【ADIO】Fender Eliminator Kit Review
Refreshing a stretched out Rear Fender, looking young!
I bought the Fender Eliminator to make the rear view look more youthful
As expected of ADIO, the production is solid And it is safe because License Plate Light can be ported
There are two types of Reflector:one for OEM use and one for this purchase with Slim Reflector I have a thing, but it was about $1,000 more expensive because I wanted to give it a Refreshing feel! has made this product
The installation took about an hour
The instructions say to remove the tail lamp and cowl, but the Helmet in and Fender BoltQuantity:Remove the 2pc and you can get the Fender (requires a bit of a hang It's only at your own risk! (Laughs)
If you have come to this point, you can install this product and handle the wiring of the License Plate Light (Secure with Tie Wrap) and you're done
The position of the number can be fine-tuned so that it is in the center of the vehicle
My impression of the installation is that Parenthesis is better than I expected!
If you have a CALI Sticker plate, it may interfere with the vehicle depending on the direction of the plate I have changed the direction of the plate (I have to go get a sticker!) and it won't stick straight I changed the direction of the Plate to deal with it (I have to go get a sticker!)
Recommended for people who want to make their rear end refreshed and give a custom look !
Responses
Other reviews
18-year old BirdCity125 (SEC-1J) Fender Eliminator-ization of
I wanted to change the Fender Eliminator on my '18 BirdCity125 and move the RearCameraPosition on the DriveRecorder to the original Reflector position. I was also convinced that the size and design of the '17 BirdCity155 and the '18 BirdCity125 were the same, so I checked the specifications and looked at the rear view of both vehicles to make sure they were the same and purchased the kit.
The first thing that puzzled me when I received it was that it came with an LED License Plate Lamp.
I had ordered a KOSO Bracket with License Plate Light because I thought I had to prepare and install a License Plate Light separately when converting to Fender Eliminator! I had ordered a KOSO Bracket with License Plate Light, so I had to return that one!
When machining, the Fender is removed from the body and masked according to the Instruction Manual, then carefully cut using a blade for plastic or PPMaterial, and then file it with Paper No. 100 or higher to cleanly shape it.
For installation on the vehicle body, the License Plate is temporarily assembled, and holes are drilled after checking the position and levelness of the holes and marking.
The 7mm hole was specified, but I don't have one, so I used a 6mm drill and had no problem.
The holes drilled are also cleaned up with a stick File.
Wiring of License Plate Light is cut by Lamp side Limit of OEM License Lamp to use OEM Coupler and Wiring, and after wiring process, it is crimped to Female Bullet Type Terminal.
The wiring of the attached License Plate Light is also crimped to Male's Bullet Type Terminal, and since the wire is very thin, a solder is added to connect both.
The light came on safely when I installed it in the car body and turned on the main key to check the light.
Just to be clear, on the body side, Black is Minus and Blue is Plus.
On the License Plate Light side, Black is Minus and BlackWhite is Plus.
The wiring routing was done using the hole where the Reflector was originally attached, and the process was completed in the space on the reverse side of the Reflector.
After that, side cover, helmet in, etc. were all put back together, and this Bracket was finally combined with DAYTONA's with ReflectorLicense Plate Bracket and attached to the vehicle body to finish the work.
In summary, the License Plate Light is quite bright and the position of the light affects the RearCamera's image at night, making it appear bluish.
I have found that shading the tip of the camera lens with something that can be used as a flange will solve this problem, so I will take measures later.
I am very happy with the Refreshing Rear, which was heavy.
The drawback is that when the side cover is removed for maintenance or adjustment, the bracket is directly attached to the side cover, so it has to be removed, which increases the time and effort required.
As a supplement, it is not compatible with MODELs prior to 18.
Also, we do not know about BirdCity after Model change, so it is only BU54 (SEC1-J) Conformity with respect to (Diversion is possible.) Please understand that
View detail
US Buyers Read First
2016 Yamaha Zuma USDM. The part is very good. The fit and finish is fantastic and the install is pretty straight forward. BUT if youre in the US, this part will remove your OEM license plate light, so what you will need to do is cut the bottom oval of the black plastic tail light surround. The models outside the US have this precut, but we only have the outline. This will allow the tail light to serve as the license plate light. If you look at the description pictures on the listing, you'll notice the light hole. ALSO, the part is for plates somewhere outside the US therefore the license plate screw holes do not match up, you will need to re-drill two holes closer to the middle of the plates. I got the kit that ustilizes the OEM reflector, but shortly after install, I cut that bracket off for a reflector delete. View detail
Nice price, but the shape is good.
OEMFender to be removed and installed Type
Refreshing the best on the market.
All the back must be removed from the Seat to install it.
Large oddity.
By the way, there is no manual enclosed on how to remove it, so if you can't do it, pay the labor charge and have a PRO do it for you.
Reverse side is bare Wiring, but there is a Fender on the Tire, so it may be Large sturdy.
View detail
Question on quality
The thing is nice and cool, but the License Plate Light ran out halfway through the month. View detail
Parenthesis will be better, though.
I don't like the OEM chunky back, so I decided to Fender Eliminatorize it.
If you want to look cool or compete in the Race, I'll recommend you.
I ended up going back to OEM because I was worried about the Garbage jumping up.
good point
It becomes cool by making it to Fender Eliminator.
It doesn't look like a moped.
A reflector is also included for added safety.
Easy to install.
A bad point
Chatter sound around the Rear will increase.
● The mud bounces up.
It's difficult to balance parenthesis and practicality, and this product made me think about that.
View detail