【DILTS JAPAN】ENIGMA Injection Controller Review

It's interesting.

When I am doing various setting of the drive system, the rpm range to use is changing, and I want to turn a little more pleasantly at the top, I want a little more Torque at the start, and I want a little more Punch at the time of acceleration. The dissatisfaction remains a little.
So I decided to give this product a try, but I think I was thinking about 6 months because of the price.
As for the installation, it is almost a Couplet-on. There are no good places to install it, so I used a Tie Wrap to tie it to the 6V MONKEY/GORILLA Main Harness.
It's an actual adjustment, but for Addressv125s it can't be adjusted to the weight loss side. I think that is MinusPoint. You can't set the ignition timing, but you can set the Rev limit.
What I found interesting is that there is an acceleration pump function. This works surprisingly well.
Setting inevitably requires an A/F ratio gauge, but Tachometer and Throttle opening can be checked on the screen of your smartphone.
BlueTruce connection, but it is cut off when you are about 1.5m away.
By the way, I adjust my AFR between 12.7 and 13.1.
When I use it, it's 50/50 between being a pain in the ass and being funny. View detail

I also tried other, but it is best for now.

CYGNUS X 3 type
Engine 125 cc ~ 156 cc (High-compression) , Idling is unstable, there are times when the Engine stops when opening Axel,
I added an injection controller, but I did a whole fuel up, but Idling is still a bit unstable so I searched for another controller and found Enigma's Controller
When I got it, Idling was able to set to Smooth from low speed to high speed steadily.
Also, until now, setting for acceleration, High Speed ??Oriented setting has been Weight Roller, but to some extent Weight Roller (Now 10 g × 6) If you decide, you can do it with a smartphone, so it's convenient. View detail

It does not work properly

The purchase is already the fourth one
Because the third one was only able to do Idling, I bought the fourth one, but it did not turn around until only 8,500 revolutions from the beginning.
Please prepare for us to waste and purchase View detail

I think that it is necessary after Bore up

After Bore up, change intake / exhaust and BigInjectionetc. We introduced Deagar with Diagram Tool in Dealer and attempted to set the fire setting but when we were riding with heavy duty without the setting we finally got completely bad and the engine stopped running
I bought the Enigma I was worried about before. Movie etc. As you refer to the confirmation of the burning color of the Plug while doing some sort of digging Enigma I got the engine also came back. Engine was not running due to too much fueling, but Enigma was comfortable as it can easily adjust the flame using Bluetooth with smartphone. In the future, I will use Diagram Tool to consult with the store manager and think that I will boil down Setting.
Because Enigma seems to reduce how much fuel will be increased relative to NORMALECU's fire Graph
Basic Large Mild flammability Graph raises and lowers NORMALECU with Diagram tool
I think that it is fine tuning with Enigma.
BigInjection bought 160 cc, so I had to make it 120 cc ... I am raising the whole with Enigma now with NORMALInjection. Fine tuning is the goal with Enigma with Diagram View detail

CAUTION - Buy at your own risk. Software is stand alone software by Dilts-Japan Only and does not follow any industry standards. You would need to find someone factory trained in their software prior to set-up for this fuel controller. Very Poor Design as

CAUTION - Buy at your own risk. Software is stand alone software by Dilts-Japan Only and does not follow any industry standards. You would need to find someone factory trained in their software prior to set-up for this fuel controller. Very Poor Design as does not read /show AFR (Air Fuel Ratio). I had to return mine as I found No One knowledgeable in Dilts-Japan software and knew how to set-up their fuel controller that did not read AFR. Since knowing the AFR is the most critical in ECU set-up Dilts-Japan needs to go back to the drawing board and re-design their fuel modules. View detail