รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
Full ออกแบบพิเศษ
4 Handlebar ตำแหน่ง(Throttle Angle)Adjustable แบบ*The following is compared measurement to the STD Parts.
1. กว้าง30mmสั้น/สูง23mm Low/Opening 9mm Front(During Shipment)
2. It is slightly narrowing down 1 to a standard, and opening more distantly to 2 องศา corner depths.
3. It is close to the aperture angle 2-องศา in front on the basis 1 and it is slightly stop.
4. It is close to the most front aperture angle of 6 องศา on the basis of 1, and slightly squeezing it most (at the time of the central clamp part reverse).
4(7)pieces Assembly แบบ Structure
It has been adopted to the chromium molybdenum steel ตำแหน่งing pin.
Relaxation of excessive hard feeling and Lightweight reduction by lightening processing.
It is possible to reคู่ than bolt single item.
OEM Bar End Correspondence
It is a switch box ตำแหน่งing drilling already.
It does not require cable and hose replacement.
Full Exclusive Design
4 Handlebar Position(Throttle Angle)Adjustable Type*The following is compared measurement to the STD Parts.
1. Width30mmShort/Height23mm Low/Opening 9mm Front(During Shipment)
2. It is slightly narrowing down 1 to a standard, and opening more distantly to 2 degrees corner depths.
3. It is close to the aperture angle 2-degrees in front on the basis 1 and it is slightly stop.
4. It is close to the most front aperture angle of 6 degrees on the basis of 1, and slightly squeezing it most (at the time of the central clamp part reverse).
4(7)pieces Assembly Type Structure
It has been adopted to the chromium molybdenum steel positioning pin.
Relaxation of excessive hard feeling and Lightweight reduction by lightening processing.
It is possible to repair than bolt single item.
OEM Bar End Correspondence
It is a switch box positioning drilling already.
It does not require cable and hose replacement.
รายละเอียดคำถาม
`การแสวงหาธรรมชาตินำไปสู่ความสะดวกสบาย
ความรู้สึกแข็งกระด้างและการแสดงตนที่ท่วมท้นจะไม่ยอมให้ผู้อื่นได้รับ
If you can change the position to suit each rider.
The Aella adjustable handlebar is the realization of such a dreamlike mechanism.
It is machined from an aluminum ingot to ensure the necessary rigidity, and its powerful appearance is also the identity of AELLA parts.
The unique variable mechanism allows you to fine-tune the optimal position for each individual, making it dramatically easier to control the vehicle in urban areas and make U-turns.
Lighter weight and less overly hard feeling due to meat removal process.
This product can be repaired from a single bolt.
[Position]
4 Adjustable handlebar positions (aperture angle) (compared to stock below)
(1) Width 30mm short / Height 23mm low / Pull 9mm forward (at the time of shipment)
(1) with aperture angle 2° farther back and more open
(1) with aperture angle of 2° closer to the front and further aperture
(1) with aperture angle of 6° closest to the front and most aperture (as center clamp is inverted)
■About spacer size
The standard one is "2mm".
Also available in 7 and 12 mm.
คำเตือน
* สีของผลิตภัณฑ์ในภาพคือ : สีขาวโนไดซ์
*AELLA handlebar end slider is compatible with AE-68302.
*The image includes products with spacer size variations (4mm, 9mm, 14mm) of the previous specification.The current variations are 2mm, 7mm and 12mm.
*Images may contain other colors.
