【NTB】Seat Cover For Replacement Review
Fits: SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125 (Address)
Reupholstering Seat
Very good. The texture is also good, different from OEM.
If you can reupholster the seat and are looking for an OEM equivalent, this is it.
Responses
Other reviews
Seat cover
Size is also good and could be reupholstered. View detail
The price is cheap and easy to put up.
[How is it used?
I was looking for a for re-covering skin for my SEROW250 Seat Cover, which I bought used for playing in the mountains, because it had become hard and slippery due to age-related deterioration.
I was searching Webike because I don't want to use expensive Seat fabric since I fall down every time I go out to play in the mountains, and I found a lineup of Seat fabric for SEROW250 at NTB, which sells various compatible products at low prices.
2,482 yen at time of purchase (tax included) I ordered it thinking that at this price I would be able to give up if I went out to play in the mountains and was unlucky enough to tear the Seat after a few falls.
How did you like it?
The product we received was a little thinner than the Yamaha OEM, but the fabric was thick enough. The triangular-shaped front part of the seat was sewn three-dimensionally, and the quality of the product was very good.
Remove the OEM Seat Cover, place the NTB Seat Fabric on the Seat Base, wrinkle it lightly, and secure it with a Tucker. (If you have experience with Seat reupholstery) Seat can be reupholstered in Beauty with relative ease.
It is not an OEM fabric crimp type but a sewing type fabric, Seat reupholstered." It has so much QUALITY that you would not even notice it if you did not say so.
It also seems to be durable, so as long as it is not cut by excessive protrusions or blades, it will be as durable as OEM.
Because the fabric is newer, it is naturally more flexible and less slippery while riding. If you are not sure which one to choose when reupholstering your seat, NTB is a good candidate. Normal Fit to
How did it compare to other products?
SEROW was a popular vehicle and several companies had Seat Covers on the market, but NTB's low price was overwhelmingly competitive.
Universal Product. However, it would be difficult for other manufacturers to sell a 3D sewn product for SEROW250 at this price.
[Points to note]
Since the product is three-dimensionally sewn for the car model, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, and that is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
As I wrote above in a scattered manner, the shape is three-dimensionally sewn for SEROW250.
On top of that, the price is low.
[How is it used?
I use it in all kinds of situations, from riding around town to playing in the mountains to touring.
Seat grip is good and very comfortable.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
No Tandem belt (because the OEM SEROW does not have Belt) 。
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
It is a very good Seat fabric and I hope to use it again next time.
If possible, even if the price is a little higher, it would be more attractive if the seat surface is black and the SIDE is silver.
View detail
The price is cheap and easy to put up.
[How is it used?
I was looking for a for re-covering skin for my SEROW250 Seat Cover, which I bought used for playing in the mountains, because it had become hard and slippery due to age-related deterioration.
I was searching Webike because I don't want to use expensive Seat fabric since I fall down every time I go out to play in the mountains, and I found a lineup of Seat fabric for SEROW250 at NTB, which sells various compatible products at low prices.
2,482 yen at time of purchase (tax included) I ordered it thinking that at this price I would be able to give up if I went out to play in the mountains and was unlucky enough to tear the Seat after a few falls.
How did you like it?
The product we received was a little thinner than the Yamaha OEM, but the fabric was thick enough. The triangular-shaped front part of the seat was sewn three-dimensionally, and the quality of the product was very good.
Remove the OEM Seat Cover, place the NTB Seat Fabric on the Seat Base, wrinkle it lightly, and secure it with a Tucker. (If you have experience with Seat reupholstery) Seat can be reupholstered in Beauty with relative ease.
It is not an OEM fabric crimp type but a sewing type fabric, Seat reupholstered." It has so much QUALITY that you would not even notice it if you did not say so.
It also seems to be durable, so as long as it is not cut by excessive protrusions or blades, it will be as durable as OEM.
Because the fabric is newer, it is naturally more flexible and less slippery while riding. If you are not sure which one to choose when reupholstering your seat, NTB is a good candidate. Normal Fit to
How did it compare to other products?
SEROW was a popular vehicle and several companies had Seat Covers on the market, but NTB's low price was overwhelmingly competitive.
Universal Product. However, it would be difficult for other manufacturers to sell a 3D sewn product for SEROW250 at this price.
[Points to note]
Since the product is three-dimensionally sewn for the car model, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, and that is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
As I wrote above in a scattered manner, the shape is three-dimensionally sewn for SEROW250.
On top of that, the price is low.
[How is it used?
I use it in all kinds of situations, from riding around town to playing in the mountains to touring.
Seat grip is good and very comfortable.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
No Tandem belt (because the OEM SEROW does not have Belt) 。
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
It is a very good Seat fabric and I hope to use it again next time.
If possible, even if the price is a little higher, it would be more attractive if the seat surface is black and the SIDE is silver.
View detail
If it tears, replace it immediately.
SEA BASSLETS CA4AA Purchased to replace a tear in my H30 Seat due to age.
It is inexpensive to buy, and if you see signs of tearing, you should replace the Cushion's Urethane before the rain gets to it.
Unlike OEM, there are seams everywhere. OEM is completely seamless.
If there is concern about flooding through the seams, we recommend replacing the entire unit with OEMSeat.
Some prep work is required to increase Waterproofness.
(Seams are treated with Coking from the back, wrapped with WaterproofSeat and then installed. (The last step is to wrap the seam with WaterproofSeat and apply WaterproofSpray.)
The product is folded upon arrival, so we would like time to stretch it a bit.
You may want to schedule enough time to hang the aforementioned seam Coking until it dries.
Minor wrinkles in the product will disappear as it is pulled when applied.
You may notice Large cross fold creases as shown in the photo, but they disappeared within a week of practical use.
If the actual reupholstering process is followed as described on NTB's website, even beginners can achieve a relatively good finish.
It is for beginners because it is not a one-shot game and can be redone several times.
Even without an Air Tucker, a commercially available Gun Tucker can be used for hammering if pressed firmly enough.
However, be careful with the length of the wick leg; 8mm will cause it to penetrate and prick the leg.
It was just barely 6mm foot.
View detail
Seat reupholstering of moped
The texture is almost the same as OEM. The reupholstery process was also not confusing because of the instructional video.
It's been about half a month and no sagging. 。 It is a very comfortable seat.
View detail