- หน้าแรก
- เครื่องมือ
- เครื่องมือช่าง
- เครื่องมือ ยิงรีเวท
- SK11
- SK11: เครื่องยิงริเว็ทและน็อต
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[คุณสมบัติของผลิตภัณฑ์]ขนาดหมุดตาบอด (เส้นผ่านศูนย์กลางหมุด) : 2.4 มม. ・ 3.2 มม. ・ 4.0 มม. ・ 4.8 มม
น็อตหมุดขนาด (เส้นผ่านศูนย์กลางของน็อต) : M4X0.7 ・ M5X0.8
มาตรฐาน] HR30N [Product Specifications]
Size of blind rivets used (rivet diameter): 2.4mm, 3.2mm, 4.0mm, 4.8mm
Nut rivet use size (nut diameter): M4 x 0.7・M5 x 0.8
[Standard] HR30N
รายละเอียดคำถาม
อุดรูรั่วได้ด้วยอันนี้ ..
[ใบสมัคร]
การยึดชิ้นส่วนเข้ากับวัสดุฐานและการทำรูน็อต (รูเกลียว) สำหรับแผ่นบาง ๆ ฯลฯ ..
[คุณสมบัติของสินค้า]
เมื่อเชื่อมต่อแผ่นเหล็ก ฯลฯ คุณสามารถเจาะรูในวัสดุฐานและวัสดุที่จะเชื่อมล่วงหน้าได้แม้ว่าวัสดุฐานจะปิดสนิทที่ปลายด้านหนึ่งจากนั้นติดตั้งหมุดตาบอดบนหมุดย้ำมือแล้วจีบเข้าด้วยกัน ..
คุณสามารถใช้หมุดย้ำและหมุดย้ำน็อตโดยการเปลี่ยนชิ้นส่วนจมูก ..
หมุดย้ำน็อตสามารถใช้สำหรับการขันสกรูบนวัตถุปิดผนึกที่ไม่สามารถเข้าถึงได้ด้วยมือหรือบนแผ่นเหล็กบาง ๆ ที่ไม่สามารถขันเกลียวได้ ..
เหมาะอย่างยิ่งสำหรับการติดตั้งหมุดและน๊อตบนผ้าคาดเอวประตูรั้วตะแกรงหน้าต่างรถยนต์ ฯลฯ Caulking and nutting it can be done with this one tool.
[Use]
Fastening of parts and base materials, making of nut holes (screw holes) in thin plates, etc.
[Product Features]
When joining steel plates, etc., even if one side of the base metal is sealed, you can drill holes in the base metal and the member to be joined beforehand, and to set blind rivets on a hand riveter and clamp them together.
By changing the nosepiece, blind rivets and nut rivets can be used.
The nut rivet can be used to screw into sealed objects that cannot be accessed by hand, or into thin steel plates that cannot be threaded.
Suitable for fixing rivets and nuts on sashes, gates, fences, window grates, cars, etc.
คำเตือน
* โปรดจับพวงมาลัยในกรณีที่เพลาไม่ทำงาน* กรุณาเปิดเพลาโดยเปิดพวงมาลัยหลังจากโลดโผน
* กรุณาทาจารบีตรงส่วนรอยต่อของด้ามจับเป็นประจำ. กรุณาถอดขากรรไกรออกอย่างสม่ำเสมอและทำความสะอาด. (ตอกหมุด). ไม่สามารถใช้กับหมุดสแตนเลส 4.8 มม. *If the shaft does not cut, regrip the handle.
*After caulking, twist the handle fully to release the shaft.
*Occasionally lubricate the joint part of the handle.The jaws should be removed and cleaned occasionally.(Riveters only).Not for use with 4.8mm stainless steel rivets.
ทบทวน
0.0
/ 5
(0 ทบทวน)