Reviews
Fits: HONDA CROSSCUB(JA45), HONDA CROSSCUB , HONDA SuperCUB110 JA10 series, HONDA CROSSCUB110
If you like this design, you can use Recommendation
Since I don't have a favorite exhaust system, I painted OEM Heat Guard in Black I was thinking of using it, but I happened to find it in Shopping I prefer the type of sale, but I buy the current one because it's already gone The shape is the same as the OEM and the construction is solid The accuracy of the hole is also no problem, I was going to pontificate on it because of the Black Gel Coating A small paint chip in the depths of the hole that seems to have been caused by the drilling process, and a round hole that was made around the hole I had a Wound (probably made out of a hole saw), so I painted it Matte Black, and then painted it in Matte Black I did View detail
A few more beautiful than the OEM tail lamp?
A seven year old GRASS TRACKER
The Handlebar and Tail lamp that were not so good
exchange
Male car's tail lamp
Was that right? Was it?
View detail
Combination Warning
I wanted to make the area around the rear amps Compact and replace it with the OEM Bracket I bought it because I thought it would be easy to do
Under normal circumstances, the effect would have been as expected, but due to the following conditions, the result was It was very difficult to install
Combination with a rear carrier
I had installed a rear carrier as a retrofit, but it is incompatible with this product When you install this product, you need to bolt three upper parts and one center, but the upper three parts are not compatible Tandem seat, Rear carrier and the material in question:Three FRP brackets need to be fastened Among them, the rear carrier needs to be mounted at a delicate angle, and if it is not, it will not be able to be fixed at all I couldn't get the Screw in the middle of the two places to fasten In addition, in my case, I have a separate ETC body on my rear carrier and the cord Please be careful if your vehicle is equipped with the Carrier It is
Combination with License PlateFrame
When you are using a License PlateFrame, the Number doesn't fit perfectly It is designed to fit the dimensions of the License Plate without a Frame If it is removed, it is early, but because I wanted to leave it daringly, I shaved the Bolt hole of Body a little I installed it by biting the Rubber on the part that floats against it
There was an unexpected Trouble, but Harness of Exclusive Design It's really just a matter of connecting them together and achieving the Compact look without being unnatural
If you understand the above, you will get the results you expect
View detail
Just size
I've tried a couple of tails that fit my current Seat Cowl, and I've settled on this one!
For those who are looking for a middle size that is not too large and not too small, although small processing is necessary is good
View detail
Truly Male car!
Wiring is hard to see, looks good, good texture with the License Plate base is good.
Just not being easy to install, Design seen from directly above, Top mounting Bolt is dirty.
After carefully allocating Torque, I mounted it and tried running and the top mounting Bolt was gone.
Originally a bad Bolt so bite RubberWasher and fix matte Flange bolt with UNut.
After that, it was decided to replace it as soon as it was running out in about a month.
There will be individual differences, but vehicles containing solid sediments require careful attention to installation and bulletproof.
But I think that it is good from Lineup of Male car if you exchange Tail lamp of 250 TR.
View detail
A great substitute for the stock fender
It looks really good, as it is shorter and more compact. The quality of the material used is sturdy and firm. The paint blends well with the stock black color of my W800 View detail
Perfect fit for W800.
