หน้าแรก

【Yamaha Europe】ชุดไฟเลี้ยว LED

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿4,027
คะแนนวีไบค์: 40

    • เลือกสินค้าจาก:
    • รหัสสินค้า:
    • Q5KYSK081X03

กรุณาเลือกตัวเลือกของสินค้า


ตรงรุ่น:

MT-09 17-21 B26 A

Applicable to 12V 10W only

ดูเพิ่มเติม

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

[วัสดุ] ABS
[ปริมาณ] 1 ชุด 2 ชิ้น.
[รวมอะไหล่] ความต้านทาน
[เวลาติดตั้ง] 0.3 ชม

[คำเตือน]

* คุณจะต้องดำเนินการต่อสายที่ด้านข้างรถ
* จำเป็นต้องใช้ 2 ชุดสำหรับหนึ่งคัน

[รายละเอียดสินค้า]

ไฟกระพริบใสที่บางและมีสไตล์พร้อมหลอด LED 9 ดวง
สีตัวถังมีสามประเภท : รูปลักษณ์สีดำโครเมี่ยมและคาร์บอน
คุณสามารถติดตั้งได้โดยไม่ต้องเปลี่ยนรีเลย์ไฟกระพริบ

ตรงรุ่น

    • MT-09 17-21 B26 A
    • Applicable to 12V 10W only

รีวิวสินค้า

    I bought a Carbon Style,
    Texture is the best.
    It works without problems with the attached Relay. Relay itself is not as big as it is told. In my case I put it in Space under Rear Sets.
    To good things, Quantity : 1 Set of 4pcs. I would like you to lower the price and sell it.

    Headlight, Tail lamp is a LED bulb, but it was only a light bulb, so I was concerned despite being invisible while driving, so I replaced it because of my mental health.

    I could work with Electric Works Pliers and Spanner, Socket wrench, Hexagon without feeling difficulties.
    In Front Side Panel's lining installation method, Washer with nails is bite in three places and I did not know how to officially remove this Washer, push up a little by little in the direction to remove the nail with a thinner Driver ahead Did.
    Washer with detached nails flattened the nails with Pliers and used again, but the problem was not felt in particular.

    Resistance is also attached to this product, and 4 places (Quantity : 2 Set) When exchanging Quantity : 2pc. Use Set resistance.
    Our tarcer has attached resistance to Rear blinker but in order to fit in the gap under Seat you need to warrange longer while tentatively assembling using Wiring of OEM's Blinker. If there is something to be aware of in installation it is about this.

    After installation, we are satisfied with OEM that Blinker got smaller and fearless and became fearless face. I can not see it while I am on the train - - -

    Headlight, Tail lamp is a LED bulb, but it was only a light bulb, so I was concerned despite being invisible while driving, so I replaced it because of my mental health.

    I could work with Electric Works Pliers and Spanner, Socket wrench, Hexagon without feeling difficulties.
    In Front Side Panel's lining installation method, Washer with nails is bite in three places and I did not know how to officially remove this Washer, push up a little by little in the direction to remove the nail with a thinner Driver ahead Did.
    Washer with detached nails flattened the nails with Pliers and used again, but the problem was not felt in particular.

    Resistance is also attached to this product, and 4 places (Quantity : 2 Set) When exchanging Quantity : 2pc. Use Set resistance.
    Our tarcer has attached resistance to Rear blinker but in order to fit in the gap under Seat you need to warrange longer while tentatively assembling using Wiring of OEM's Blinker. If there is something to be aware of in installation it is about this.

    After installation, we are satisfied with OEM that Blinker got smaller and fearless and became fearless face. I can not see it while I am on the train - - -

    There is only the option of EuropeYamaha OPTION, build, change to Large in design.
    Also, easy to understand manual Electric Works Pliers Others are attached to terminals, in Hemp palmkk,
    Besides, when exchanging with LED Blinker, it was easy to complete if you can crimp the terminal even with the Electric Works Pliers instead of the mandatory Relay instead of the Cement resistor.

    There is only the option of EuropeYamaha OPTION, build, change to Large in design.
    Also, easy to understand manual Electric Works Pliers Others are attached to terminals, in Hemp palmkk,
    Besides, when exchanging with LED Blinker, it was easy to complete if you can crimp the terminal even with the Electric Works Pliers instead of the mandatory Relay instead of the Cement resistor.

    I installed it in MT-25 of YAMAHA. Because Front was too long, it cuts a little and connects. Rear lacked Length, purchased separately Bullet Terminal and Wiring and extended. Resistance to Front LeftRight or RearQuantity : Pair (for Left and Right) I have to attach to. Just wrote that resistance has sometimes heat, Rear side is stored under Seat and Wiring is dense, so select Front side. However, the Front side did not have the space and had a bit of hardship.
    After installation it is moving normally. The appearance is smart. Just wish Cost will fall a little more. I think that it can not be helped because it is an OEM product. Comprehensively Large satisfied.

สินค้าที่มีผู้เข้าชมมากที่สุด

【POSH】LED Conversion kit
ชุดแปลงไฟ LED POSH MT-25
【POSH】LED Conversion kit (1 Set of 2pcs.)
ชุดแปลงไฟ LED POSH MT-25
【CNC Racing】Turn indicator FAST Led Approved
ชุดไฟเลี่ยว LED CNC Racing CBR600F
【CNC Racing】TURN INDICATOR SKY LED APPROVED
ชุดไฟเลี่ยว LED CNC Racing CBR600F
【CNC Racing】Turn indicator JET LED Approved
ชุดไฟเลี่ยว LED CNC Racing CBR600F
【New Rage Cycles】LED Replacement Turn Signals [578957]
LED Replacement Turn Signals [578957] New Rage Cycles MT-09 (FZ-09)
【POSH】Lightweight LED Turn Signal  Sequential Type Vehicle Exclusive Kit
Lightweightled Blinker Sequential Type Private Car Kit POSH MT-09 TRACER (FJ-09)