- หน้าแรก
- อะไหล่แต่ง
- แฮนค์/อะไหล่แฮนค์
- จุกอุดปลายแฮนด์
- Highsider
- Highsider: Tetra ตุ้มปลายแฮนด์
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[หมายเลขชิ้นส่วนผู้ผลิต]: 161-314 [Manufacturer Part No.] : 161-314รายละเอียดคำถาม
Highsider Tetra Bar End Heads, Bead Black Black Finish Finish ด้วยน้ำหนักแท่งที่โดดเด่นเหล่านี้ด้วยการติดตั้งกระจกมือจับปลายมือคุณสามารถออกแบบรายละเอียดจักรยานของคุณตามความคิดของคุณ ชิ้นส่วนปลายเหล่านี้ใช้สำหรับ Highsider ทั้งหมด & amp; กระจกหน้าปัดชินโย่พร้อมที่ยึดด้านนอกมือจับ มือจับปลายยังให้บริการเพื่อลดการสั่นสะเทือนที่น่ารำคาญบนมือจับ ขอบคุณระบบหนีบที่มีแขนเสื้อที่แตกต่างกันเป็นสากลเหมาะสำหรับ 7/8 (Φ 22 มม.), 1 นิ้ว (Φ 25, 4 มม.) หรือ X-Bar (Φ 28, 6 มม.) ด้วยเส้นผ่านศูนย์กลางภายในจาก 12 ถึง 22 มม. เคล็ดลับอุปกรณ์เสริมของคุณ: ยอดเยี่ยมเมื่อรวมกับกระจกมือจับที่มีชัยชนะบนยอดเขาที่ยอดเยี่ยมจาก บริษัท ของเราเอง หากคุณต้องการสลับกลับไปที่กระจกแฮนด์บาร์คุณสามารถใช้วงแหวนสีที่มีตัวเลือกได้อย่างง่ายดายแทนกระจกมือจับปลายและตั้งสำเนียงสี วงแหวนสีจะถูกผลักไปที่ปลายมือจับและยึดด้วยสกรูด้วงที่อยู่บนวงแหวน Dimensionsbar End Weights: เส้นผ่านศูนย์กลาง: 34.4 mmwidth: 20 mmtake ขึ้นสำหรับกระจกปลายแฮนด์ ของอุปทาน: 1 คู่รวม 2 ปลอกยึดด้วย Φ 12 และ 16 mmeach 2 spacer sleeves พร้อม Φ 14, 18 และ 21 mm2 x M6 Central Screws2 x M6 Nutsnote: สำหรับน้ำหนักปลายแท่งด้วยระบบหนีบปลายมือจับต้องไม่ถูกบล็อกโดยเม็ดมีดเกลียวหรือที่คล้ายกันปลายไม่จำเป็นต้องได้รับการอนุมัติ ต้องการเครื่องหมายการทดสอบใบรับรองหรือ ABEs
*สินค้านำเข้าโดยตรงจากยุโรป HIGHSIDER TETRA Bar End Weights, bead blasted black satin finishWith these striking Bar End Weights with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces are used for all HIGHSIDER & SHIN YO handlebar end mirrors with handlebar outer clamp. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to clamping system with different sleeves universal suitable for 7/8 (Φ22 mm), 1 inch (Φ25, 4 mm) or X-Bar (Φ28, 6 mm) tube handlebars with an inner diameter from 12 to 22 mm.Our accessory TIP:Excellent in combination with the striking HIGHSIDER VICTORY-BLAST handlebar end mirrors from our own company. If you do want to switch back to handlebar mirrors, you can easily use the optionally available coloured rings instead of a handlebar end mirror and thus set colour accents. The colour rings are simply pushed over the end of the handlebar and fastened with the grub screw located on the ring.DimensionsBar End Weights:Diameter: 34.4 mmWidth: 20 mmTake up for handlebar end mirrors with external clamping:Diameter: 29.90 mmWidth: 12 mmScope of supply: 1 pair incl.Each 2 clamping sleeves with Φ 12 and 16 mmEach 2 spacer sleeves with Φ 14, 18 and 21 mm2 x M6 central screws2 x M6 cone nutsNOTE:For Bar End Weight with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.Steering ends do not have to be approved, therefore do not require any test marks, certificates or ABEs.
*Products are directly imported from Europe.
*สินค้านำเข้าโดยตรงจากยุโรป HIGHSIDER TETRA Bar End Weights, bead blasted black satin finishWith these striking Bar End Weights with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces are used for all HIGHSIDER & SHIN YO handlebar end mirrors with handlebar outer clamp. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to clamping system with different sleeves universal suitable for 7/8 (Φ22 mm), 1 inch (Φ25, 4 mm) or X-Bar (Φ28, 6 mm) tube handlebars with an inner diameter from 12 to 22 mm.Our accessory TIP:Excellent in combination with the striking HIGHSIDER VICTORY-BLAST handlebar end mirrors from our own company. If you do want to switch back to handlebar mirrors, you can easily use the optionally available coloured rings instead of a handlebar end mirror and thus set colour accents. The colour rings are simply pushed over the end of the handlebar and fastened with the grub screw located on the ring.DimensionsBar End Weights:Diameter: 34.4 mmWidth: 20 mmTake up for handlebar end mirrors with external clamping:Diameter: 29.90 mmWidth: 12 mmScope of supply: 1 pair incl.Each 2 clamping sleeves with Φ 12 and 16 mmEach 2 spacer sleeves with Φ 14, 18 and 21 mm2 x M6 central screws2 x M6 cone nutsNOTE:For Bar End Weight with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.Steering ends do not have to be approved, therefore do not require any test marks, certificates or ABEs.
*Products are directly imported from Europe.
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/