- หน้าแรก
- อะไหล่แต่ง
- แฮนค์/อะไหล่แฮนค์
- ข้อต่อกระจก
- Highsider
- Highsider: กระจกปลายแฮนด์ Adapter for LED
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[หมายเลขชิ้นส่วนผู้ผลิต]: 161-002i [Manufacturer Part No.] : 161-002Iรายละเอียดคำถาม
อะแดปเตอร์ Highsider สำหรับ Mirrors ปลายแฮนด์ LED
ระบบหนีบทดแทนสำหรับ Highsider vitory, Highsider Montana หรือ Highsider Conero Handlebar Mirrors พร้อมแสงไฟ LED หมุดเกลียวมีรูสำหรับสายเคเบิล เหมาะสำหรับการติดตั้งบนแฮนด์บาร์ที่มีเส้นผ่านศูนย์กลางด้านใน 12-22 มม. เช่นอลูมิเนียมหรือเหล็กแฮนด์บาร์สเตอรี่ 7/8 และ 1 นิ้ว เนื้อหาในชุดสำหรับกระจกเดียว
ขนาด:
ความยาว: 67 มม.
เส้นผ่านศูนย์กลาง: 22 มม.
ขอบเขตของการจัดหา: ตั้ง (สำหรับกระจกหนึ่งกระจก)
ปลอกยึด
แขนเสื้อ
M6 สกรูกลาง
น็อตกรวย M6 M6
*สินค้านำเข้าโดยตรงจากยุโรป HIGHSIDER adapter for LED handlebar end mirrors
Replacement clamping system for HIGHSIDER VITORY, HIGHSIDER MONTANA or HIGHSIDER CONERO handlebar end mirrors with LED lighting. Threaded pin is provided with a hole for the cables. Suitable for mounting on handlebars with an inner diameter of 12-22 mm, i.e. for most 7/8 and 1 inch aluminium or steel handlebars. The content in the set is for one mirror.
Dimensions:
Length: 67 mm
Diameter: 22 mm
Scope of supply: Set (for one mirror)
Clamping sleeve
Distance sleeve
M6 central screw
M6 cone nut.
*Products are directly imported from Europe.
ระบบหนีบทดแทนสำหรับ Highsider vitory, Highsider Montana หรือ Highsider Conero Handlebar Mirrors พร้อมแสงไฟ LED หมุดเกลียวมีรูสำหรับสายเคเบิล เหมาะสำหรับการติดตั้งบนแฮนด์บาร์ที่มีเส้นผ่านศูนย์กลางด้านใน 12-22 มม. เช่นอลูมิเนียมหรือเหล็กแฮนด์บาร์สเตอรี่ 7/8 และ 1 นิ้ว เนื้อหาในชุดสำหรับกระจกเดียว
ขนาด:
ความยาว: 67 มม.
เส้นผ่านศูนย์กลาง: 22 มม.
ขอบเขตของการจัดหา: ตั้ง (สำหรับกระจกหนึ่งกระจก)
ปลอกยึด
แขนเสื้อ
M6 สกรูกลาง
น็อตกรวย M6 M6
*สินค้านำเข้าโดยตรงจากยุโรป HIGHSIDER adapter for LED handlebar end mirrors
Replacement clamping system for HIGHSIDER VITORY, HIGHSIDER MONTANA or HIGHSIDER CONERO handlebar end mirrors with LED lighting. Threaded pin is provided with a hole for the cables. Suitable for mounting on handlebars with an inner diameter of 12-22 mm, i.e. for most 7/8 and 1 inch aluminium or steel handlebars. The content in the set is for one mirror.
Dimensions:
Length: 67 mm
Diameter: 22 mm
Scope of supply: Set (for one mirror)
Clamping sleeve
Distance sleeve
M6 central screw
M6 cone nut.
*Products are directly imported from Europe.
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/