ชุดสายไฟพร้อมชิลด์ LED FLH-533

Brightness beyond HID and even more power-saving

The input power is 28W and the color temperature is 6000K.As a rough guide of the brightness, it is equal or more than the brightness compared with 35W 6000K HID.
FLH-533 series and FLH-535 series are equipped with a light-shielding plate inside the lens to prevent glare.
*The brightness is the same for all series.

Suddenly bright and quick lighting!

Unlike HID, it lights up with full power immediately after power-on.Also, the color of the light does not change gradually like HID.

Adopts a battery-friendly automatic light reduction system!

Equipped with dimmer sensor (automatic light control system) and REV sensor (engine rotation sensor RSE-01).It automatically reduces the amount of light emitted by the LED in response to the ambient brightness during the day, so it functions as a daylight during the day and lights up at night with 28W full power.(The difference from the attenuated state is 5 times.In addition, by connecting the REV sensor (engine revolution sensor RSE-01), the light will be dimmed even when idling at a standstill, reducing the heat generated by the LED and the burden on the battery.

Forced air cooling by running wind type

Designed to cool the heat generated by the LED by exposing the entire unit to running air.When the vehicle is stopped, the light is reduced by 1/5 due to the REV sensor (engine rotation sensor), so it hardly generates heat.This product is designed to forcibly cool down the heat generated by the LED by exposing the entire unit to the running wind.For example, at a speed of 36 km/h, a 10 mph wind cools the car, so it generates almost no heat while riding.When the vehicle is stopped, the light is reduced by 1/5 due to the REV sensor (engine rotation sensor), so it hardly generates heat.

Designed to prevent running glare!

FLH-533 series and FLH-535 series are equipped with a light-shielding plate inside the lens to prevent glare.

More running units can be added!

By connecting the optional child unit (without REV sensor), the unit can be installed on both sides of the vehicle.

Die-cast body with high running quality

Image of the product (66535-D): the main unit is made of high quality die-cast.

Four types of directional mounting bolts with a choice of rides

This product has four types of mounting bolt directional variations to accommodate various installation situations for each vehicle, where the direction of the dimmer sensor and wiring is specified.