Reviews
For domestic cars, the included color is sufficient.
If it is to be used on a domestic car, I think the included colors will cover it.
There is a Bolt for fixing on the STAND side, but there is no Screw hole on the Adapter, so it is easy to come off.
View detail
Great Looking & Practicable Spool for Stands
I was very impressed by the quality, I thought for the price the metal quality would be ok, but it's very good. I install it on my new +5 swingarm on my monkey and it fits nice and tight. Highly recommended, will make life much easier with a stand. View detail
good
My car is Hayabusa Suzuki The existing short clamp is dangerous because the car is heavy, but after changing to a non-gyner product, it is possible to stand stably View detail
RearMaintenance
I have been using JTrip's STAND for a long time and have two types of Hooks. Now that I have a new hook on my car Both Sides, I needed a hook on the STAND side to match the new hook, and I thought the Rubber hook I purchased this time would be suitable for that. I have actually used the Rubber hook and it was a good decision because I only need about half the force I used to use. Another good point is that it does not get scratched. View detail
I'm not sure when it was lost.
I bought it because one of the four was gone and the other was cracking.
It explains that double-sided tape makes it harder to remove.
If so, I wish they would put it on from the beginning.
It was a hassle to put it on, so I used Vinyl Tape to prevent it from coming off.
View detail
Small Stand Hook.
I installed this Stand Hook on my SC59 CBR1000RR, and I have noticed that if the Stand Hook is long enough, the whole Swing Arm weld often flies off when the bike falls over. This Stand Hook is very small and I think it will minimize the damage when it falls over. I slip down once after installing the Stand Hook and the Stand Hook was not damaged. I also use the Rear Stand made by the same company, but the Stand Hook is not so small that it is difficult to lift up, and I think it is very easy to use. View detail
diversion
It was installed in the STAND of J-TRIP.
There was a rattle, so we eliminated the rattle with an appropriate Bracket.
View detail
Looks strong
If you order this Check your hooks diameter first, Looks strong and When lift up, it's solid without shaking. Don't forget to check the internal diameter size of the swing arm's hook and then jive it out of the two models from j-trip View detail
A constantly evolving Manufacturer
from before I've never done this before. is used
I have repurchased Matte Black from STAND, a collaboration between Nankai Parts and J-Trip!
When I received it in my hand and compared it with
Plating mirror surface was missing.
It looks cloudy like Uniqlo plating.
Or is there a secret that makes it rustproof?
The area of the Rubber on the receiver is now larger.
I think you can tell from the pictures.
Constantly evolving Manufacturer J-Trip
(Incidentally, DAYTONA part number 25298 has a 20mm Adapter on the front stand.
J-Trip is φ15, 17, 19, 22, 24, 27
DAYTONA is φ15.5, 18, 20, 22, 24, 27
Yes, it is subtly Gap!
I want to make it as close to the Stem hole as possible, so if you see this review, please give it a try.
Just 20mm is delicious in XJR1300 and FZr1000, so older Yamaha models would be good!
View detail
SV650 in '99 car.
As long as the width is positioned properly, the Swing Arm can be used perfectly without interference or rattling. View detail
Easy to use
I was using STAND for the first time, but I got used to it and replaced it with V-receiver.
This type can be hung on the Hook while the vehicle body is tilted, so for the first time, it feels the same as STAND and Large.
This will expand the scope of work.
View detail
A little processing was required.
The inner diameter of the Adapter seemed to be a little small, so I could not install it, and since I did not want to cut down the STANDBODY side, I used a Leutor to cut down the inner diameter of the Adapter I purchased this time so that it would be large enough to fit. Although I was disappointed with the product itself, I am glad that the Adapter only was sold, even if it requires a little modification, because without it, I could not STAND-UP safely. View detail
Needs a little work.
The inner diameter of the Adapter seemed to be a little small, so I could not install it, and since I did not want to cut down the STANDBODY side, I used a Leutor to cut down the inner diameter of the Adapter I purchased this time so that it would be large enough to fit. Although I was disappointed with the product itself, I am glad that the Adapter only was sold, even if it requires a little modification, because without it, I could not STAND-UP safely. View detail
This will take care of most of the maintenance.
"I'm new at this. The name of the product gives the impression that it is for beginners.
It is not wrong, because it is an immense relief to know that the STAND will never be dislodged.
At the same time, there seems to be an atmosphere of embarrassment for a Veteran to use such a thing, as it is unnecessary for an advanced person who is used to maintenance.
But that's not true.
Since the rod for penetrating the Axle Shaft is threaded through this receptacle, it is not possible to replace the tire with this receptacle.
But...how much maintenance do you do that removes the Tire?
Even those who remove and maintain the tires quite frequently should not remove them more than once a week. (except for those who race hard).
When it comes to that, 'Never STAND off. This reception is usually sufficient for most maintenance.
On the contrary, I even feel that the frequency of maintenance will increase because it will become easier to Lift up.
I have actually increased my maintenance frequency.
I never had any difficulty with L-shaped receptacles to begin with, but still.
If you are a normal person who is scared to STAND-UP in an L-shaped receptacle, you will definitely see a drastic increase in maintenance frequency.
This is the first time for beginnersQuantity:Not a Set, when a beginner uses it for the first time. "Also." It is only optimal and is messy and convenient even for advanced users.
Not to brag, but it's been about a month since I bought this and I haven't used the L-shaped receptacle once.
If you don't remove the Tire, there is no need to use an unstable L-shaped receptacle.
View detail
the ultimate in the standard and a kind of ...
The L-shaped stand is the most popular and most universal type of stand for maintenance stands.
Very normal.
Among the maintenance stands marketed by various manufacturers, there is no one that is not based on this L-shaped stand.
The one made by JTrip has no outstanding features and is so ordinary that it is difficult to make an Impression.
Unless it is a special vehicle, everyone should buy this one.
There is nothing wrong with it, so please feel free to buy it.
If I were to point out a strong characteristic, it would be that it is narrower (smaller) than the L-shaped receptacles of other companies.
At first glance, this may seem to be a disadvantage, since it makes it easier to dislodge the device, but in fact, this may be the key to the problem.
This is because the area of contact with the swing arm is smaller, which increases the surface pressure, and it sometimes feels as if the swing arm is less likely to slip on the receiver.
I'm sure it's just a coincidence.
The overall size is small. When I applied STAND, a part of the receiver was in contact with the Sprocket and I couldn't turn the Tire." This is almost never the case.
(It should be a common mistake to try to shift it a bit and it comes off and knocks over the Motorcycle!)
It is not particularly spectacular, but it is a modest Recommendation.
View detail
J-TRIP V Receiving Help Rubber
It is a useful product for fixing the V-receptacle Gold object and gives me a sense of security. View detail
J-TRIP V receivedQuantity:Set
Easy to handle, but a tipping function would be better. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R
Without it, there's nothing to talk about.
Purchased for ZX-25R.
It cannot be used without it.
The feel is quite normal.
In the case of ZX-25R, there is a Horn next to the Stem, and depending on the model, the terminal of the Horn is in the way.
It may not be possible to use it, but if you loosen the bolt holding the Horn and flip it around, it should be fine.
View detail
Reliable V-Uke
I purchased this product for ZX-25R maintenance.
We purchased it at the same time as jtripSTAND.
It is very secure and easy to use.
For first-time users.
Recommended
View detail
No problem
I have not experienced any particular problems when using it. I use it for KATANA, which is heavy, and the shaft does not seem to be bent. The shaft is thicker than I expected.
If you use it as described in the Instruction Manual (using the receiver as narrow as possible), the shaft will probably not bend.
View detail