【DAYTONA】Wire Twister Pliers (Auto Return Type) Review

Excellent and easy to use!

I used to borrow tools that belonged to friends to work with, but I wanted a tool that was exclusive to me, so I bought one.
I am satisfied with the quality and feel of the product and the Large change without any problems.
It's nice to have it in my toolbox so I can work on it whenever I feel like it, even in the middle of the night. View detail

good product,Just as nice as the ones I paid double for

Definitely a luxury item, but worth it in my opinion. They make installation a breeze and work exactly as you would hope. This is a great tool to have in the toolbox. As soon as I received it, I immediately used it to safety wire some new grips and, while manually twisting the old way with needle nose vice grip pliers wasn't a chore, it was significantly quicker and more consistent. My only gripe about this tool is the little handle on the end that you need to grab and pull down in order to twist the wire. Maybe it's just me, but because it is smooth and small I had a very hard time grabbing and pulling on the handle. I needed to use a set of needle nose pliers to grab and pull down. The cutter isn't amazing and for sometimes reason it doesn't run close enough to the pivot point Not a deal breaker by any means, but that was one complaint I had f this handle was longer and/or knurled, it would easily be a 6-star tool. :) View detail

Items that make you feel like you are in a race, and are fun to work on.

Custom is self-satisfied.
Rear Sets" Brake lever." Suspension.
There are a lot of functional customs, but I think most of them are not fully used.
In the first place, a 1000cc SS is the most useless feature.
But people yearn for functional Custom. I am one of them.
Since no one is proficient in using it, it is normal to want to improve the appearance of the Parenthesis and increase the Tension.
[Intended use]
I bought it because I wanted to feel a little Race ish with Custom.
Was the one you received as per Image?
More than Image.
No problems with the make and function.
I wasn't worried at all because it is MAJORBrand.
No problems as expected. I mean, the surface finish is one of the cleanest of the tools.
How was your experience with it?
In other people's imprints "Hard" However, I think this level is within the acceptable range because the reaction force that grabs Wire and does not let go is necessary.
[Points to note]
There is nothing to note as a tool.
However, the stainless steel wire for wiring has a sharp cut surface and is of a certain thickness, so if you try to bend it by hand, it will easily get stuck in your fingers.
Naturally, it is easy to catch the hem of jeans, etc.
So, the last Wire end section fold processing is a Large cut.
[To be prepared].
1.Wire twister (this product)
Stainless Steel Wire
3. WiringBracket (Plate to stop Wire)
Oil filler cap or drain bolt with 4.5 holes
Filler caps can also be drilled in OEM.
Procedure and hang]
1.Cut the wire a little longer than necessary.
*Too long also reduces workability.
Start wiring from one of the holes of the oil filler cap so that the tension is applied in the tightening direction (Right rotation). In this case, the wire is passed through the hole on the Right Side of the filler cap.
3. It is good to twist to the hole limit of the WiringBracket, but it will be a little shorter when twisted, so calculate that and grab it a little longer than the hole.
4. After deciding the length to twist and clamping the wire, grip the pliers tightly and press down the silver part in the middle to lock the wire in the clamped position.
5. Now comes the fun part:twisting. Pull the bottom silver part and twist the wire by snapping round and round, round and round. At this point, if you twist too much for fun, the wire will break. Start over.
If the length to the plate is just right, insert one end of the wire into the hole in the plate and twist to fix it in place.
This time, I made a slight modification:I let both wires through and then folded one wire over and let it pass under the original wire before stopping it with a Twist.
7. Cut to a certain degree and fold back with pliers to hide the cut end. Repeatedly bending and stretching because the folding is not going well will result in a cut. Start over.
[Impressions and satisfaction
The difficulty level is not too high, so the work itself is enjoyable.
Whether you are going to Circuit or not, this is a CustomTool that will make you feel Race ish.

Excessive twisting or repeated bending and stretching can lead to breakage. Do not overdo it. Positioning, folding, and completing everything in one go is hang. View detail

DAYTONA Wire Twister Pliers

About quality and texture - Top quality. Solid steel construction with firm spring action for the locking and twist operations. About the feeling of use - Have used them on my motorcycle and place of primary employment and they work flawlessly everytime. Products to buy together - A large roll of locking wire is advisable to also purchase if you intend on using these frequently. Difficulty of installation - Using these wire twister pliers is simple but locking as a task can somethimes be challenging depending on the location. The more you do, the better you'll get at it. Cost performance and comparison with other products - Very well priced for a top quality tool that does what you ask of it. No need to look elsewhere unless you are looking for reversible wire twister pliers. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - These pliers come in different sizes and with different features like auto return and the ability to operate in both directions. Research what best suits your needs. View detail

Very easy to use

Easy and convenient to Twist Wire
Used for Exhaust System Wiring View detail