As my title describes it, I'm not sure if it's the same as the OEM one but it looks and performs exactly the same. The only thing that I have to subtract one star from my review is the lock nuts are not included, so hopefully you have ones at home or you will need to remove from the old seat, or go buy at a hardware store. I really hope they include 2 lock nuts which would cost less than a dollar since the price is not that cheap anyway, they could have included them. View detail
Oscar goodness
As good as the short rear fender. Great fit, great value. Looks so much cleaner than the original front fender. But you have to live with lot more water on you when it rains. Exactly what I wanted! View detail
Good old Oscar
Oscar plastics are usually first grade after market parts. As this little fender shows again. Looks very sexy on my beloved bike! Good value for money! View detail
Tiny
I installed 250TR for Cafe racer. OEM's Tail lamp was lavish with a large bracket attached, so I replaced it for it and it made it clearer. The installation was easy with only changing the coupling. Since there is no reflector attached, I purchased a reflector separately from the Male car and installed it. View detail
I like the minimalist design of this chain guard. It matches the look of their front fender. However, the position of the guard is just a little off centered. it doesn't sit directly centered over the chain, so it doesn't completely protect you or the bik
I like the minimalist design of this chain guard. It matches the look of their front fender. However, the position of the guard is just a little off centered. it doesn't sit directly centered over the chain, so it doesn't completely protect you or the bike from chain grease spray! View detail
The fender clears the stock Battlax tire on the new SR400 by a couple of centimeters. The width of the fender at the mounting holes is a little narrow though. But since it is fiberglass, it had enough flex/give to allow me to mount it to the forks. I'm no
The fender clears the stock Battlax tire on the new SR400 by a couple of centimeters. The width of the fender at the mounting holes is a little narrow though. But since it is fiberglass, it had enough flex/give to allow me to mount it to the forks. I'm not sure if I'm stressing the fiberglass and whether that will reduce the lifespan of the fender. I hope it doesn't crack! View detail
Good product, newly well prainted was deliver with plastic and box to prevent damage during the shipping. Today just fixed onto my Tricker XG250, look great. I love my new look of my bike now. A suggestion to manufacturer, if able to make bigger screwed h
Good product, newly well prainted was deliver with plastic and box to prevent damage during the shipping. Today just fixed onto my Tricker XG250, look great. I love my new look of my bike now. A suggestion to manufacturer, if able to make bigger screwed hole on the blinker position will be even perfect, cause my bike using original blinker, and is to close to the exhaust. Overall this item look great on tricker. View detail
Good product, newly well prainted. Today just fixed onto my Tricker XG250, look great. I love my new look of my bike now. A suggestion to manufacturer, if able to make bigger screwed hole on the blinker position will be even perfect, cause my bike using o
Good product, newly well prainted. Today just fixed onto my Tricker XG250, look great. I love my new look of my bike now. A suggestion to manufacturer, if able to make bigger screwed hole on the blinker position will be even perfect, cause my bike using original blinker, and is to close to the exhaust. Overall this item look great on tricker. View detail
Larry and transformation
XG250 TRICKER 's crunchy haunchiko Style has been improved considerably! Because OEM's Front fender can not be used as it is, it is not easy to put the front half in a bagasse and the back part of the back is made with Mud Flap. On rainy days you will almost receive no mud Shower from below.
After that is PsychoMask? It has become wanting that one too ~
View detail
If you are replacing the fender without removing the wheel, it gonna take some time since the bolts are installed on the inner side of the forks. Use the smallest wrench and it can barely turn the bolts bit by bit. The look and the build of the fender
If you are replacing the fender without removing the wheel, it gonna take some time since the bolts are installed on the inner side of the forks. Use the smallest wrench and it can barely turn the bolts bit by bit. The look and the build of the fender is quite nice. But the fender are cut from the composite after the paint work. therefore you can see the cut mark on the edge of the fender. It is no big deal if you gonna repaint it with color match your bike. But if you have a black edition W800, be prepare to sand off some of the sharp edge and repaint before installation. View detail
The fitting was very easy and it fit perfectly. It has a slimmer look after replace the bulky tail light , the indicators and also with the shorter fender.
The fitting was very easy and it fit perfectly. It has a slimmer look after replace the bulky tail light , the indicators and also with the shorter fender. View detail
It does what is supposed to do. Starting a new seat this will help me not to ruin the original one, and to easily switch between them. For the one's in doubt, received the part within 7 days form Japan to Portugal. Perfect service!
It does what is supposed to do. Starting a new seat this will help me not to ruin the original one, and to easily switch between them. For the one's in doubt, received the part within 7 days form Japan to Portugal. Perfect service! View detail
This is for use with Oscar's Slim Side Covers and possibly with your own home fabricated ones. Installation was a little difficult as the instructions are in Japanese and the diagrams/pictures are not helpful. Some of the wiring had to be re routed throu
This is for use with Oscar's Slim Side Covers and possibly with your own home fabricated ones. Installation was a little difficult as the instructions are in Japanese and the diagrams/pictures are not helpful. Some of the wiring had to be re routed through the frame in order to fit. After about 30 minutes of tinkering around I finally got everything tucked away and snug. View detail
To install these side covers, it is required that you use the Electrical Equipment Holding Plate (W-EP1). You will also need 2 K&N air filters (W-RC-0981) and a K&N breather filter (62-1020). In addition, you will also have to install new jets and tune yo
To install these side covers, it is required that you use the Electrical Equipment Holding Plate (W-EP1). You will also need 2 K&N air filters (W-RC-0981) and a K&N breather filter (62-1020). In addition, you will also have to install new jets and tune your carbs to make up for the added air. Straight forward install. There are directions online on how to remove the stock air box. Some of the electronics get installed on the holding plate then everything gets tucked snug. These are flexible and fit well using your existing bolts/screws. View detail