- หน้าแรก
- เครื่องมือ
- เครื่องมือช่าง
- เครื่องมือช่างอื่น ๆ
- VESSEL
- VESSEL: ไขควงลมเวสเซล แบบควบคุมแรงบิด GTS4TG
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[Bit Outlet (มม.)] 6.35[ขนาดความจุสกรู (มม.)] 2.0-2.5
[แรงบิดในการขันสูงสุด (N / m)] 0.8
[ความเร็วในการหมุนขณะไม่โหลด (นาที [1 Power]) )] 2300
[ปริมาณการใช้อากาศ ([ลูกบาศก์เมตร] / นาที)] 0.28
[ท่อเข้า] Rc1 / 4
[ระบบไอเสีย] ย้อนกลับ
[ความยาวโดยรวม (มม.)] 215
[ความเร็วในการหมุนขณะไม่โหลด (รอบต่อนาที)] 2300
[บิตที่สอดคล้องกัน] JAPAN Standard Type (13mm)
[ความดันอากาศที่ใช้แล้ว] 0.6MPa
[วิธีเชย] ประเภทบอลหยุดบิต
[น้ำหนัก] 0.65 กก
[ข้อมูลจำเพาะ] Push Start Type
[หมายเลขชิ้นส่วนของผู้ผลิต] GT-S4TG
[ประเทศต้นทาง] ญี่ปุ่น
[Bit insertion slot (mm)] 6.35
[Capacity screw size (mm)] 2.0-2.5
[Maximum tightening torque (N・m)] 0.8
[No-load rotation speed (min[[-1 power] ] )] 2300
[Air consumption ([[cubic meter]] / min)] 0.28
[Hose inlet] Rc 1/4
[exhaust] rear
[Total length (mm)] 215
[No-load rotation speed (rpm)] 2300
[Compatible bit] Domestic standard type (13mm)
[Operating air pressure] 0.6MPa
[Chuck method] Bit stopper ball type
[Weight] 0.65kg
[Specifications] Push-start type
[Manufacturer's part number] GT-S4TG
[Country of origin] JAPAN
รายละเอียดคำถาม
[คุณสมบัติ]
สามารถขันแรงบิดให้คงที่ได้ ..
เมื่อถึงแรงบิดที่ตั้งไว้ล่วงหน้าคนขับจะปิดอากาศโดยอัตโนมัติและหยุดการหมุนด้วยแรงบิดที่แน่นอน ..
[ใบสมัคร]
สำหรับสายการประกอบอุปกรณ์อิเล็กทรอนิกส์ .. [Features]
●Tightening can be done to a constant torque.
●When the torque reaches a preset value, the driver automatically shuts off the air and stops rotating at a certain torque.
[Use]
●In the assembly line of electronic equipment.
สามารถขันแรงบิดให้คงที่ได้ ..
เมื่อถึงแรงบิดที่ตั้งไว้ล่วงหน้าคนขับจะปิดอากาศโดยอัตโนมัติและหยุดการหมุนด้วยแรงบิดที่แน่นอน ..
[ใบสมัคร]
สำหรับสายการประกอบอุปกรณ์อิเล็กทรอนิกส์ .. [Features]
●Tightening can be done to a constant torque.
●When the torque reaches a preset value, the driver automatically shuts off the air and stops rotating at a certain torque.
[Use]
●In the assembly line of electronic equipment.
คำเตือน
* แรงบิดในการขันเป็นค่าไกด์ค่าแรงบิดถูกแทนที่ตามเงื่อนไข *The tightening torques are approximate values.The torque value may vary depending on the conditions.ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/