【KITACO】Non-fade Disc Pad Review
Fits: KAWASAKI EPSILON150, SUZUKI G, SUZUKI G LIMITED 05-08 (Model:CF46A FNO. CF46A-100001-) for Front, SUZUKI G LIMITED 09 (Model:CF4EA Frame NO:CF4EA-100047-) for Front, SUZUKI ZZ, SUZUKI ZZ, SUZUKI ADDRESS110, SUZUKI ADDRESS110, SUZUKI Address50, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESS V50(2Cycle), SUZUKI AVENIS125, SUZUKI AVENIS150,
KITAKO Brake Pad Cost and feel of the pad is important.
[How is it used? I commute 80% of the time.
Was the one you received as per Image? I've been using the same one for a while now.
Was the installation difficult? If you are used to replacing the pad, it will be a piece of cake. If you're new to this, work carefully!
How was your experience with it? The durability and Cost Balance is good, and it works and stops properly, so no problem!
[Included Parts:were they on? Pad is only 1 Caliper-min
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
This time, I prepared a new pad to replace the brake hose with stainless mesh one. The brake fluid will also be replaced, so it's also to get the right amount of fluid. I also put a thin layer of grease on the back plate to stop the squeal, and shaved the edge of the pad for chamfering. I also shave the edge of pad for chamfering. It's good to check what you need for replacement work and prepare for it.
Responses
Other reviews
Very good disc pad
Very good quality pad if compare with standard. Price also very reasonable. Shipment also very fast and good packaging! View detail
Easy to use
I am using it on a SPACY 100 that I purchased used.
I replaced the NORMALPad that originally came with it with this one because it was getting low.
It works straightforwardly in proportion to grip strength, but my personal preference is that it would be very easy to use if it had a little more initial braking force.
I use it only for city driving, but I think it works normally and stopping normally is a Large thing.
It is durable and a reliable manufacturer.
View detail
I use it on my Ape100 with NSR50 suspension
I think it works like DAYTONA's Red.
I just installed it, so I'll see how durable it is, but it's inexpensive and I'll be able to change it from time to time.
View detail
No problem
I poned it up without replacing the Rotor, but the bite was no problem.
Braking power feels a bit higher than OEM & hellip; just a bit more than OEM.
There is no abruptness in the way it works, and it's controllable because it only works as much as you grip it from the start.
As a replacement from the OEM, it works without complaint.
If you need more potency, you can choose something else.
View detail
It's usually safe.
I bought some inexpensive Brake Pads from a mail order site and they didn't work at all, so I immediately replaced them with these pads. Nothing special in terms of normal workability, but I should have bought my trusty Manufacturer from the start. For the price of this performance, it's cheap. View detail