- หน้าแรก
- เครื่องมือ
- เครื่องมือไฟฟ้า
- SK11
- SK11: ดอกสว่านสำหรับเจาะคอนกรีต
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[วัสดุ]เหล็กพิเศษ
[คุณสมบัติของผลิตภัณฑ์]
ขนาด : 4.0 มม
เพลาหกเหลี่ยม 6.35 มม [Material]
・Special steel
[Product Specifications]
Size: 4.0mm
6.35mm hexagonal shaft
[Standard] 4.0mm
รายละเอียดคำถาม
นี่คือสว่านคอนกรีตเพลาหกเหลี่ยมที่สามารถใช้ได้โดยติดเข้ากับไขควง 4 โหมดของ Makita และอื่น ๆ ...
[ใบสมัคร]
เจาะคอนกรีตบล็อกปูนและเตียงแม่น้ำ
[คุณสมบัติของสินค้า]
สว่านคอนกรีตชนิดเพลาหกเหลี่ยมสำหรับการติดตั้งแบบสัมผัสเดียว
สามารถใช้กับสว่านสั่นสะเทือนธรรมดาได้
เพลาหกเหลี่ยมป้องกันการเลื่อนหลุดของแกน ..
เมื่อเทียบกับดอกสว่านไดรเวอร์แบบชาร์จไฟทั่วไปมุมของคมตัดได้รับการทำมุมป้านและใกล้เคียงกับการตัดแบบสมมาตรซึ่งช่วยเพิ่มความทนทานในโหมดการสั่น ..
เมื่อใช้กับตัวขับแรงกระแทกสำหรับบล็อกและปูน .. This is a concrete drill with a hexagonal shaft that can be attached to a Makita 4-mode driver or similar.
[Use]
Drilling holes in concrete, block, mortar and straw.
[Product Features]
The hexagonal shaft type concrete drill allows one-touch installation.
It can also be used for ordinary vibration drills.
The hexagonal shaft prevents shaft slippage.
Compared to the conventional rechargeable driver drill bits, the cutting edge angle has been made obtuse and the cutting edge has been symmetrically cut to improve durability in vibration mode work.
When used with an impact driver, it is for use with blocks and mortar.
คำเตือน
* โปรดตรวจสอบใบมีดเนื่องจากอาจทำให้เกิดการบาดเจ็บได้หากมีรอยแตกหรือ choker อยู่ในใบมีดก่อนที่จะติดตั้งใบ. โปรดแน่ใจว่าได้ทดสอบการทำงานก่อนทำงานและตรวจสอบใบมีดเจาะว่าเบลอหรือไม่และเชยอีกครั้ง* โปรดหลีกเลี่ยงเมื่อทำงานใกล้กับของเหลวหรือก๊าซไวไฟเนื่องจากอาจเกิดอันตรายจากไฟไหม้หรือการเผาไหม้. กรุณาเพิ่มความสว่างเพื่อให้สามารถมองเห็นพื้นที่เจาะได้ชัดเจนในที่กว้าง
* กรุณาอย่ายื่นมือเข้าใกล้สว่านเมื่อทำงานหรือชี้ใบมีดไปที่คนรอบข้าง. หลังจากเจาะจะร้อนและมีอันตรายจากการไหม้ได้ดังนั้นโปรดอย่าสัมผัสด้วยมือเปล่า *Inspect the blade before installing the blade, as any cracks or chips in the blade may result in injury.Always perform a test run before starting work.Check that the drill blade is not shaken and chuck it again.
*Do not work near flammable liquid or gas as it may cause fire or burns.Use a large, well-lit area so that the drilled area is clearly visible.
*Keep your hands away from the drill while working.Do not point the blade at the people around you.Do not touch the drill with bare hands immediately after drilling because it is hot and may cause burns.*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)