หน้าแรก

【KIJIMA】หลอดไฟโครเมี่ยม

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿536
คะแนนวีไบค์: 5

    • รหัสสินค้า:
    • 217-6056

ระบบกำลังคำนวณวันที่พร้อมจัดส่ง.....


ตรงรุ่น:

Universal

ดูเพิ่มเติม

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

สำหรับ ด้านหน้า
จำนวน: 2ชิ้น.
หลอด Mimic (หลอดชุบเงา)
แบบ: S25 21/5W
สี: ส้ม

[คำอธิบาย]


คลิกเพื่อดูแคตตาล็อก. P127:P112,P118,P129

[คำเตือน]

* ภาพถ่ายของผลิตภัณฑ์ใช้สำหรับอ้างอิงเท่านั้น

[รายละเอียดสินค้า]

ไม่มีการเปลี่ยนสีของวาล์วเมื่อปิดโดยทำกระบวนการชุบที่โปร่งใสกับพื้นผิวของวาล์วสี. มันเป็นการปรับแต่งขึ้นไปยังเลนส์ใส! มันเป็นส่วนหนึ่งของรูปแบบการแนะนำ. โปรดตรวจสอบคุณสมบัติของวาล์ว OEM สำหรับการปรับตัว

ตรงรุ่น

    • Universal

รีวิวสินค้า

    GSX1300R HAYABUSA ('16) I wanted to wear Plating Valve, purchase Mimic Valve that looks good in COSPA.

    For OEMPin angle 110 °, purchased ProductNo 217-6055 Mimic Valve is the closest "Pin angle 120 °" was.

    Replace Valve with one's own responsibility.
    I was able to exchange it without problems.
    It looks good, the feeling of use is satisfactory.

    GSX1300R HAYABUSA ('16) I wanted to wear Plating Valve, purchase Mimic Valve that looks good in COSPA.

    For OEMPin angle 110 °, purchased ProductNo 217-6055 Mimic Valve is the closest "Pin angle 120 °" was.

    Replace Valve with one's own responsibility.
    I was able to exchange it without problems.
    It looks good, the feeling of use is satisfactory.

    CUB is Lens is Clear but Valve is with Color.

    I did not understand the conformity, but I judged by the position of the bottom petit.

    I felt like I could assimilate with Reflector.

    The rest is durable.

    I hear that Mimic Valve is vulnerable to heat?.

    There is also a story saying that if you attach Position it will come off with heat.

    Left at the bottom of the photo is attached and Right is different in Size but it is the one before mounting.

    Because I forgot to take a picture before cutting and cut out from the movie, the size is different.

    CUB is Lens is Clear but Valve is with Color.

    I did not understand the conformity, but I judged by the position of the bottom petit.

    I felt like I could assimilate with Reflector.

    The rest is durable.

    I hear that Mimic Valve is vulnerable to heat?.

    There is also a story saying that if you attach Position it will come off with heat.

    Left at the bottom of the photo is attached and Right is different in Size but it is the one before mounting.

    Because I forgot to take a picture before cutting and cut out from the movie, the size is different.

    They are the goods that the Valve of mirror finish emits light in orange usually by having performed the Plating which penetrates light on the Valve surface only at the time of lighting. When this existence is got to know for the first time, it is fairly felt epoch-making. Even when it is used for the
    > Clear lens and a Smoked lens, at the time of putting out lights, existence of a Valve is not mostly clear anymore. Although Clear-lens-ization of the
    > Blinker thinks fundamentally that there are probably no Merits other than the meaning as a Dress-up up, if it becomes, I will think that the Orange bulb which is transparent perfectly and visible from a Lens will not be in putting the cart before the horse.
    Isn't it indispensable to replace parts to an LED Valve or a Plating bulb collectively? Although it is
    >, in LED, the directivity of light will be strong, as it is, the goods which can achieve the function of a Blinker firmly will become expensive, and it cannot expect the visibility more than an electric lamp at least.


    If it arranges with the firm brand item which can feel easy about them, is it probably total and become expenses of about 20000 yen? Since the light is not necessarily always switched on like a Position or a Tail lamp, the
    > Blinker will be a meaning called reduction of incidence to a Battery, and if it thinks in respect of cost effectiveness, it will quite be a question.

    Primarily, if there is a budget of only that, the Battery of sufficient Quality can prepare in reserve and, moreover, change will come out. Since it is
    >, it is judgment that a Plating bulb is enough for the time being in itself.

    Including this product, if every Plating bulb is compared with still outrageously expensive LED of a thing a little more expensive than an ordinary Orange bulb, it will be inside of tolerance.
    They are a part to be plated and the mere Level which is functioning enough as a Safety Department article although it becomes somewhat dark.

    They are the goods that the Valve of mirror finish emits light in orange usually by having performed the Plating which penetrates light on the Valve surface only at the time of lighting. When this existence is got to know for the first time, it is fairly felt epoch-making. Even when it is used for the
    > Clear lens and a Smoked lens, at the time of putting out lights, existence of a Valve is not mostly clear anymore. Although Clear-lens-ization of the
    > Blinker thinks fundamentally that there are probably no Merits other than the meaning as a Dress-up up, if it becomes, I will think that the Orange bulb which is transparent perfectly and visible from a Lens will not be in putting the cart before the horse.
    Isn't it indispensable to replace parts to an LED Valve or a Plating bulb collectively? Although it is
    >, in LED, the directivity of light will be strong, as it is, the goods which can achieve the function of a Blinker firmly will become expensive, and it cannot expect the visibility more than an electric lamp at least.


    If it arranges with the firm brand item which can feel easy about them, is it probably total and become expenses of about 20000 yen? Since the light is not necessarily always switched on like a Position or a Tail lamp, the
    > Blinker will be a meaning called reduction of incidence to a Battery, and if it thinks in respect of cost effectiveness, it will quite be a question.

    Primarily, if there is a budget of only that, the Battery of sufficient Quality can prepare in reserve and, moreover, change will come out. Since it is
    >, it is judgment that a Plating bulb is enough for the time being in itself.

    Including this product, if every Plating bulb is compared with still outrageously expensive LED of a thing a little more expensive than an ordinary Orange bulb, it will be inside of tolerance.
    They are a part to be plated and the mere Level which is functioning enough as a Safety Department article although it becomes somewhat dark.

สินค้าที่มีผู้เข้าชมมากที่สุด