หน้าแรก

【G-Craft】จับหลังปรับระดับได้

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿3,922
ราคาเต็ม: ฿4,128 5% |
คะแนนวีไบค์: 40

    • รหัสสินค้า:
    • 33137

ระบบกำลังคำนวณวันที่พร้อมจัดส่ง.....


รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

A5252 วัสดุ
การขัด

[คำอธิบาย]

สำหรับลิงเท่านั้น
ที่นั่งแบบกำหนดเองของ G-Craft (หมายเลขชิ้นส่วน 33510, 33527, 33528, 33529)
การออกแบบพิเศษ
สามารถติดตั้งไฟท้ายและไฟกระพริบได้ตามปกติ
สำหรับรถที่ติดตั้งสวิงอาร์มยาว 16/20 ซม.

[คำเตือน]


* ภาพนี้ใช้สำหรับอ้างอิงเท่านั้น. อาจมีสี / ประเภทอื่น ๆ

ตรงรุ่น

รีวิวสินค้า

    I was expecting but I was sorry..

    Until now I have used a lot of G-craft Parts and have not failed.

    However, this time Large failed!
    As shown in the photograph, welding is sloppy, around the welding is white discoloration.
    The Instruction Manual is fairly tidy.

    Use OEM of 5 LMONKEY around Tail in this Parts.
    However, the three-stage Adjustable is said to be incompatible due to Blinker and others interfering other than the first one.
    Since there is only one option in the end, there is no meaning of Adjustable.
    Also, when installed normally, Blinker and Tail lamp warped up,
    It looks like a Chinese cheap Tail lamp.
    Since it can not be helped, I hit Base so that Tail lamp etc. become natural.
    Thanks to hitting you made 2 stages of choice out of 3 stages.
    So I made the position in the middle.

    By the way Adjustable can not change the position of Grab Bar Body! Let's be careful.
    So where is Adjustable?
    Tail lamp and Blinker can be positioned back and forth.
    In short, you can change the position considering Balance with Swingarm
    (I misunderstood that Grab Bar could move (sweat) )

    Moreover, the Bolt hole which holds the Tail lamp does not match the hole of Bracket of this product.
    So I drilled Bracket for this product.
    After all it will be less than an hour if installed normally,
    It took me three hours with full of machining (sweat)

    By the way, Frame of the mounting car body is AB 27.
    Is it impossible to attach a pon to this car body?

    Anyway it's expensive - Making is complicated - No machining and no good place!

    Was this a difference in my senses, I thought if the bar itself was a bit thicker, it was pretty slim.
    This is the difference of my feeling so I have not done it to MinusPoint.

    ☆ is two with Brand effect, Others is an evaluation saying nothing.
    In this case it's good for Chinese (Lol)

    I was expecting but I was sorry..

    Until now I have used a lot of G-craft Parts and have not failed.

    However, this time Large failed!
    As shown in the photograph, welding is sloppy, around the welding is white discoloration.
    The Instruction Manual is fairly tidy.

    Use OEM of 5 LMONKEY around Tail in this Parts.
    However, the three-stage Adjustable is said to be incompatible due to Blinker and others interfering other than the first one.
    Since there is only one option in the end, there is no meaning of Adjustable.
    Also, when installed normally, Blinker and Tail lamp warped up,
    It looks like a Chinese cheap Tail lamp.
    Since it can not be helped, I hit Base so that Tail lamp etc. become natural.
    Thanks to hitting you made 2 stages of choice out of 3 stages.
    So I made the position in the middle.

    By the way Adjustable can not change the position of Grab Bar Body! Let's be careful.
    So where is Adjustable?
    Tail lamp and Blinker can be positioned back and forth.
    In short, you can change the position considering Balance with Swingarm
    (I misunderstood that Grab Bar could move (sweat) )

    Moreover, the Bolt hole which holds the Tail lamp does not match the hole of Bracket of this product.
    So I drilled Bracket for this product.
    After all it will be less than an hour if installed normally,
    It took me three hours with full of machining (sweat)

    By the way, Frame of the mounting car body is AB 27.
    Is it impossible to attach a pon to this car body?

    Anyway it's expensive - Making is complicated - No machining and no good place!

    Was this a difference in my senses, I thought if the bar itself was a bit thicker, it was pretty slim.
    This is the difference of my feeling so I have not done it to MinusPoint.

    ☆ is two with Brand effect, Others is an evaluation saying nothing.
    In this case it's good for Chinese (Lol)

สินค้าที่มีผู้เข้าชมมากที่สุด

【TANAKA TRADING】Grab Bar with Steel Tail Mount
มือจับท้าย TANAKA TRADING GORILLA
【MINIMOTO】Retro Classic Grab Bar
กันตกคลาสสิค MINIMOTO GORILLA
【GM-MOTO】Rear Grab Bar Type C
จับหลัง Type C GM-MOTO MONKEY
【MINIMOTO】BasicGrab Bar
เหล็กจับกันตก MINIMOTO GORILLA
【SP Takegawa】Grab Bar
จับหลัง SP Takegawa MONKEY
【MINIMOTO】ClassicGrab Bar
กันตกคลาสสิค MINIMOTO MONKEY
【TANAKA TRADING】Grab Bar with Tail Mount (LED Cat-eye Tail)
เหล็กจับหลัง TANAKA TRADING MONKEY
【TANAKA TRADING】Brake Pedal Cover
หัวคันเบรค TANAKA TRADING BENLY CD50
【G-Craft】Grab Bar for 4L MONKEY
จับหลัง 4L MONKEY G-Craft MONKEY
【G-Craft】Grab Bar
จับหลัง G-Craft MONKEY
【MADMAX】Grab Bar
แกร็บบาร์ MADMAX MONKEY
【HURRICANE】Round Sissy Bar H500mm
กันตก H500mm HURRICANE MONKEY