stopper is good or detachment is Smooth.
【Mounting was difficult?】
Since the terminal comes with Set, Electric Works Pliers 1 pc can be installed by anyone.
In the case of replacing from existing Coupler as in my case, disconnect from the root of Wiring of the existing Coupler and fix the terminal Crimp, or remove the existing Coupler with the dedicated Coupler removal tool or Minus Precision Driver You can complete it by entering the new Coupler.
However, since the terminal on the body side of my MT - 09 was a standard that does not correspond to Emon 's Coupler, only the terminal on the car body side was fixed Crimp.
【Please tell me the installation point and hang】
Although my car may be the only car, Wiring on the car body side thinks that it is often thin in the case of Large resistance, so when you crimp the terminal to Wiring on the car body side the terminal is securely fixed to Wiring Let's be careful with Crimp.
[Is there anything I was disappointed about?]
None. The black coupling is very satisfying because it is something I do not see much..
【Hope for Manufacturer - Please let me know if you have any improvement points]
None.
【Have you compared items?】
None.
[Others]
This Coupler is expensive if it is simply for Repair purposes. Automobile - In specialty shop dealing with electric equipment of Motorcycle, items of the same shape of White color can be purchased at less than half price.
In my case I think that it is a completely self-satisfying world because I bought only White Coupler from the outside to make it inconspicuous, but I would like to keep up with these details as long as Custom cars are custom-shaped Thing.
Responses
Other reviews
Service Reminder Reset for New Model GSX1300R HAYABUSA
[How is it used?
Recently, many manufacturers have adopted a system in which the Lamp on the Meter lights up when it is time for maintenance.
Various foreign car manufacturers, especially Ducati, are doing this.
But recently, domestic cars are also becoming like that:you have to drop Gold to the Dealer to get rid of the Lamp. Is this part of the Dealer's business strategy? So, even for a simple oil change, if you don't go to the Dealer to have it done, the maintenance Lamp is still glowing all the time.
is Japanese pampas grass, a simple homemade one is all that is needed to solve the problem.
Was the one you received as per Image?
As per Image
It's better to buy it with other things. Since it's only about $100 anyway, the actual store is a better deal when shipping is included.
How was your experience with it?
Effective.
[Points to note]
You have to insert it deep to get it to work.
How did it compare to other products?
Nothing in particular to compare.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
In doing the work, this method is probably a maintenance procedure that is not covered under warranty.
If you want to be stingy with your Gold, please use it only as a reference.
If you are a little worried about the work, you should still buy the OEMReset switch.
OEM reminder Reset switch
09930-83130 Available at Webike, but currently out of stock?
By the way, in most cases, they fail.
It will not respond unless it is inserted firmly and deeply.
Then press and hold the LeftSelectSwitch▼Button to open MENU, select SERVICE, MODESwitch to determine RESET, which is not usually displayed, select Yes when Yes/No appears, and then you can set it individually!
View detail
For ServiceReset
Recent SEA BASS cars have a sign in the meter reminding the driver to change the oil.
I thought the only way to erase it was to have it reset at the shop, but it was easy even for an individual.
The connector hole was too small and the needle gold was too thick to fit in the connector, so I used Emon terminals.
OEMs sell specialized products, but they are expensive, so this was sufficient.
View detail
When a blinker is changed for an external article, it purchases in order to relieve attachment and detachment of wiring which had become plug connection. Case 1 formula and the terminal + reserve are contained.
When a blinker is changed for an external article, it purchases in order to relieve attachment and detachment of wiring which had become plug connection.
Case 1 formula and the terminal + reserve are contained.
View detail
The Connector found when looking for so that it might be usual in a Home center. It is cheap and easy-to-use, and since load is not applied to a Cable when extracting like a plug, it is dramatically effective. Although he thought that it
The Connector found when looking for so that it might be usual in a Home center.
It is cheap and easy-to-use, and since load is not applied to a Cable when extracting like a plug, it is dramatically effective.
Although he thought that it did not remove, it was used for the power cable of a strobo unit.
View detail
The hot grip of the type wound around a grip is attached to my motorcycle. When summer came, since the hot grip did not have necessity, with the coupler, it thought that it would make attachment and detachment possible, and used. It is, if uneasy
The hot grip of the type wound around a grip is attached to my motorcycle.
When summer came, since the hot grip did not have necessity, with the coupler, it thought that it would make attachment and detachment possible, and used.
It is, if uneasy just for a moment although I think that it is probably satisfactory in order that there may be no lock mechanism although specification was able to be used very easily.
there was the necessity for press-fit previously through wiring by the side of a receptacle, and when explanation of the neighborhood was clarified (conspicuous -- as), I thought good kana.
At this price, a lock mechanism and an explanatory note may be difficult.
Since it was the above touch, the three stars was used.
View detail